Category Archives: edc

A Carry 22?

Posted on by 2 comments

Taurus introduced its newest, most carry-friendly, rimfire pistol earlier this year, and it aims to be both feature-rich and easy on the wallet.

The new TX22 Compact looks to be the hat trick in Taurus’s .22 LR handgun lineup, coming on the heels of the well-received standard and Competition-sized models. Unlike the other formats of the TX22, the new Compact runs a 13+1 round magazine and not the more commonly-used 16+1.

Developed as a handier version of its older brothers, it features a 3.6-inch alloy steel barrel that gives it an overall length of just 6.7 inches. In terms of dimensions, this puts it about the same size as a Glock 43 or Walther PPK but, at just 16.5 ounces, it comes in lighter than either.

This thing is pretty handy…and comes in at 16 ounces as shown.

Note that I compared it not to range plinkers but to carry guns. That’s because of the vibe that the TX22 Compact gives off. Unlike the rest of the TX22 series, which uses a three-dot sight system with a fixed front and two-way adjustable rear, the new TX22 Compact has a blacked-out serrated rear sight with a white dot front. Of note, this is the same sight used on the Taurus G3 series, which goes to say it is a standard Glock pattern. While no slouch on the range, the TX22 Compact was meant to be carried if needed.

While it may not be my particular cup of tea, there has been a move in recent years to produce dedicated self-defense .22LR ammo loads from Federal (Punch Personal Defense) and Winchester (Silvertip Rimfire) that give such guns more of a fighting chance. Plus, when it comes to both recoil and manipulation, those with low hand strength may find such a set-up ideal.

Moreover, and I love this, the TX22 is both suppressor and optics-ready, which is something tough to find in its size with a 13+1 round capacity for $350ish.

As shown, the dot-and-can-equipped TX22 Compact weighs just 20.8 ounces, loaded with 14 rounds of Federal Premium’s Punch Personal Defense rimfire ammo.

More in my column at Guns.com.

Glocks Fuddy Five Lurches into the 2020s

Posted on by Leave a comment

Glock first announced the .45 ACP-caliber G21 alongside the 10mm G20 and .40 S&W caliber G22 back in 1990, in a host of caliber changes that offered more than the company’s 9mm initial offerings– the G17 and G19. At introduction these were 2nd Generation guns, a series only gently updated from the company’s original debut in the mid-1980s.

I’ve been fooling with the G21 off and on for almost 30 years. My first was a Gen 2 AAZ-serialized G21 that I picked up in 1994, just as the federal AWB and magazine cap kicked in that chopped the standard mag capacity from 13 rounds to just 10. I kept that tough-as-nails .45 through Hurricane Katrina, during which and immediately after it was never far away, and only passed it on to its current owner in 2006, downgrading to a 9mm as my everyday carry.

My first G21, a Gen 2 model, is seen here in a low-res circa-2005 image. It worked when I picked it up 11 years before, ran everything I fed it in the interlude, and it is likely still working wherever it is today. Note back then they didn’t even have thumb grooves or an accessory rail.

Then came the Gen 3 Sport/Service models in 1997, which brought with them recessed thumb rests, finger grooves molded into the frame, and, eventually, an accessory rail.

The Gen 4 G21 arrived in 2011 with the company’s improved RTF-4 texture, interchangeable frame back straps, a reversible enlarged magazine catch, a dual recoil spring assembly, and a new – some would say improved – trigger

And since then, the G21 has been frozen in time, locked in 2011. In the meantime, the company introduced their 5th Generation guns – but only in 9mm (G17, G19, G19X, G26, G34 and G45), .40 S&W (G22, G23 and G27) and .22 LR (G44).

Now, Glock finally reached back and brought the old “large frame” 10mm and .45 full-sized pistols into the present.

Importantly, it is the first time the G21 is optics-ready, in addition to other Gen 5 enhancements that are long overdue.

More in my column at Guns.com

Everything you want in a P365, without the loudener

Posted on by Leave a comment

SIG has an optimized variant of the 17+1 round 9mm P365 XMacro headed to the market– minus the integrated compensator that a lot of folks detest– but with a few extra goodies.

The new P365 Macro TACOPS will have the slightly taller grip module of the XMacro that comes standard with a frame-mounted M1913 accessory rail for lights and lasers. The upper half is that of a standard P365 XL. What is totally new on the micro 9 is an integrated magwell for faster reloads, an extended slide catch lever, and, as it is a TACOPS package, four flush-fit 17-round magazines.

I ran into the P365 Macro TACOPS at SIG’s media event in Nevada last week on the eve of SHOT Show and got a sneak peek at the new pistol.

The P365 Macro TACOPS can be looked at as a P365 XMacro in which someone swapped out a regular XL top half and added a magwell and extended slide lever. The pistol shown wears a SIG RomeoZero Elite 1×24 micro red dot– which fits the Shield RMSc/Holosun K footprint of the series– with its optional metal shield installed.

More in my column at Guns.com.

A Pound of Prevention

Posted on by Leave a comment

On Monday, Taurus made the announcement they had a new, smaller version of the well-liked TX22 rimfire semi-auto pistol ready for the market.

The 16-ounce palm-sized TX22 Compact follows in the footsteps of the standard and competition models of the pistol with a flush-fitting 13+1 round magazine (10 rounds in restricted states) as well as an optic-ready cut that is compatible with the slimline Holosun K footprint. The sights are the same standard Glock pattern as used on the Taurus G3 and GX4 series.

At roughly the size of a Ruger LCP and with a 13+1 capacity of 22LR and zero recoil, the TX22 Compact could make a good “boat” or camp plinker and, paired with a good load such as Federal’s Punch rimfire, some will undoubtedly use it for personal protection.

I got a sneak peek of the TX22 Compact late last year while visiting Taurus’s new facility in Bainbridge, Georgia, and was impressed with it.

A well-tested prototype gun is seen here. Taurus did a ton of R&D here in the States on the gun and, in my hands, was a reliable plinker and flat shooter. (Photo: Chris Eger/Guns.com)

Looking forward to getting one of these in for testing, for sure.

18 Months with a Mini Bull along for the ride

Posted on by Leave a comment

I’ve been living with the Taurus GX4 micro compact 9mm for a year and a half on a daily basis and put well over a thousand rounds through it. It has surprised me, for sure.

Taurus introduced the GX4 to the world in May 2021, and I was able to get an early test model from the company slightly before. A good sequel to the company’s budget line of increasingly well-made and dependable G2 and G3 series pistols, the GX4 was more of the same, only smaller and with a better trigger.

When compared to more recently introduced double-stack micro 9s with similar magazine capacity, the GX4 was smaller than a lot of the big names, seen stacked side-by-side with the Springfield Armory Hellcat Pro, SIG Sauer P365 XMacro, and Kimber R7 Mako.

Designed for personal carry, the GX4 proved such an easy carry – just 24.8 ounces when fully loaded with 14 rounds of 124-grain Gold Dot– that it has become my go-to of late. Of note, that is the same magazine capacity as on the vaunted Browning Hi-Power, my first carry gun back in the late 1980s.

I’ve been carrying the GX4 in a DeSantis Gunhide Inside Heat, a bare-bones minimum IWB holster built from black saddle leather, and it just disappears. The pistol is, realistically, just slightly taller than a pocket gun but comes ready with 13+1 rounds.

More in my column at Guns.com.

Verdict on the New (and Improved) FN High Power

Posted on by Leave a comment

FN one-upped the now resurgent Browning Hi-Power race by distancing itself from the clone wars to deliver an improved and modern take on the pistol, the High Power (note the difference in spelling).

I’ve been looking at this new generation of the pistol over the past few months and, with 500 rounds and lots of careful evaluation and testing, have a lot to talk about.

Stoked with 17+1 rounds of Federal Hydra Shok Deep 135-grain JHPs in condition one, the High Power hit the scales at 43.5 ounces. While a hefty carry, for those who are fine with a full-sized pistol, you could do much worse than the High Power.

More in my column at Guns.com.

If you Could Carry a Top-shelf Target Pistol, Would you?

Posted on by Leave a comment

SIG’s design concept behind the P210 Carry was to “blend the historic lineage of its iconic Swiss predecessor with the ideal characteristics and necessities the modern consumer expects in a carry pistol.” In a brief explainer, the original M1911-sized P210 first hit the scenes around 1948 and was adopted by the Swiss Army (and others), soon becoming a landmark pistol prized for its accuracy, reliability, and simple elegance. Out of production in Europe by 2006, SIG started making Americanized P210 Target and P210 Standard models in 2017, complete with steel frames, some updates to the internals such as in barrel lug profile, and a full-length 5-inch barrel.

The SIG P210 Target

Where the P210 Carry switches gears is that it is smaller– using a 4.1-inch barrel and likewise trimmed slide– while keeping the same height. It sheds weight due to an alloy frame, coming in at 29 ounces (unloaded) compared to the 36.9 ounces of the P210 Target model. It also runs SIG night sights, has front and rear cocking serrations on the slide, and slim Houge G10 grips to augment the ergonomics added by the checkered front strap.

While only introduced this year, the P210 stands atop 80 years of firearms history when it comes to mechanically locked, hammer-fired, short-recoil-operated pistols, with a salute to Swiss firearms designer Charles Gabriel Petter.

And, after 1K rounds, I have some thoughts about how the P210 Carry handles and if you should use it for EDC or not in my column over at Guns.com.

Ye Olde Glock: Obsolete or Not?

Posted on by Leave a comment

Back around 2012, my carry choice was a SIG Sauer P229R, a 13+1, a platform that I had lots of experience with as I carried one and instructed others on it in my “day job” as a contractor with the Dept. of Homeland Security. While I owned Glocks already, they were in .45 GAP and .40S&W (hey, it was 2012).

Downshifting to the more compact G19 in 9mm, I picked up a brand new Gen 3 model and found it easy and even fun to shoot. Soon, it was my everyday carry. The reason was obvious. While roughly the same length and height as a Glock 19, a P229 loaded with 14 rounds of 147-grain JHPs hits my kitchen scales at 37 ounces. The G19, with 16 rounds loaded, weighs 31 ounces. Plus, with the striker-fired action, there was no need for working a decocker or the hassle of a hammer catching on clothing. The Glock was point-and-shoot while at the same time being more snag-free.

Fast forward a decade and the question is: is it still a valid carry gun? The answer may surprise.

If you don’t care about a red dot-equipped pistol or fingergrooves, the Gen 3 G19 still stacks up despite being a lot older. Not bad for a pistol introduced the same year the Beastie Boys released Intergalactic.

More in my column at Guns.com.

Everything old is new again: Pocket Pistol edition

Posted on by Leave a comment

I found this very interesting article by Frank Jardim over at Guns Magazine in their archives recently. It’s from 2019 so it isn’t out of date, but the meat of it is that he takes a circa 1908 pocket pistol– a Belgian Pieper Bayard– and stacks it against a KelTec P3AT.

The differences, in the end, are not that profound although the elderly gun is surprisingly still spry, although with misgivings.

Says Jardim:

Though separated by a century-wide technological chasm, the 1908 Bayard and Kel-Tec P-3AT are cut from the same cloth. Their .380 ACP caliber puts them on the top rung of pocket-pistol power and their extremely small size makes them easy to carry and conceal. If you don’t imagine yourself in a quick-draw confrontation where trying to disengage the Bayard’s awkwardly placed safety will cost you your life, then the Bayard is the better pistol for self defense in terms of accuracy and speed.

More here. 

G3C, G3X, G3XL…what?

Posted on by Leave a comment

In the past couple of years, Taurus has really upped its 9mm game with a trio of G3 pistol models offering affordable options for everyday carry.

All based on the standard G3 line – the budget gunmaker’s third family of striker-fired polymer-framed pistols following in the wake of the PT111 Millennium and G2 series – the G3C was introduced in 2020, with the “C,” for “compact,” denoting the fact that it was both shorter in length and height than the base model.

Then came the G3X, which was much the same as the G3C but with a fuller grip and larger magazine capacity, and the G3XL, which had the same grip and magazine as the G3C but with a longer slide, offering a better sight radius and more controllability.

For reference:

Left to right, the G3C, G3X, and G3XL. (Chris Eger/Guns.com)

Check out my take on the trio, what makes them different, and why it matters, over in my column on GDC.

« Older Entries Recent Entries »