Tag Archives: new handguns 2024

The best new Snub Gun on the market

Posted on by Leave a comment

Snub-nosed carry revolvers have arguably been around since 1849 when Colt hit the market with the “Wells Fargo” Pocket model. Now pushing into their 175th year, there is a reason they are still popular: a blend of simplicity, reliability, and concealability.

This year saw Diamondback Firearms introduce their sleeper Self Defense Revolver, a six-shot .357 Magnum all-stainless snubby that takes K-frame speedloaders, fits in J-frame holsters, and accepts common S&W grip panels from the latter as well.

The SDR is a good-looking gun. All the edges are melted, leaving virtually no sharp points and few snag points other than the exposed hammer spur.

We’ve been kicking an SDR around for several months and found it easily supportable, dependable in use and operation, and innovative with an easily removable cylinder assembly. Further, while not meant for long-range benchrest target shooting, it is accurate to fill the needs of your typical EDC snub gun.

And it works, these from the 15-yard mark, standing and unsupported

Did Diamondback knock it out of the park their first time at bat when it came to a centerfire revolver? Looks like it.

The full review is in my column at Guns.com.

Review of the Roscoe

Posted on by Leave a comment

Much like the long-discontinued Taurus Model 80 and Rossi Model 68, guns now some 30 years out of production, the Heritage Roscoe is a simple and rugged .38 revolver that looks good and doesn’t break the bank.

It has the look and feel of a vintage S&W J-frame but without the cost – and, unlike a classic Smith or Colt Dick, you can take it to the range and beat on it without losing any collector value. Plus, it has some modern features you didn’t find in those guns such as the transfer bar and heavy barrel profile.

The 3-inch variant runs an inch or so longer than a snub gun, giving a longer (4.97-inch) sight radius while wringing more velocity from the ammo used – all while being very concealable.

You can always get one and turn it into a budget Fitz Special, which seems like a great choice if looking for that.

Is it the best .38 for concealed carry or personal defense compared to more modern designs with shrouded hammers, better triggers, options for adding optics, and weight savings via the inclusion of aluminum and polymer? Not even close, but it can still clock in when needed.

It is no slouch in terms of practical accuracy and is rated to run .38 +P on occasion.

It’s nice to see the Heritage time travel with the Roscoe, which is a bit of fresh air, albeit with a twinge of cigar smoke to it.

Talk about an instant classic.

More in my column at Guns.com.

HK Has Entered the Micro 9 Game (7 Years Late?)

Posted on by Leave a comment

Germany’s Heckler & Koch finally dropped a commercially available micro compact 9mm pistol this week, debuting the thoroughly tested HK CC9 onto the market.

The polymer-framed striker-fired “one and a half stack” 9mm offers flush 10+1 and extended 12+1 capacity magazines, is optics-ready (RMSc/407k footprint) with a tritium front sight and a blacked out, serrated rear sight; and is somewhat modular through the use of interchangeable backstraps.

It is almost the exact same size as the SIG P365 (introduced in Jan. 2018), Springfield Armory Hellcat (Aug. 2019), and March 2021’s Ruger MAX-9 and S&W M&P Shield Plus. Then of course there are the more recent Canik Mete MC9, Taurus GX4, Stoeger STR-9MC, et. al, ad nauseum.

However, HK has a big up by saying they held to the same standards as their full-size duty pistols and tested the micro compact to the NATO AC/225 standards across 750,000 rounds. This meant running it in extreme temperatures, dust, sand, and mud, and “being dropped to simulate real-world conditions,” with the latter part seeming like the company was throwing a little shade at some other pistol makers.

So they may have just taken the time to get it right…

More in my column at Guns.com.

Meet Kimber’s New CDS9

Posted on by Leave a comment

Alabama-based Kimber has doubled the capacity of its well-liked Micro 1911 platform with a new CDS9 line – and I got a sneak peek.

The 9mm Micro 1911 began to appear in 2016, taking a page from the company’s earlier Micro Covert in .380 ACP. Well-liked, hammer-fired, slim, and with a profile that made easy friends with those looking to EDC without printing, these Micro 9s have been well-reviewed.

However, as single-stacks, they were limited in capacity to six or seven rounds.

That’s where the new CDS9 series enters the game, and changes it.

Rebuilt from the frame up with a more modern design that retains what people liked about the old Micro 9s – slim and compact profile, all-metal, hammer-fired – but with more capacity and better ergonomics, the CDS9 looks very familiar.

Stacking a legacy single-stack Micro 9 against a new CDS9. Still slim and trim but with a seriously upgraded capacity. (All photos: Chris Ege)

Kimber’s new CDS9 will initially be offered in two optics-ready models with fully ambidextrous controls, differing from each other by way of a TFS package – an extended threaded barrel. Both have an aluminum alloy frame, stainless-steel slide with a direct-mount RMSc optic footprint, an accessory rail for lights or lasers, and options for double-stack magazines with 10, 13, or 15-round capacities.

Now that’s a handful

More in my column at Guns.com.

Kicking around the R7CC

Posted on by Leave a comment

Kimber, best known to many for its assorted 1911 series pistols, introduced the original R7 Mako in August 2021. A striker-fired 11/13+1 shot micro 9 carry pistol with a polymer frame, it was pitched as an alternative to such handguns as the Taurus GX4, Ruger MAX, SIG P365, S&W Shield Plus, and Springfield Armory Hellcat.

Loaded with a lot of features that some of those competitors lacked, the Mako was optics-ready and had Kimber’s Performance Carry trigger, fully ambidextrous controls, a full wrap-around stippled texturing, and TruGlo Tritium Pro night sights.

I put well over 500 rounds through the original Mako, and it proved so accurate, comfortable, and dependable that I carried it for several months as an EDC.

I logged several hundred hours in the original Kimber R7 in 2021 in a ​​​​​DeSantis Slim-Tuk (#137) Kydex IWB holster that is cut on the top to allow the use of the MRD. Carrying in about a 3-o’clock position, my personal preference, the combo was comfortable and readily accessible, able to get off a just under 2-second par time to first shot on target from concealment. I’m sure I could work that lower with steady practice, even being an old wheezy guy.

Last month, Kimber introduced a more muscular version of the Mako, the new Carbon Compact line. Standard features of the new pistols are a pair of 15-shot magazines, an installed flared magwell, fully ambi surface controls, and three-dot TruGlo Tritium Pro night sights with an orange front ring and white rear rings.

The old Kimber R7 Mako, with its short slide and grip, was snappy but accurate and dependable, leading it to become something of an under-loved micro-9 option. The ergonomics of the new R7 Carbon Compact make it probably the best-feeling grip on a polymer-framed handgun on the market. Kimber knocked it out of the park, especially compared to the inaugural Mako variants.

Plus, while some polymer-framed handguns feel spongy – as if you could squeeze it flat if you tried hard enough – the carbon fiber-infused frame on the Carbon Compact feels rock-solid. This leads to the pistol being easy to control and get back on target.

More in my column at Guns.com.

New Walther 6-Pack

Posted on by Leave a comment

Walther this week is bringing back some vaunted iconic pistol models with a modern twist as well as debuting several new models.

The announcement comes as part of the company’s TEQ (Trigger, Ergonomics, and Quality) Fest, a national event celebrating the brand’s “commitment to performance and engaging customers across the country.” ​The event will highlight a half dozen new handgun models.

The new guns include the compensated PDP PRO-X Parker Mountain Machine; the PDP F-Series PRO which includes an aluminum magwell and Dynamic Performance Trigger; a return of the original Police Pistol (PP) in both .380 and .32 ACP; the very Bond-like PPK/S SD in .32 ACP, which will be the first in the PPK family to ship with factory threaded barrels; the PDP PRO-E, and the WMP SD, which is the only factory threaded-barrel semi-auto .22 Magnum handgun on the market.

More in my column at Guns.com.

There’s a New 10 shot Rimfire Wheel Gun Out There

Posted on by Leave a comment

Wisconsin-based Henry Repeating Arms this week expanded its line of high-quality double-action revolvers with a new rimfire model.

The Henry Golden Boy Revolver announced on Thursday, shares Henry’s lever-action rimfire aesthetic, featuring a deeply blued steel medium-size frame, genuine American walnut grip panels, and a highly polished brass backstrap and trigger guard. Chambered in .22 rimfire, they accept Short, Long, and Long Rifle cartridges, giving the user a bit of flexibility.

The new wheelguns will be available in both a square “Gunfighter” grip as well as an option for a Birdshead grip, and they sport 4-inch round-profile steel barrels.

More in my column at Guns.com.

Up Close with the new CZ P-09C Nocturne

Posted on by Leave a comment

CZ introduced the double-action/single-action hammer-fired polymer-framed P-09 series around 2013, and it has proved popular with “Czechnologists” ever since. However, an increasingly big drawback over the years is that it, as well as many of CZ’s other handguns, aren’t optics-ready.

About that.

While visiting with CZ during our Euro Trip earlier this year, we had the honor of seeing the updated P-09 series while it was still in pre-production. The best takeaways were a factory optics cut on the slide with co-witnessing iron sights, completely refreshed ergonomics, and backward compatibility with both legacy magazines and CZ’s Kadet subcaliber rimfire kits.

In a nod to the updated ability to carry a red/green dot– which is a superb sight option for low-light/night conditions– the new P-09 ORs would have a new name: the Nocturne.

I’ve been kicking around one of the production models for the past couple of weeks.

More in my column at Guns.com.

For you Mako fans…

Posted on by Leave a comment

One of the most underrated mico-9s out there has been Kimber’s Mako R7 series.

I extensively tested and reviewed one of the first models over two years and offered it, along with four similar guns, up when my mother-in-law went on a search for a carry gun– and she went R7 after her own range time on the samples.

Now, Kimber has introduced the Carbon Compact variants of the model, based on almost a decade of user comments and feedback.

The new R7 series gets its name due to the redesigned frame constructed with a carbon fiber-infused matrix that delivers superior durability (up to a 60,000 psi tensile strength) compared to standard polymer frames. This frame also gives the ability for a flared magwell and four interchangeable modular backstraps, both features that are big upgrades from legacy R7s. 

Standard features of the new pistols are a pair of 15-shot magazines, an installed flared magwell, fully ambi surface controls, and three-dot TruGlo Tritium Pro night sights with an orange front ring and white rear rings.

I had a chance to check out the Carbon Compact R7s on a trip to Kimber last month and, have to admit, they are pretty sweet.

Expect more on these in the coming days

The 10mm Baby Glock, Now in its 5th Generation

Posted on by Leave a comment

Whether straying into the backcountry or just a fan of the 10mm Auto, Glock has long had one of the smallest carry guns offered in that caliber and I’ve been kicking around its latest variant for a couple of months.

The Glock 29 first hit the market when the Stone Temple Pilots were in the charts and Val Kilmer was Batman. It has since evolved through two generational cycles to stand here today as the Gen 5 G29. Coupling the flat trajectories and renowned performance of the 10mm Auto– a cartridge that has never been more popular– with a proven and well-liked sub-compact handgun that can easily be carried concealed and still clock in with 11 rounds when needed, is a strong platform on which to stand.

There is a lot to like about the welcome changes now bestowed to the Gen 5 G29, and there is still room to grow, for instance, with an optics cut (perhaps with a direct mill RMR footprint, just saying), but it remains tough to beat for someone who wants to carry a 10mm.

More in my column at Guns.com.

« Older Entries