Coasties in New Places…and with new Cutters
Last week, the 154-foot Sentinel-class fast response cutter USCGC Frederick Hatch (WPC 1143), based in Guam, visited Tacloban in the Philippines on the occasion of the 79th Leyte Gulf Landing Anniversary while the larger frigate-sized USCGC Stratton (WMSL 752) called in Manila.
Hatch is the first of her class to visit the Philippines and will certainly not be the last as the FRCs are sailing far and wide, increasingly roaming around the West Pac. If you are curious, while calling at Tacloban she was 1,300 miles away from home, certainly within range as they have been logging patrols as long as 8,000nm in recent months.
Colleagues from the Philippine Coast Guard prepare to receive the crew of the USCGC Frederick Hatch (WPC 1143) at the pier in Tacloban, Philippines, on Oct. 19, 2023. In a historic first, the USCGC Frederick Hatch (WPC 1143) visited Tacloban, Philippines, from Oct. 19 to 23, 2023, and the crew conducted engagements marking a significant milestone in the enduring relationship between the United States and the Philippines. (U.S. Coast Guard photo by Cmdr. Ryan Crose)
From the CG PAO:
“The expanded capabilities of the Fast Response Cutter represent more than just advanced technology; they symbolize the bridge of cooperation and goodwill between nations. The FRCs and their dedicated crews regularly play a pivotal role in international diplomacy. These vessels, along with their highly trained and professional crews, are ambassadors of peace and collaboration, said Capt. Nick Simmons, commander of U.S. Coast Guard Forces Micronesia/Sector Guam. “They foster understanding and trust across borders, making the seas safer not only for our own nations but for all nations that rely on the freedom of navigation and maritime security.”
Hatch is the 43rd FRC and was commissioned in July 2021, so she is a new hull.
The class has been around since 2012 when the leader, USCGC Bernard C. Webber (WPC 1101) was commissioned and sent to Miami.
Of relevance, the fourth of the class commissioned, USCGC Robert Yeard (WPC 1104) joined the fleet in 2013 and is currently out of the water at the CG Yard in Maryland where she is getting an overhaul, offering some great shots of her hull form.
As detailed by the cutter’s social media page:
Every three years the Yered gets hauled out for some much-needed maintenance including a top-end overhaul of the mains and a full paint job. For the next 140 days, it will be stripped, sprayed, welded, shafts and props dropped replaced, and cleaned. As hard as this ship works and runs, it needs it.
For reference, all of the FRCs are built by Bollinger in New Orleans and the current program of record is 65 hulls, although plans are for at least two to be placed in uncrewed a Recurring Depot Availability Program (RDAP)– otherwise known as “ordinary” back in the day, due to empty billets across the USCG.
OPC Progress
Meanwhile, the future USCGC Argus (WMSM-915), the lead ship of the Heritage-class Offshore Patrol Cutter program and the sixth cutter to carry the name, is set to side-launch at Eastern Shipbuilding Group’s Nelson Shipyard near Panama City, Florida on Friday and proceed to finish fitting out in prep for commissioning.
Offshore Patrol Cutter ARGUS in launch position. Photo Eastern Shipbuilding Group
Offshore Patrol Cutter ARGUS in launch position. Photo Eastern Shipbuilding Group
The Heritage class is so-called as they are all to be named for historic cutters, a move I for one support and wish the Navy would take a hint when it comes to naming conventions. For example, the initial cutter Argus was one of the first 10 ships assigned to the U.S. Revenue Cutter Service, a predecessor service to the Coast Guard in 1791. Of the 10 original cutters assigned to the RCS, Argus spent the longest time in service. Subsequent cutters Argus were commissioned in 1804, 1809, 1830, and 1850.
Interestingly, the first OPC’s sponsor is not a politician but Capt. Beverly Kelley, USCG, (Ret). She was the first woman to command an American military vessel when she was piped aboard the 95-foot Cape-class patrol boat USCGC Cape Newagen in 1979.
Kelly, a University of Miami alum who graduated from OCS in 1976, seen on Cape Newagen’s bridge back in the day when the USCG still allowed beards without a profile. She went on to skipper the 270-foot cutter Northland (WMEC-904) as well as the 378-foot cutter Boutwell (WHEC-719) before retiring in 2006, capping a 30-year career that included 18 in sea-going billets.
More on the Heritage (Argus) class
OPC Characteristics:
• Length: 360 feet
• Beam: 54 feet
• Draft: 17 feet
• Sustained Speed: 22 Plus knots
• Range: 8500 Plus nautical miles
• Endurance: 60 Days
The main armament is an Mk 110 57mm gun forward with an MK 38 25mm gun over the stern HH60-sized hangar, and four remote .50 cal mounts.
I say replace the Mk38 with a C-RAM, shoehorn a towed sonar, ASW tubes, an 8-pack Mk41 VLS crammed with Sea Sparrows, and eight NSSMs aboard, then call it a day.
But no one listens to me…
Current spending on the overbudget and overtime project puts the ships at $704 million per hull. Hopefully, this can be amortized out now that a second yard (Austal in Mobile) is working on the cutters and a big reason why Eastern is so far behind is a mix of teething issues with the brand-new design (in particular non-compliant shafts delivered by Rolls-Royce for the first to hulls) and the 2021-22 supply chain/Covid slow down.
As the OPC program of record is for 25 cutters– replacing the smaller 13-strong Bear class and 16-member Reliance classes of cutters– and, knowing the Coast Guard will be the backbone of the force in blue water for the next 40 years, it is important to get it right.