Tag Archives: fire at sea

Fire Fire Fire, or, “Hey, why does the stack look like that?”

Always a pucker factor when you look back from the stern while underway and see this.

Via USCG Pacific Area:

By PA3 Aidan Cooney – U.S. Coast Guard Pacific Southwest public affairs

U.S. Coast Guard Cutter Waesche crews battled a fire Sunday aboard the cutter that broke out during a scheduled deployment to the U.S. 7th Fleet’s area of operations.

Black smoke was reported at 5:18 p.m. (local time) and investigations revealed fires in the exhaust stack and nearby spaces.

The crew’s training and quick actions extinguished the fire after battling the blaze at sea for 90 minutes.

Five crew members reported minor injuries sustained during firefighting efforts and were treated by the onboard medical team.

“The rapid response and courageous efforts from the crewmembers aboard Waesche to quickly contain and extinguish the fire are a testament to the bravery and skill of this crew,” said Capt. Jason Ryan, Waesche’s commanding officer.

The extent of the damages and cause of the fire are currently under investigation.

Waesche arrived at Yokosuka, Japan, today. While at Fleet Forces Yokosuka, the cutter will undergo further inspection and potentially repairs.

The cutter is under the tactical control of the U.S. 7th Fleet as part of routine presence operations in support of the United States’ commitment to a free and open Indo-Pacific.

More photos here. 

Aluminum and sheet metal don’t hold up to fire very well

Last week I hit the water to check out how the coastline changed as a result of Hurricane Nate (I’ve since picked up some great pieces of beached cypress driftwood that likely came from the barrier islands and have several projects in mind for them, but anyway).

On the way back into Gulfport Harbor I saw the 87-foot Marine Protector-class patrol boat, USCGC Brant (WPB-87348) tied up at Coast Guard Station Gulfport. As she is different from our regular two WPBs home-ported here (Razorbill and Pompano), I made sure to grab a few shots of the visiting cutter, normally out of Sector Corpus Christie on the other side of the Gulf.

Then I saw this shot just a few days later of her wheelhouse from the port side…

From the USCG 8th District, Coast Guard Sector New Orleans:

NEW ORLEANS – Members from Gulfport Fire Department and a Coast Guard member extinguished a fire aboard Coast Guard Cutter Brant, which was moored in Gulfport, Mississippi, Wednesday.

At approximately 5 a.m., two Coast Guard members who were aboard the cutter became aware of the fire, located on the port-aft area of the vessel, and took initial actions to put out the fire using an on-board fire extinguisher.

Members from Gulfport Fire Department arrived on scene at 5:05 a.m. and extinguished the fire.

The two Coast Guard members on board the vessel were evaluated by emergency medical services and have been released.

“We are thankful no one was hurt in the fire,” said Cmdr. Zachary Ford, the head of the response department at Coast Guard Sector New Orleans. “Without the quick response and actions taken by the Gulfport Fire Department, this incident could have been much worse.”

The cause of the incident is under investigation.

The fire looked like it happened around officer’s country on the 87-footer and it is good to know that neither life nor limb was lost and she is still afloat. Looks like a trip back to Bollinger in Lockport is in her future, though. She’s just 15 years old and likely has another decade or two on her hull so you would imagine she could be rebuilt.