Tag Archives: national rifle association convention

Return of the Arm Pistol

Posted on by Leave a comment

Arguably the first large format AR-style pistol to hit the market is now set to make a return, no brace needed.

Firearms maverick Mack Gwinn Jr., a Vietnam-era Special Forces veteran, in the early 1970s acquired the rights to Colt-made IMP-221, a stockless, gas-operated bullpup pistol intended to provide aircrew with a compact survival gun chambered in .221 Fireball. While the Air Force had already scrapped the project, Gwinn made lemons into lemonade, adapting the design to use 5.56 NATO and accept standard AR mags, launching the Bushmaster Arm Pistol.

Bushmaster Armpistol ads started popping up in the early-1970s

The original Gwinn/Bushmaster Arm Pistol borrowed from both AR-15 and AK-47 designs, with its AR-style rotating bolt and AK-type long-stroke gas piston.

Based on the Colt IMP-221/ Air Force GUU-4/P air crew weapon originally designed at Eglin Air Force Base, the original Gwinn Firearms in Bangor, Maine produced the 5.56mm Bushmaster Arm Pistol “in limited quantities” for the USAF in the early 1970s before sending it to the consumer market. Just 20.63 inches long, the Arm Pistol had a lot of M16-style features in a very abbreviated bullpup format.

With the Arm Pistol long out of production and Bushmaster now in at least its third reincarnation since Gwinn sold the company in 1976, his son, Mack Gwinn III, has founded Maine-based Hydra Weaponry and returned a much-improved version of the design to production.

We caught up with the fine folks from Hydra at the recent 2024 NRA Annual Meetings in Dallas to “lay arm” on the new BMP-23.

Hydra feels the BMP-23 is the 5.56mm pistol that Gwinn Jr. would have built if he had access to today’s CNC machinery and technologically advanced materials.

21st Century Survival Gun

Posted on by Leave a comment

A simple new platform that will be headed to shelves this summer is from North Carolina’s Veteran-owned Dark Mountain Arms.

The Stowaway system is a single-shot bolt-action, take-down firearm that is initially being offered in 5.7 NATO but, as it is multi-caliber via an easy swap out of a bolt face and barrel, future options on the table include 9mm, 4.6×30, .22 LR, .22 WMR, .17 Mach2, and .17 HMR.

A packable design with a weight of less than 3 pounds (2.8 pounds for the 16-inch threaded barreled rifle and 2 pounds flat for the 5-inch barreled pistol), the gun can be stowed in two primary pieces and then easily reassembled.

More in my column a Guns.com.

Calling Mr. Roscoe

Posted on by 3 comments

One interesting new (well, rebooted) gun design that I am looking forward to testing this summer is the Heritage Roscoe.

A salute to the old-school pocket revolvers from the days of Mike Hammer and Philip Marlowe, the cigar-box-worthy .38SPL +P Roscoe looks right out of the mid-20th Century, clad in a deep glossy finish, classic round butt wood grips, fixed sights, and a 5-shot cylinder. Plus, it is available in both 2- and 3-inch models.

Best yet, it has an ask of $350, which should translate to $299-ish at retail.

Heritage, the Taurus subsidiary best known for its affordable single-action rimfire pistols and carbines, has launched the Roscoe line. This comes almost a decade after Taurus sunset its popular Model 85 5-shot small-frame revolver line– upgrading it to the larger 6-shot Model 856– and recalls the company’s history during the old Bangor Punta days (1962-72ish) when it was a sister to S&W and they shared tech.

More in my column at Guns.com.

The Glong gets a (much-needed) Update

Posted on by Leave a comment

One of the models that has been around since almost the beginning, the first Glock 17L, or “Glong” pistols – so named because they have an extended 6-inch barrel and corresponding 8.9-inch slide rather than the standard model’s 4.5/7.3-inch barrel/slide – was introduced as a first-generation gun back in 1988.

Moving up to Gen 2 in 1990 and Gen 3 in 1998, the pistol has been stuck in a world where Boyz II Men and Chumbawamba were still in the Top 40, largely replaced by the similar but more practical/tactical G34.

Well, that is until last week, when the G17L leaped over the Gen 4 standard and went right to Gen 5, complete with a Glock MOS optics plate cut at the 2024 NRA Annual Meetings in Dallas.

Yup, it’s back.

Other updates include the new-style Glock Marksman Barrel (GMB), a better trigger, and the deletion of the oft-detested finger grooves on the grip, replaced by the company’s more modular grip frame that accommodates a series of interchangeable backstraps.

More in my column at Guns.com.

Colt Fills the Stable with a New Grizzly, Kodiak, and Vipers

Posted on by Leave a comment

While everyone knows such long-legged wheelguns as the Peacemaker, Python, and Navy ’51/Army ’60 Series guns, Colt has seen dozens of short-lived revolvers in its company history. Handguns that just slipped in and slipped out just as fast.

For instance, in 1993, the Colt Kodiak, a limited-run of no more than 2,000 .44 Magnum that was built by the Colt Custom Shop in 1993 on the Anaconda series frame, hit the shelves and was never seen again.

In 1994 the Colt Custom Shop made a short run of just 999 Colt Grizzly models in .357 Magnum using a King Cobra frame with a Magna-Ported 6-inch Python series barrel.

Even before that, in 1977, the company made an aluminum-framed version of its 4th Model Police Positive– a revolver that itself was headed for cancelation. Using the small D (Detective) frame, it was light and rated for just .38 Special. Dubbed the Viper, it is one of the hardest of Colt’s “snake guns” to capture.

A circa 1977 nickel Viper

Well, for what it is worth, Colt just dropped new versions of all three of these guns on the market.

More in my column at Guns.com.