Alabama-based Kimber went double-stack 1911 in 2024 after at least a 30-year run in the field of making single-stacks. We have reviewed a couple of these excellent pistols since then and are past the 3K round mark on our original test gun with zero (0) hiccups to report, leaving us feeling good headed into the new Comp series.
Released in January at the SHOT Show in either stainless (SST) or black in both 5-inch full-sized (Government) and 4.25-inch Pro (Commander) sizes, with flush-fit 20- and 19-round magazines, respectively, as the name would imply, the Comp models all sport a compensated barrel and slide.
The 4.25 model has an overall length of 7.79 inches. (All photos: Chris Eger/Guns.com)
Weight is 33.4 ounces, even with a full-length rail on the frame’s dustcover.
This gun was a dream to shoot on the range. Full stop.
We ran a bit over 1,000 rounds through it and should probably talk about how we ran them. Coming after our trouble-free 3,000-round review of the full-length 2K11, we had a feeling the 2K11 Pro Comp would be able to comfortably digest just about any commercial load we could throw at it.
So that’s what we did.
A typical range box for our Pro Comp field trip:
Note the mix of rounds. About the only thing that unites them is that they are factory 9×19 Luger/Para loads. We’ve got some Speer, Hornady, and Federal JHP in there, Federal Syntech in a few different loads (the colorful rounds), Remington bulk pack 115 FMJs, CCI Blazer Brass 115s, some Winchester 124 NATO loads, et. al. We would typically try to mix up the rounds in each magazine to include everything from 115s to 150s from numerous loads. No issues.
If you prioritize a gun that looks great, shoots better than it looks, and gives you minimal heartburn while still being carryable in a pinch, the Kimber 2K11 Pro Comp is a “cry once, buy once” option.
It ran so well on the range and felt good in the hand that finding things to complain about is a chore.
Holsters for double-stack 1911-style railguns with a commander-length slide are a bit tough to find. The nose of the 2K11 Pro makes it even harder. Luckily, Kimber has gone the extra mile and stocks a variety of 2K11-specific OWB and competition holsters on their site from Blackpoint, Ghost Hydra, and Red Hill Tactical. Still, we’d love to see folks like Galco, DeSantis, Falco, Philster, Safariland, and Tenicor cranking them out as well, especially in an IWB format because this shorter 2K11 could make a great carry gun, giving the Staccato CS or HD C4X some serious competition.
Other than that, about the only sticking points that got under our skin were the fact that you had to leave the excellent rear sight at home when you opt for a red/green dot. Further, the mag release and safety lever were stiff right out of the box but wore in over time.
Featuring a built-in forward barrel port and matching compensated slide, the newKimber 2K11 Comp series offers a significant reduction in felt recoil while keeping the same popular features as the rest of the series.
Alabama-based Kimber went double-stack 1911 in 2024 after at least a 30-year run in the field of making single stacks. We have reviewed a couple of these excellent pistols since then, and are past the 3K round mark on our original test gun with no hiccups to report, leaving us more than happy to report on the new Comp series.
The guns, launching just in time for the upcoming SHOT Show, will all be chambered in 9mm and available in both 5-inch full-sized (Government) and 4.25-inch Pro (Commander) sizes, shipping with flush-fit 20 and 19-round magazines, respectively.
Each will also be offered in either a black DLC or matte stainless variant, giving Kimber four new 2K11 Comp models for 2026: 5-inch black (669278350783) and stainless (669278350806) and 4.25-inch black (669278350738) and stainless (669278350752) with an MSRP running between $2,345 and $2,499, with the DLC guns hitting the higher end, because of DLC.
A sampling, showing that big ol’ comp. (Photo: Kimber)
“The 2K11 Comp is the culmination of years of preparation and hundreds of thousands of rounds of testing to deliver the most fully featured comprehensive handgun we have ever produced,” said Pedi Gega, Director of product development, assembly, and finishing. “The new 2K11 family of compensated models creates the highest class of firearms for the discerning enthusiast and competitive shooter.”
Kimber sent us an SST (stainless) 2K11 Pro Comp model for testing.
The pistol looks great, which is no surprise as the 2K11 series is crafted with superb attention to detail, one at a time, by skilled technicians, not just slapped together. Being a Pro model, its 4.25-inch barrel gives an overall length of 7.79 inches. (All photos unless noted: Chris Eger/Guns.com)
Note the external extractor, ambidextrous thumb safety, and bumped grip safety, which are standard across the line.
Weight is 33.4 ounces, even with a full-length rail on the dustcover of the frame. Note the lightening cuts to the slide, seen previously on Kimber’s top-shelf Rapide series, which provide faster lock-up.
The most noticeable enhancement to these guns over the standard 2K11 series is the massive 0.16 square inch integrated compensator forward of the front sight. This feature noticeably reduces muzzle rise and felt recoil, plus it creates an incredibly fun and controllable shooting experience.
The integral comp is big enough to double as an ashtray if needed.
The four new compensated models also feature Kimber’s brand-new carbon fiber grip infused grip module that is compatible with corresponding Stan Chen Magwells. We found the grip to be aggressive but not overly.
The Comp guns also share the current 2K11 features, such as Kimber’s in-house toolless guide rod, an external extractor, a bushing-less, crowned, and fluted barrel, a GT trigger, and more.
The Kimber 2K11 Pro Comp SST 4.25 compared to the standard full-sized Black DLC 2K11.
And compared with the non-comped Kimber 2K11 Pro SST, which sports a Kimpro Granite finish and Kevlar carbon fiber grips. Released last August, this gun hinted at what the Pro Comp would become.
Note the top ends of the Kimber 2K11 Pro SST and Pro Comp SST
The Kimber 2K11 Pro Comp features a cover plate with an adjustable rear sight. A TAG Precision FiberLok 2 front sight with additional red and black fiber-optic inserts is included. All models ship with a TAG Precision RMR adapter plate that takes the place of the rear sight.
Our test gun shipped with two 19+1-round Checkmate Double Stack Ultra-Hi Capacity 126mm mags. Full-length models ship with a flush 17+1, and two extended 20+1 round mags. The mags, reverse 2011-compatible, are all metal, including an aluminum base pad and steel retainer for maximum made-in-the-USA durability and longevity. Word of caution: they are a beast to fully load.
The Kimber 2K11 Pro Comp has an easy takedown without tools due to its toolless guide rod system, a feature it shares with the rest of the series.
The aluminum match-grade skeletonized GT trigger has an advertised 3-to-4-pound pull. We found it broke at 3.6, with a short take-up to the wall and a crisp break. Reset is similarly short and is both audible and tactile. Kimber advises that the shoe length has been reduced by 3/32 of an inch, making for a more comfortable overall length. IMHO, the GT is the best production factory 1911 trigger on the market.
Check out the trigger pull and reset here:
How’s it shoot?
Well, we’ve only had the gun for a couple of weeks and have about 200 rounds through it thus far, so it is a little early to say, but we have experienced no jams and smooth shooting, with less recoil.
Stay tuned for more feedback as we up the round count.
Kimber originally started as a rifle brand and pivoted to making M1911-style pistols in 1994, debuting at SHOT ’95. Basic math shows that to be at least a 30-year run in the field. Along the way, they learned a thing or two.
With a new state-of-the-art facility in Troy, Alabama at their fingertips, and a couple of generations of hard-earned tribal knowledge in how to make a 1911, the company is now ready to run in the double-stack/wide-body 1911 game – after a warm-up with the slightly downsized KDS9c – and this week introduced the new 2K11.
Using an aluminum alloy grip module over an SST steel sub-frame, the slide is made of stainless steel, featuring an external extractor, front and rear slide serrations, and a factory optics cut in the RMR footprint. Running TAG Precision FiberLok 2 front sights with a suppressor-height serrated rear sight, under the hood is a beast of a deep crowned, fluted bull barrel.
You’ve also got a great GT aluminum trigger, ambi safety levers, an innovative tool-less guide rod/spring assembly, and common (2011 pattern) magazine compatibility.
I went to Kimber’s facility in Alabama over the summer to try out some early production guns and they ran, and ran, and ran.
My target at the sneak peek event this summer. That’s about 400 rounds just dumped methodically from 15 yards, standing, firing offhand, alternating left and right, often in rapid-fire mag dumps. I promise that Delta isn’t mine.
I’ve also been working on a test gun for evaluation for the past two months and it has done much the same.
My T&E gun, even with fixed sights, continued the trend, delivering boring hits on 3/4 reduced USPSA steel at 15 offhand. Full-sized targets were no problem at 25. Pushing to the 50 and working from a sitting barricade and bag position while applying some concentration in slow fire brought the above. Adding a red dot on this gun is something of a cheat code.
