Category Archives: new guns

And just like that, the factory G19L is gone…

Posted on by Leave a comment

On the ramp-up to SHOT Show ’24, Glock’s big announcement for this year leaked out: the terribly named G49.

The so-called Glock 19L, using the compact G19 grip with a full-sized G17-length slide and barrel, has been a thing for years, with folks typically hacking a Glock 17 grip to make it a 15-shot capacity pistol that accepts G19 mags. Others used a standard G19 frame with an aftermarket G17-length slide that was compatible with the shorter frame.

The benefit was that, for many, the G19 is considered easier to conceal with its shorter grip/height than the G17, while the longer barrel and slide give the user a longer sight radius.

The G49 delivers on this concept.

The commercial variant of the G49. Note the “chopped” dust cover leaving an exposed chin on the slide, the standard fixed polymer sights, and the optics plate. (All photos: Chris Eger/Guns.com)

A crossover that blends the size of a Gen 5 G17/G47 top half with the compact grip frame of the Gen 5 G19, it takes standard flush-fit double-stack G19 mags. Note the ambi slide stop/catch and reversible magazine release.

I reviewed the gun back in March and it, well, shot like a Glock.

The thing is, the company only intended the G49 to be a limited run, and apparently that run has come to an end, with the G49 now being notably absent from the company’s website.

If you are a collector and don’t have one in the safe, you may want to get on that before the rest of the Glock mafia figure it out and prices jump.

Don’t Worry About the Gluger, the Gluger Can’t Hurt You (But the Gluger is Real)

Posted on by Leave a comment

The new Ruger RMX. (Photos: Chris Eger/Guns.com)

Ruger and Magpul have teamed up to produce a new 9mm handgun complete with a modular stainless-steel chassis system, which could be a universal adapter.

Dubbed the RXM, the new pistol is striker-fired and familiar, having the same general dimensions as many popular carry guns of the past few decades.

Compared to popular carry guns such as the Glock 19, S&W M&P9 Compact M2.0, and CZ P09 Nocturne, the Ruger RXM seems very familiar.

Diving deeper, it has a serialized Fire Control Insert that is independent of its grip frame, which gives it the flexibility to be easily swapped into different grips – which are developed and produced by Magpul. Optics-ready with a Tritium front sight, it runs popular 15-round G19-pattern mags.

Can you say, “chassis system?”

American-made, the RXM has an MSRP of $499. For that, you get a G19 Gen 3 feeling pistol, made in the U.S. (not in Brazil or Turkey), with probably the most popular double-stack 9mm magazine pattern, complete with steel night sights and an optics cut. Plus, the removable chassis system, backed up with grip modules from Magpul, gives it some serious modularity.

Ruger has long had problems bringing a 9mm pistol to market that people really, really liked. RXM could see that change.

I’ve been shooting one for the past few months, and the full review is after the jump.

So Kimber just went Full Staccato

Posted on by Leave a comment

Kimber originally started as a rifle brand and pivoted to making M1911-style pistols in 1994, debuting at SHOT ’95. Basic math shows that to be at least a 30-year run in the field. Along the way, they learned a thing or two.

With a new state-of-the-art facility in Troy, Alabama at their fingertips, and a couple of generations of hard-earned tribal knowledge in how to make a 1911, the company is now ready to run in the double-stack/wide-body 1911 game – after a warm-up with the slightly downsized KDS9c – and this week introduced the new 2K11.

Using an aluminum alloy grip module over an SST steel sub-frame, the slide is made of stainless steel, featuring an external extractor, front and rear slide serrations, and a factory optics cut in the RMR footprint. Running TAG Precision FiberLok 2 front sights with a suppressor-height serrated rear sight, under the hood is a beast of a deep crowned, fluted bull barrel.

You’ve also got a great GT aluminum trigger, ambi safety levers, an innovative tool-less guide rod/spring assembly, and common (2011 pattern) magazine compatibility.

I went to Kimber’s facility in Alabama over the summer to try out some early production guns and they ran, and ran, and ran.

My target at the sneak peek event this summer. That’s about 400 rounds just dumped methodically from 15 yards, standing, firing offhand, alternating left and right, often in rapid-fire mag dumps. I promise that Delta isn’t mine.

I’ve also been working on a test gun for evaluation for the past two months and it has done much the same.

My T&E gun, even with fixed sights, continued the trend, delivering boring hits on 3/4 reduced USPSA steel at 15 offhand. Full-sized targets were no problem at 25. Pushing to the 50 and working from a sitting barricade and bag position while applying some concentration in slow fire brought the above. Adding a red dot on this gun is something of a cheat code.

Full review in my column at Guns.com.

5.7 Survival Gun Goodness

Posted on by Leave a comment

Dark Mountain Arms may be a new firearms maker, but they come with a history of innovation, and their first product, the Stowaway, keeps that track record intact.

We’ve been following this incredibly light takedown rifle since it popped up on the radar earlier this year and actively testing one for the past couple of months.

A simple new platform from Fletcher, North Carolina’s veteran-owned Dark Mountain Arms, the Stowaway system is a single-shot, bolt-action takedown firearm initially being offered in 5.7 NATO, but as it is multi-caliber via an easy swap of a bolt face and barrel, future options on the table include 9mm, 4.6×30, .22 LR, .22 WMR, .17 Mach2, and .17 HMR.

An easily packable design with a weight of less than 3 pounds (2.8 pounds for the 16-inch threaded barreled rifle and 2 pounds flat for the 5-inch barreled pistol), the gun can be stowed in two primary pieces and then easily reassembled.

Full review in my column at Guns.com.

Stop Holding Your Breath on the Palmetto StG 44 Clone

Posted on by Leave a comment

Palmetto State Armory on Tuesday signaled the end, at least for now, of its love-hate relationship with rebooting the iconic StG 44.

The South Carolina-based gunmaker announced at SHOT ’23 that its clone would be the first in what they dubbed the “Battlefield” series of historic guns. PSA had enlisted Mac Steil, the “M” of the defunct Hill & Mac Gunworks, a small gunmaker that had been working on an updated semi-auto Sturmgewehr clone for the better part of a decade but never made it to market.

The StG reboot is now vapor ware. 

The guns were to be made with modern techniques complete with a threaded barrel, a long stroke piston operating tilting bolt action, an HK style trigger pack, wooden furniture, and the possibility of being chambered in 5.56 NATO, 7.62x39mm, .300 AAC Blackout, or the original 7.92 Kurz– the latter is still in production by Privi Partisan in Europe.

However, that bubble now seems to have popped, as PSA announced this week.

The TL;DR: They couldn’t make it work and the juice apparently wasn’t worth the squeeze.

Kicking around the R7CC

Posted on by Leave a comment

Kimber, best known to many for its assorted 1911 series pistols, introduced the original R7 Mako in August 2021. A striker-fired 11/13+1 shot micro 9 carry pistol with a polymer frame, it was pitched as an alternative to such handguns as the Taurus GX4, Ruger MAX, SIG P365, S&W Shield Plus, and Springfield Armory Hellcat.

Loaded with a lot of features that some of those competitors lacked, the Mako was optics-ready and had Kimber’s Performance Carry trigger, fully ambidextrous controls, a full wrap-around stippled texturing, and TruGlo Tritium Pro night sights.

I put well over 500 rounds through the original Mako, and it proved so accurate, comfortable, and dependable that I carried it for several months as an EDC.

I logged several hundred hours in the original Kimber R7 in 2021 in a ​​​​​DeSantis Slim-Tuk (#137) Kydex IWB holster that is cut on the top to allow the use of the MRD. Carrying in about a 3-o’clock position, my personal preference, the combo was comfortable and readily accessible, able to get off a just under 2-second par time to first shot on target from concealment. I’m sure I could work that lower with steady practice, even being an old wheezy guy.

Last month, Kimber introduced a more muscular version of the Mako, the new Carbon Compact line. Standard features of the new pistols are a pair of 15-shot magazines, an installed flared magwell, fully ambi surface controls, and three-dot TruGlo Tritium Pro night sights with an orange front ring and white rear rings.

The old Kimber R7 Mako, with its short slide and grip, was snappy but accurate and dependable, leading it to become something of an under-loved micro-9 option. The ergonomics of the new R7 Carbon Compact make it probably the best-feeling grip on a polymer-framed handgun on the market. Kimber knocked it out of the park, especially compared to the inaugural Mako variants.

Plus, while some polymer-framed handguns feel spongy – as if you could squeeze it flat if you tried hard enough – the carbon fiber-infused frame on the Carbon Compact feels rock-solid. This leads to the pistol being easy to control and get back on target.

More in my column at Guns.com.

New Walther 6-Pack

Posted on by Leave a comment

Walther this week is bringing back some vaunted iconic pistol models with a modern twist as well as debuting several new models.

The announcement comes as part of the company’s TEQ (Trigger, Ergonomics, and Quality) Fest, a national event celebrating the brand’s “commitment to performance and engaging customers across the country.” ​The event will highlight a half dozen new handgun models.

The new guns include the compensated PDP PRO-X Parker Mountain Machine; the PDP F-Series PRO which includes an aluminum magwell and Dynamic Performance Trigger; a return of the original Police Pistol (PP) in both .380 and .32 ACP; the very Bond-like PPK/S SD in .32 ACP, which will be the first in the PPK family to ship with factory threaded barrels; the PDP PRO-E, and the WMP SD, which is the only factory threaded-barrel semi-auto .22 Magnum handgun on the market.

More in my column at Guns.com.

There’s a New 10 shot Rimfire Wheel Gun Out There

Posted on by Leave a comment

Wisconsin-based Henry Repeating Arms this week expanded its line of high-quality double-action revolvers with a new rimfire model.

The Henry Golden Boy Revolver announced on Thursday, shares Henry’s lever-action rimfire aesthetic, featuring a deeply blued steel medium-size frame, genuine American walnut grip panels, and a highly polished brass backstrap and trigger guard. Chambered in .22 rimfire, they accept Short, Long, and Long Rifle cartridges, giving the user a bit of flexibility.

The new wheelguns will be available in both a square “Gunfighter” grip as well as an option for a Birdshead grip, and they sport 4-inch round-profile steel barrels.

More in my column at Guns.com.

Ruger in the 10mm Carbine Game?

Posted on by One comment

Further fleshing out its line of pistol caliber blowback-action LC Carbines that accept common handgun magazines, Ruger has gone 10mm.

The company introduced its current fourth-generation centerfire PCC platform in 2022 as a rifle variant of the Ruger 57 pistol in 5.7×28, then added a .45 ACP companion earlier this year at SHOT Show. Now, the news has come that the LC Carbine will be offered in the resurgent 10mm Auto chambering. Best yet, it accepts standard Glock-pattern double-stack 10mm magazines – even legacy 3rd Gen models.

Shown with a flush 15+1 and with a 30-round extended

The bad news is that the Ruger LC Carbine in 10mm has an MSRP of $1,049, which, while just $40 more than its .45 and 5.7mm brothers in the same family, is still kind of spendy for a PCC.

Still, there aren’t a lot of 10mm carbines out there, with the Ruger falling squarely between the $400-ish Hi-Point 1095 and the super Gucci $1,400 KRISS CRB – which probably gives the new offering a wide open market for those who wish to run the “centimeter” in a full-length barrel.

The Most Affordable 5.7 Carbine?

Posted on by Leave a comment

Florida and Wyoming-based KelTec late last week debuted the latest caliber offering in the company’s extremely popular SUB2000 carbine series.

Introduced in 2001 with a host of different common magazine well choices, the SUB2000’s biggest claim to fame is that it folds neatly in half for storage. Evolving into a second and currently third generation since then, the pistol-caliber carbine had previously been offered in 9mm or .40 S&W. Well, until now, at least.

The newest SUB2000 runs FN’s 5.7x28mm and uses common 20 and 30-round FN Five-seveN pattern magazines. It can also accept 55-round drums. Running from a blowback action, standard features include integrated M-LOK and Picatinny rails for accessories and optics. It is also threaded (1/2×28 TPI) for easy suppressor use.

When speaking to that asking price, the new SUB2000 with its $500 ask easily beats everything else in the semi-auto 5.7 carbine space, coming in cheaper than the CMMG Resolute and MK4, FN’s PS90, Ruger’s LC Carbine, and even KelTec’s own R50.

More in my column at Guns.com.

« Older Entries Recent Entries »