Tag Archives: marlin

Ruger Just Dropped the first 10mm Lever Gun

Ruger has done something a bit unusual by introducing a compact Trapper variant of the Marlin Model 1894, chambered in 10mm.

Marlin long marketed a modern Trapper model, a stainless carbine-length big-bore .45-70 Model 1895 that was short, quick-handling, and optimized for hunting or protection from dangerous animals, in 2018, but it went out of production when the company closed shop in 2020.

Ruger, once they rebooted the line in 2022 after acquiring the Marlin brand and putting in a massive effort to breathe new life into its iconic guns, debuted a new take on the Trapper with improvements, including a receiver-mounted Skinner Sight system and suppressor-ready barrel.

Since then, Ruger/Marlin doubled down on a short-action Model 1894 Trapper in either .357 Magnum/.38 Special or .44 Magnum/Special last year, and has come back with a 10mm variant headed into 2026.

The new Ruger Marlin 1894 Trapper in 10mm
Like other models in the Trapper Series line, it features a cold hammer-forged, 16.17-inch threaded barrel and receiver-mounted Skinner Sight system that provides rapid target acquisition. The muzzle is threaded 5/8-24TPI. (Photos: Ruger)
The new Ruger Marlin 1894 Trapper in 10mm
The Skinner Trapper series sight is crafted from solid stainless steel and is fully windage and elevation adjustable, shipping with a .125-inch Aperture installed. Four other aperture sizes are available. 
The new Ruger Marlin 1894 Trapper in 10mm
Weight is a handy 6.3 pounds, while the overall length is 33.25 inches. The 1:16″RH twist barrel should help wring out a bit more velocity from the 10mm Auto round. 

In addition to the standard Trapper series features, Marlin advises that this new model also has an upgraded fire control system. The sear is now e-nickel Teflon-plated, and the sear notch geometry in the hammer has been improved to create a smoother and more consistent trigger feel. Plus, in response to consumer feedback, the sear and trigger system has been redesigned to eliminate the trigger “flop.”

While revolver caliber lever guns, for instance, in .38 Special, .357 Magnum, 44. Magnum, and .45 Colt, have almost always been a thing; those chambered in rimless pistol cartridges are more rare. Further, although a couple of 9mm lever guns exist, such as the POF Tombstone and Taylor’s TC73, we can’t find any in 10mm, well, until now.

The 10mm Auto, already no slouch in a pistol, should boast an increased velocity of up to 250-300 fps in the Trapper compared to its use in a handgun, as vouched for in past experiments from the Ballistics By the Inch guys.

The MSRP on the new Ruger Marlin 1894 Trapper in 10mm is $1,599, a price generally lower at retail.

We have one of these inbound for testing, as well as some spicy 10mm, so stay tuned for a review.

Inside Remington’s super factory in Huntsville

I had the opportunity to look behind the curtain at Big Green’s plant in Alabama and see how everything from .22s to black rifles are born.

In 2014, Remington announced after an eight-month courtship it would invest $110 million into a 500,000-square-foot facility formerly used by Chrysler just outside of Huntsville with an aim to consolidate production.

Though Remington owns nearly a score of subsidiaries, just eight were selected to move to the plant in Alabama. Those included suppressor maker Advanced Armament Corp. from Lawrence, Georgia; Montana Rifleman from Kalispell, Montana; Tapco from Kennesaw, Georgia; LAR Manufacturing from West Jordan, Utah; Para-Ordnance from Pineville, North Carolina; DPMS from St. Cloud, Minnesota; the Bushmaster and Remington 1911 production lines in Ilion, New York; and a research and development facility in Elizabethtown, Kentucky.

In 2016, the Remington elected to close their Mayfield, Kentucky, plant and move the operations conducted there to Huntsville as well.

Currently, the Remington family of companies operates from 12 locations across nine states employing over 3,500 people and distributes its products throughout the U.S. and in over 55 foreign countries. Besides its original plant located in Ilion, NY, Huntsville — which employs almost 500 — is among the largest of their facilities.

And they let me go for a look inside.

More in my column at Guns.com. 

Hey, that gun looks like a Marlin but it doesn’t say so anywhere on it…

Over the nearly two century long history of the company, Marlin has always made their own guns. In fact, for a good bit of the 20th Century, Marlin even made guns under different names for outfits like Montgomery Ward, C and C, and Western Auto, which were the precursors for the big box stores of today. These guns were given ‘house’ names when being sold at bargain basement prices, but deep down inside they are still Marlins.

marlin glenfield 30
Marlin Model 336 right? Well, its actually a Glenfield Model 30A. Funny story about that.

Read the rest in my column at Marlin Forum