Tag Archives: Colt Python 2020

On Deck for 2022: Colt Combat Pythons and S&W Firestorms

Posted on by Leave a comment

Although they haven’t “officially” announced them, both Colt and Smith & Wesson seem to have new handguns inbound for this year that mines at the tried-and-true vein of gun culture nostalgia.

Smith’s new CSX (Chief’s Special X?), a single-action-only subcompact 9mm that is hammer-fired, has an alloy frame, and a 10+1 or 12+1 magazine capacity, could be a hit with folks that don’t want polymer striker-fired micro 9s and are more familiar with carry-friendly M1911s such as the Colt New Detective or Sig Sauer P938.

The S&W CSX

It also, in my opinion, looks a lot like the old Star Firestar M43, although with a larger magazine capacity.

The Star Firestar was made from 1992-97, and would probably still be in production if the Spanish gunmaker was around as these were well-received little guns

Then there is the Colt Python with a 3-inch barrel.

While Colt produced the original Python in several barrel lengths between 1955 and 1994, including 2.5-inch snubs and commanding 8-inch Python Hunter, Python Silhouette, and Python Stalker models, the big I-frame snake gun rarely came with a factory 3-inch barrel. This was reserved for a short run of “California Combat” guns and a batch of 500 “Combat Pythons” made in 1988 for Lew Horton complete with a special “K” prefix serial number.

This circa 1974 Colt Python with a factory 2.5-inch snub-nosed barrel is sweet, but folks just went ga-ga for the 3-inch version, and Colt could do well to put such a thing back in production

The rebooted Pythons, introduced in 2020, including both a 4.25- and 6-inch model, with nothing shorter. With all that being said, the new 3-incher could prove both a hit with collectors as well as providing a more “carry friendly” Python for a new generation of wheel gun aficionados.

Either way, SHOT Show doesn’t start for another two weeks, so get ready for much more new gun news…I got my bags packed.

Python Shorty

Posted on by Leave a comment

While most of Colt’s world-famous Python .357 Magnum models were service-sized and longer, some more abbreviated variants were made.

First introduced to Colt’s 1955 catalog for a price of $125 and pitched as “a finer gun than you actually need” to “a limited number of gun connoisseurs,” the big double-action revolvers were most common with barrel lengths in 6-inch and later 4-inch formats. There were even some big 8-inchers that came along eventually.

Downsizing, Colt produced a few short runs of these vaunted revolvers with a 3-inch barrel known to collectors as “Combat Pythons,” and, off and on between 1955 and 1994, the 2.5-inch model, which still sported full-sized grips.

And they are beautiful.

More in my column at Guns.com.

My thoughts on the New Colt Python

Posted on by Leave a comment

So Colt brought the Python back from retirement after a 15-year hiatus. The old I-frame was a hand-fitted full-lug .357 with a tight lockup and superb finish.

The classic Python…

The new gun is different.

I handed several models both on the floor at SHOT Show and at the range on media day and I have to admit: the new gun looks like a Python and shoots like a Python but it just isn’t. Arguably, it is better, with modern CNC techniques producing a wheel gun reportedly stronger, more durable and made to tighter tolerances than the Python of old.

Changes that came as part of the reboot included re-designing the internals to trim the number of parts (14 less to be exact), thus streamlining the trigger group, while improvements were made to reinforce the new Python through the use of stronger stainless steel alloys. The results say Colt, is that the upcoming Python has a smooth-as-butter trigger, and is more reliable, easier to maintain, and more robust.

The “semi-bright” stainless finish on the new Colt Python after running hundreds of rounds on Industry Day. Colt tells us they fed the two shooting models on hand Monday over 4,000 rounds with no issues. (Photos: Chris Eger/Guns.com)

More in my column at Guns.com

Colt Coughs Up an *Updated* Python

Posted on by Leave a comment

Colt first introduced the full-lug six-shot heavy target style revolver in 1955 as something akin to the Cadillac of wheelguns. The big “I” frame .357 Magnum (although some .38 Special target models were made) was king of the block when it came to wheelguns for generations, which caused prices on used snake guns to skyrocket when the Python was put to pasture in 2005.

Now, after a 15-year hiatus, the Python is back in a 4.25-inch and 6-inch variant.

Importantly, the new Python has a lot of changes, which Colt says gives the revolver a smooth-as-butter trigger, as well as being more reliable, easier to maintain, and more robust.

Well, it sure looks like a stainless Python from the outside, anyway.

More in my column at Guns.com.