Marlin dates to 1870 and is one of America’s iconic and best-known firearms makers. Before its acquisition by the Freedom Group (Remington Arms) in 2007, Marlin had several subsidiary brands under its umbrella.
These included legacy firearms makers that it had purchased over the years, such as Harrington & Richardson, Hunter Arms, L.C. Smith, and New England Firearms. Other brands, on the other hand, Marlin invented from whole cloth, such as the Glenfield Products Division, an idea of then-company CEO Roger Kenna, who led Marlin from 1948 through 1959.
Hitting the scenes at a time when big box catalog sales were the Amazon of its day, Glenfield became a staple for outfits like Sears and J.C. Penney, back when they sold guns and every house on the block had one or more of their catalogs on the living room table.
I give you a circa 1972 JCPenney’s Christmas ad:
The Glenfield brand is back… (Photos unless noted: Chris Eger/Guns.com)
The original Glenfield models were based on Marlin’s standard catalog but offered in a more affordable package with fewer options. For instance, the Marlin Model 60, a popular semi-auto .22, was sold as the Glenfield Model 60, with a plainer stock that featured an engraved squirrel logo. Likewise, the Marlin 336 was also marketed as the Glenfield Model 30 with non-specified hardwood furniture rather than the walnut seen on the Marlin, and with minor style differences.
The concept proved popular with consumers, who got a good firearm at a great price.
Glenfield cruised along into the mid-1980s and was then quietly put to bed, but the rifles and shotguns made under the banner continue to circulate and have a soft spot with nostalgia-minded collectors. As an aside, my first sporting rifle that I purchased over the counter, looking back some four decades ago, was a Model 30A in .30-30.
With Ruger acquiring Marlin in 2020, resurrection was in the cards.
Nice to see the roll mark again.
“We’re excited to bring back the iconic Glenfield Firearms brand with a new product that reflects Ruger’s dedication to manufacturing affordable, American-made firearms for any and every hunter,” said Ruger President and CEO, Todd Seyfert, at the brand’s relaunch.
The Model A Rifle: Familiar Newcomer
Glenfield’s inaugural 21st-century platform is the no-frills Model A bolt-action centerfire sporting rifle, which is “highly inspired by” the Gen I Ruger American Rifle. Ruger introduced that platform almost 15 years ago, and it has been well-vetted by America’s hunters, with over 2 million sold since then.
The company tells us that the Glenfield Model A carries forward the most valued elements of the Gen I Ruger American Rifle but has an MSRP about $100 below comparable Ruger-branded rifles – all without skimping on features.
The current Glenfield Model A, in .308 Winchester, seen equipped. The series uses a splatter-finished Moss Green synthetic stock with sling swivel studs and a recoil pad.
Ruger has gone full walnut on an anniversary model of the company’s famed Mini-14carbine to celebrate more than half a century of the rifle’s production.
Designed in the late 1960s and early 1970s by Bill Ruger and L. James Sullivan, the latter one of the engineers behind the AR-15, the Mini-14 took visual and naming cues from the Army’s 7.62 NATO M14 battle rifle (albeit with mechanical cues from the M1 Garand), but was scaled down to fire a .223 Remington/5.56 NATO round.
Since its introduction in 1974, the gun has captured the public’s imagination and chalked up over 200 film and TV credits, making it an icon.
I mean, who can forget Colonel John ‘Hannibal’ Smith and his khaki tuxedo?
The new 50th anniversary model remains a modern variant of the Mini when it comes to its 580-series Ranch Rifle gas system and internals, while sporting a laser-engraved anniversary logo on the bolt, polished stainless steel accents, and full walnut furniture, including a wood handguard rather than the plastic one that was introduced in 1978. In an ode to the old and highly collectible “GB” models, it sports a bayonet lug and a birdcage style flash suppressor.
Note that the full-size walnut stock includes a wood top cover and has a slot cut to utilize an M1 carbine sling/oiler. Meanwhile, the gas block features a left-side sling swivel. (Photos: Ruger)
The 18-inch cold hammer-forged has a 6-groove 1:9-inch RH twist (rather than the old 1:7 twist) and ends in a 1/2″-28TPI threaded muzzle under the flash hider.
Sights include a ghost ring rear aperture and a non-glare protected blade front sight on the GI-pattern bayonet lug. Meanwhile, the receiver is drilled and tapped for mounting an included Picatinny rail.
The 50th anniversary Ruger Mini-14 ships with a hard case, two 20-round magazines, and scope rings with an MSRP of $1,399. For comparison, the standard sans bayonet lugged blued model with a simpler walnut stock and plastic top cover has an ask of $1,339 and ships with a 5-round mag.
We recently attended the SIG Sauer Next Event in New Hampshire and got the scoop on the company’s new hardware for 2025.
The new guns included SIG’s first entry into the double-stack 1911 pistol category, a soft recoiling .380, a “Fluxed” P365, modernized P226s, the return of the vaunted 516 rifle, a Cross Sawtooth in 6.5 PRC, an AR-10 platform in the spicy .277 Fury, at least three new suppressors, and a ton of new optics.
Below is a quick rundown, and you can expect much more on all these platforms in the coming days and weeks.
P211-GTO Series
Don’t let the name fool you into thinking this is SIG’s evolution of the P210. The new P211-GTO instead builds on the company’s 20 years of experience with the 1911 platform (exemplified by the new X-Carry series) but in a double-stack format.
Built with lots of buy-in from Team SIG’s pro shooters, the P211 runs P320 mags, has a Delta Point Pro footprint, a usable ambi slide catch, and sports a 3D printed muzzle compensator/brake at the end of the 4.4-inch bull barrel.
Plus, it’s an 80-series, which means it’s drop safe (rare in double-stack 1911s), but somehow still has a good 3.5-pound trigger.
Ready for USPSA Open competition divisions (or Limited Optics with the comp removed from the non-threaded barrel), it ships with one 23-rounder and two 21-rounders.
Unlike some guns in the same space, it has a steel frame with an aluminum rather than a polymer grip.
MSRP is $2,300, which is on par with a base model OA 2311. Just saying.
P365-Luxe Series
Probably the easiest-handling P365 on the market, the new P365 Luxe is a 12-shot .380 ACP with an X-length grip frame and an integral expansion chamber style comp. The result is a double-stack micro compact that runs smoothly and just hangs on target.
This one feels more like a .22 when it comes to recoil than a .380, a round that is notoriously snappy in small pistols.
P365-FLUX
SIG released a Legion-series P320 Flux Raider last year, just as the P365 Flux hit the market, so it’s a no-brainer for the company to debut a Legion-series P365 Flux this year. Billed by Ben with Flux as a “rifle in your pants,” it will be available in both braced pistol and stocked SBR formats, with the ability to carry 50 rounds on the gun when stored.
We were quickly and easily able to hit reduced plates at 50 yards from behind cover with one.
It sports a 6-inch slide (a first for the P365), but when the Flux is folded, it is still just roughly the length of a WML-clad Glock 17.
P226X Legion
Everyone who loves modern combat pistols has a soft spot for the P226, but the platform is a bit dated, pushing 50 years in service. However, the updated new P226X Legion (4.4-inch barrel) and P226X Legion Carry (3.8-inch barrel) include X5 compatibility, optics-ready slides, XRAY3 day/night sights, and bull barrels with 35/35-degree reverse target crowns. You also have the Legion treatment complete with Gray Cerakote and enhanced ergos.
Plus, SIG plans a dozen different SKUs of these guns with options for user-adjustable AX1 single-action-only or AX2 DA/SA trigger systems.
The new SIG P226X Legion models will come in both 3.8-inch and 4.4-inch lengths as well as DA/SA and SAO triggers.
516 Mohawk
The original SIG 516 was an AR-15-style rifle that utilized a short-stroke gas piston system that sprang from the minds of the same guys who invented the HK 416. Renowned for its reliability, the 516 nonetheless was put out to pasture in 2019 while its 7.62 NATO-chambered big brother, the 716, endured and won huge (like India big) military contracts around the globe.
Now, the 516 is back in the Mohawk variant, which now includes a non-reciprocating side charging handle– ideal for use in prone or compressed positions– along with fully-ambi surface controls.
Still a piston gun with an adjustable gas system, it carries a 16-inch cold hammer forged barrel with a 1:7-inch twist rate, a free-floating M-LOK handguard, a 6-position Magpul DT stock, and a Matchlite Duo trigger.
6.8 Hyp rifle
SIG made headlines a couple of years ago with the MCX Spear and its GI brother, the M7 NGSW rifle. Giving the market a direct impingement AR-10 platform that is purpose-built for .277 SIG Fury– the commercial 6.8x51mm cartridge as used in the Spear/NGSW– the Hyp (Hy Pressure) is beefed up to be able to handle the massive 80,000 psi SAAMI spec maximum average chamber pressure of the round.
The cost is about $2K, which sounds high but is still a good bit cheaper than the MCX Spear.
Cross Sawtooth in 6.5 PRC
SIG debuted the sub-7-pound Cross Sawtooth last year, complete with a Proof Research carbon fiber barrel, 2-stage match trigger, AICS magwell, and a fully adjustable stock. New for 2025 is the gun in 6.5 PRC, a popular hard-hitting round that takes the performance of the 6.5 Creedmoor and turns it up to 11.
The new SIG Cross Sawtooth in 6.5 PRC ships with a 22-inch 1:8 twist barrel and weighs 6.9 pounds.
Endure, Hexium, and TiN Can suppressors
SIG debuted three new suppressors last week, including the low back-pressure Hexium as well as the .30 caliber 6-inch Endure, and 9-inch TiN Can titanium bolt gun suppressors. All are made with additive manufacturing techniques (3d printed) and have modular endcaps.
Available in both Inconel and titanium in 5.56. 300BLK, and 7.62 NATO, the new SIG Hexium series has a 3D printed core and a Hub taper direct thread mount. Note the external hexagonal pattern with black Cerakote.
The Endure features a compact length of 6 inches and a weight of just 11 ounces for enhanced portability in the field. Note the distinctive external topographic pattern with a black Cerakote finish.
The SIG TiN Can suppressor features an overall length of 9 inches while still hitting the scales at just 18 ounces. Like the Endure and Hexium, it runs a Hub taper direct thread mount.
Optics
SIG had a whole table full of advanced optics to debut at the event, including the Bravo6T BDX riflescope, Kilo Warp weapon-mounted rangefinder/ballistic calculator, Oscar6 HDX Pro spotting scope, and the paired Romeo8T-AMR red dot and Juliet3T-AMR magnifier.
The new SIG Bravo6T is a first focal plane riflescope with eTRAK elevation dial and onboard environmental sensors for pressure, temperature, and humidity. The company will be offering it in both a 3-18x44mm and 5-30x56mm format with easy-to-adjust turrets and a 35mm tube. Reticles include MRAD DEV-L 2.0 and Milling 2.0. Note the ALPHA5 mount with an LRF diving board. The ask is $2,399-$2,499, depending on the variant.
The Kilo Warp is SIG’s first on-gun rangefinder, able to sister to traditional glass via a diving board on the tube. After about 30 seconds of instruction, we were able to easily measure unknown distances and get an automatic dope that matched the glass to ballistics and atmospherics via Bluetooth to parent Bravo6Ts, then make no-problem hits at 100 and 650 yards from a Sawtooth. The ask is $1,999, which makes a Bravo6T/Kilo Warp combo a $4,500 piece of glass.
The Oscar 6 uses optical image stabilization to allow use offhand, which means in a pinch, you can leave the tripod at home. We were easily glassing to 1,000 yards with it and calling shots at 650. The cost is $1,999.
The Romeo8T-/Juliet3T-AMR combo runs right at $1K ($100 more if bought separately) and gives the user a red dot and magnifier system using SIG’s new Automatic Modified Reticle, which incorporates magnets to automatically transition the reticle when the magnifier is flipped into and out of view. It has a big 40mm lens while being billed as 30 percent smaller than similar sights. Sealed, they are IPX8 waterproof and fog proof and have a 50,000-hour battery life on a common CR123.
Back in 1986, the Colt AR-15A2 HBAR was where its at…
Back 20-25 years ago, fixed carry handle A2 style ARs with a 20-inch barrel were about the only thing you could find on the black rifle market, and even those were typically neutered by the Federal AWB (which ran 1994-2004) so that they didn’t have such evil features as a bayonet lug and shipped with 10-round mags. Still, they were good enough for DCM/CMP matches.
These days, with the M4 being the standard post-9/11, rifle-length fixed carry handle ARs are hard to find and only a few niche sources exist to get one– Bushmaster, Fulton, and H&R (the latter sold through PSA)– with prices starting at $1,299, and they are frequently sold out.
Talk about not being in Kansas anymore…
So, interestingly enough, Springfield Armory just introduced a very nicely done homage to the M16A2 in the form of the SA-16A2, which includes all the correct throwback features (forged 7075 T6 aluminum receivers, a 20-inch 1:7 twist government profile chrome lined barrel, round handguards with heat shields, a full-length fixed stock with rear compartment, a fixed A2 carry handle with adjustable/dual aperture sight, A2 F-height front sight post/gas block, rifle length gas system, a full-auto profile BCG with a phosphate exterior with a hard chrome-lined interior, mil-spec trigger, and a hollow GI grip) you expect.
The SA-16A2. (Photo: Chris Eger/Guns.com)
The SA-16A2 has some upgrades to enhance performance that the 1980s M16A2 never did, including an Accu-Tite tensioning system to cut down on the slop between the upper and lower receivers and M4 feed ramps.
The lower receiver features “Government Property” rollmarks as well as a non-functional “Burst” selector marking in an ode to the M16A2. (Photo: Chris Eger/Guns.com)
SIG Sauer this week officially introduced the version of the military’s new Next Generation rifle that won’t require talking to a recruiter.
Last April, the New Hampshire-based firearms giant made headlines around the globe by pulling down the award for the Army’s Next Generation Squad Weapons, a series of 6.8mm rifles and light machine guns and their companion suppressors that are planned to replace the current 5.56 NATO small arms in front line service. The rifle, originally introduced as the XM5 and recently renamed the XM7, is based on the company’s gas-piston action MCX platform and uses SIG’s in-house developed SLX suppressor system.
While the as-issued XM7 currently being sent to the Army runs a standard 15.3-inch barrel (as measured over its muzzle device) and SIG released to the public a limited run of suppressed 13-inch barreled commemoratives last year that required two tax stamps, the MCX Spear will be fully NFA-compliant in at least most of its variants.
We were able to get a sneak peek at the consumer MCX Spear late last year while visiting SIG’s plant in New Hampshire but were sworn to secrecy on the program.
I thought it was pretty cool.
Maybe not $4,000 kinda cool, but still pretty neat.
Modular 5.56 rifles are the way of the future. However, they are expensive by any measure. Just look at the Beretta ARX160, the FN SCAR, and the CZ Bren M2– the cheapest of which hit the low $2K mark and go far north from there.
Take for example the new SIG Sauer MCX Spear in 6.5 Creedmoor. While I dearly love SIG– my West German P226 has been shot out twice over the three two decades, each requiring a new breechblock and spring rebuild; while my daily carry pistol for most of the past six months has been a P365 XMac– they are very proud of their guns.
A kind of stepped-up version of the new MCX Spear LT, which was announced last year in 5.56 NATO, 7.62x39mm, and .300 Blackout, the new variants will be in .277 Fury, .308 Win, and 6.5, with the latter being the most interesting in my opinion.
The new rifles share the same broad strokes of the Spear LT, including AR trigger compatibility, a push-button folding stock, fully ambi controls, dual charging handles (left side non-reciprocating and rear AR-style), SIG’s SLX suppressor quick detach muzzle device, a full-length top rail, and the ability to swap bolt/barrels for caliber exchanges.
Couple that with a 6.5CM and you run a laser-accurate round capable of effective hits to 800 yards with little hold over
Of course, SIG says the gun will cost $4K, sans optics.
Enter the Israeli IWI Carmel, which is now in production in the U.S. as the prospect of importing it adds a lot of flies and 922R problems to the mix.
Complete with a folding stock, fully ambidextrous controls, and a rock-solid reliable short-stroke gas piston that keeps everything cleaner (and doesn’t use the gas ring systems of the SCAR), the soft-shooting Carmel will hit the $1,600-$1,800 range and be available later this year.
