Category Archives: edc

Springfield Armory Goes 19X, But Better

Springfield Armory and Croatian firearms maker HS Produkt have been working together in the polymer-framed striker-fired handgun space for a quarter century, first on the divisive XD series, then the well-liked Hellcat, and, since 2023, the modular Echelon. We’ve reviewed the full-sized 4.5F, the 4.0C Compact, and the 4.0C Comp since then and have found few issues to complain about.

They run.

Going beyond that, Springfield has had some notable success with the Echelon on the LE market, as witnessed by the December 2024 adoption by the St. Louis County Police Department—with nearly 1,000 officers—as the agency’s duty pistol in a $2.1 million contract, adding some fire to the company’s smoke about the new pistol’s reliability and performance. There have been other significant LE contract awards as well.

Now, the newest addition to Springfield’s Echelon catalog is the 4.0FC. It is the same length and general specs as the Echelon 4.0C, save for the fact that the grip is more full-sized, which bumps the height up just 0.385 inches while providing better ergos and a higher magazine capacity (17+1 rounds flush fit and 20+ extended fit vs 15+1 and 18+1). It is also an ounce heavier.

Springfield Armory 4.0FC with Vortex Defender ST
The new Springfield Armory Echelon 4.0FC. Note the Compact length slide assembly with a Full-sized grip frame that uses a shorter dust cover to match the slide without an odd underbite. (All photos: Chris Eger/Guns.com)
Springfield Armory 4.0FC with Vortex Defender ST
The pistol uses a 4-inch barrel, which gives it an overall length of 7.25 inches. Its longer grip allows it to use a 17+1 round flush fit or a 20+1 round extended magazine. 
Springfield Armory 4.0FC with Vortex Defender ST
Note how it stacks up to the G19X, which is fundamentally just a peanut butter G45. The specs are remarkably close to each other. Of note, the G19X and G45 have won numerous LE/mil contracts over the past several years. 
Springfield Armory 4.0FC with Vortex Defender ST
Also see how the new Echelon 4.0FC compares to a 15+1 shot Hellcat Pro micro 9, a cousin to the pistol. The Echelon, slightly larger, has a better optics mounting system and superior ergonomics, not to mention a higher magazine capacity. Note the pistols share the same style of the U-Notch rear sight system and grip texture. 

The rest of the review is in my column at Guns.com.

The PCC in your Waistband

The new Flux Defense P365 Ultra-Light Chassis System is engineered to be a standalone component, utilizing existing P365 firearms, slides, barrels, and magazines.

It uses a longer-barreled P365 (P365XL, TACOPS, and P365 FUSE) and 17- or 21-round magazines to give the user a holsterable and arguably concealable option that is 3 inches shorter and significantly lighter than an MP5K.

Plus, it only costs $499, a price that, when coupled with extra mags and a compatible longslide P365, puts you in the game for about $1,200.

Key Performance Features and Specifications Include:

  • Patented Speedload System: Facilitates faster reloads than traditional pistols or other PDWs, ensuring operators maintain an advantage.
  • Enhanced Capacity: Supports up to 50 rounds on the gun with optional magazine extensions, providing extended engagement capability.
  • Superior Control: A built-in shroud ensures a secure C-clamp grip and promotes flatter shooting, significantly improving accuracy and follow-up shots.
  • Lightweight, Durable Construction: Crafted from military-grade glass-filled nylon and S7 steel, featuring a Type 3 hard anodized shroud for exceptional resilience without added bulk.
  • Optimal Velocity Option: Features an optional 6-inch barrel to increase velocity, surpassing the performance of an MP5K.
  • Included 2.0 Adjustable Holster: Ships with the new 2.0 holster, designed for ultimate flexibility. It can be hard-mounted in the vehicle for quick access or carried with you, supporting both inside (IWB) and outside the waistband (OWB) configurations.
  • Compact & Extendable Design:
    • Collapsed: 9.75″ L x 4″ W x 1.375″ H
    • Extended: 18.5″ L x 4″ W x 1.25″ H
  • Ergonomic Length of Pull: 13.5″ for comfortable and stable handling.

I could see these being useful for personal protection details, high-value couriers, long-distance truckers, individuals who spend a lot of time in their vehicles in remote areas, and, well, anyone who wants to be the most well-armed person in the produce section.

Reviewing the best Budget Staccato Clones

European American Armory, in collaboration with Turkey’s Girsan, has been importing a new series of double-stack 1911s, dubbed the Witness 2311 line, for the past couple of years. Originally just offered in polymer-framed variants, which we’ve reviewed, EAA for 2025 shifted gears and began to market a pair of guns with alloy frames.

EAA Girsan Witness 2311 S Match and Match X
I give you, the EAA Girsan Witness 2311 Match Standard and Match X, both 9mm double-stack 1911s with metal frames and polymer grip modules that run from 2011-pattern magazines. Both run a Tungsten Cerakote on the frame. (All photos: Chris Eger)
EAA Girsan Witness 2311 S Match and Match X
Both are full-length single-action guns with skeletonized tuned triggers, extended beavertail, and commander-style hammers.
EAA Girsan Witness 2311 S Match and Match X
Further, they have oversized ambidextrous manual safety levers– needed on a single-action semi-auto– as well as a double-stack composite grip frame with a full-length accessory rail and dust cover under a Government-length slide. 
EAA Girsan Witness 2311 S Match and Match X
It’s in the slide/barrels format that these two guns are the most different, with the Match X showing off a big compensator “donut” while the Match S runs that big bull barrel. 

We had both of these interesting pistols on hand, so the obvious thing to do in a review was to bundle them together.

Quick Summary: The optics-ready Girsan-made EAA Witness 2311 Match series 9mm pistols are feature-rich and proved reliable and accurate in testing, offering a low-cost solution to anyone looking to get into the double-stack 1911/2011 game and wants a gun that will work as advertised.

Full 1,900-word review over in my column at Guns.com. 

Springfield Armory Hellcat, now in 380

The Hellcat was already well-liked on the micro-compact market and has been a solid choice for those looking for an EDC gun that splits the Venn Diagram of being both concealable and practical. The 380 version of the gun doubles down on that while providing a more subtle felt recoil impulse without sacrificing reliability or accuracy.

When it comes to rocks, the only thing we can find to throw at the gun is the fact that the short slide, coupled with its stout recoil spring, is a bit tough to rack, especially for those with compromised hand strength. On the upside of that, when mounting an optic, it allows more real estate to perform the task. We racked the pistol probably 100 times in testing from the optic and never felt it loosen or observed it shifting point of aim/impact.

The new Springfield Armory Hellcat in .380 ACP
The standout feature of the Hellcat in 380 is the size. It is a very slim gun, with the slide running 0.85 inches and the widest part of the grip just breaking an inch. Note the loaded chamber indicator. 
The new Springfield Armory Hellcat in .380 ACP
Sans optic and with its flush-fit mag installed, you are looking at a pistol that is right at 4 inches tall, which puts it just under the cutoff for a pocket carry piece. 
The new Springfield Armory Hellcat in .380 ACP
Speaking of magazines, the Hellcat uses stainless steel-bodied mags with rear witness holes and black base pads and followers. 
The new Springfield Armory Hellcat in .380 ACP
You see the 11+1, left, with its pinky extension installed, and the 13+1, right. Note the grip texture extends to the base pads. 
The new Springfield Armory Hellcat in .380 ACP
That allows 12 rounds on tap in one of the most compact .380s on the market. Federal Hydra Shok Deep 99-grain JHP shown. 
The new Springfield Armory Hellcat in .380 ACP
And the ability to EDC with the shorter mag inserted to aid in concealment, with the longer mag easily carried as a backup. 
The new Springfield Armory Hellcat in .380 ACP
The Hellcat .380 has a super short one-slot accessory rail. While it runs just inches long, Streamlight’s flush-fit TLR-6 and TLR-7 Sub are made specifically for the 3-inch Hellcat models, as well is the TLR-8 light/laser combo, so there are options out there. 
The new Springfield Armory Hellcat in .380 ACP
The surface controls are on the left side of the gun for right-handed shooters, including a slide catch, push-button magazine release (which is reversible), and take-down lever that rotates skyward. 
The new Springfield Armory Hellcat in .380 ACP
Disassembly on an unloaded Hellcat is simple via said take-down lever. Note the dual spring guiderod assembly. 
The new Springfield Armory Hellcat in .380 ACP
When it comes to ergos, you have textured memory pads forward of the trigger that are instinctual, as well as short but usable forward slide serrations. 
The new Springfield Armory Hellcat in .380 ACP
The high beavertail and undercut rear trigger guard allow for a corresponding high grip on the Hellcat, just under the slide. This helps mitigate recoil impulse. 
The new Springfield Armory Hellcat in .380 ACP
Only one model of the Hellcat .380 is available at launch, but it has excellent dovetail-mounted steel sights with a tritium/luminescent front and a Tactical Rack U-notch rear. It uses the common Shield RMSc optics pattern, and our test gun shipped with a Shield OMSsc sight installed. A compact and sleek design, the OMSc features a translucent panoramic roof over a T6 6082 aluminum body. It runs a 4 MOA dot with automatic adjustments and boasts a 9,000-hour battery life. 
The new Springfield Armory Hellcat in .380 ACP
The pistol ships in a cardboard box that includes a branded double-zipper case with room for the Hellcat and both of its mags. 

Of course, I have carried a Hellcat Pro for the past few years every day, so I may be a bit biased. But at least I am biased for a good reason.

The rearview on 18 months with the Rost Martin RM1C

We weren’t sure what to expect when the Rost Martin RM1C was first announced at SHOT ’24. Was it going to be a made-in-Turkey import with someone else’s name on it? A “game-changing” G19 Gen 3 clone but without its muse’s reliability? A vaporware gun that ever left the drawing board?

No, after 18 months and 1,500 rounds, we found it to be a solid American-made (from the land of Whataburger and Buc-ee’s, no less) double-stack 9 with lots of backend support and a lineage drawn from a proven design. Affordable, we found it dependable, accurate, and intuitive in use.

Plus, it is optics-ready.

That big ole Trijicon RCR actually costs about twice what the gun does, but both work.

About the only rocks we could toss its way were in the safety tab in the trigger shoe, which we have talked about and is easily overcome with a bit of training, and the very stout recoil spring, which is common in a lot of striker-fired pistols of its size.

Full review in my column over at Guns.com.

Kimber goes more carry-oriented with new 2K11 Pro series double-stack 1911s

Alabama-based Kimber looks to mine more gold from its popular new 2K11 double-stack series pistols by debuting five new, and more carry-oriented, Pro models.

The company debuted the 2K11 line in three models and two calibers (9mm and .45 ACP) last November with an aluminum alloy grip module over an SST steel sub-frame. The slide is made of stainless steel, featuring an external extractor, front and rear slide serrations, and a factory optics cut in the RMR footprint.

Running TAG Precision FiberLok 2 front sights with a suppressor-height serrated rear sight, under the hood is a beast of a deep-crowned, fluted bull barrel. Buyers also got a great GT aluminum trigger, ambi safety levers, an innovative tool-less guide rod/spring assembly, and common (2011 pattern) magazine compatibility.

The Kimber 2K11 standard model
The standard 2K11 is an elegant, if full-sized, tack driver that is slicker than an oyster with a head cold. (Photo: Chris Eger/Guns.com)

Since then, Kimber has added a Stainless model featuring the Carbon Fiber/Kevlar-infused grip module from MJD Solutions, the 2K11 Independence, and the Eclipse.

Now, the company has answered demand for a more compact entry to the 2K11 line in a big way with five new 9mm models, all sporting a 4.25-inch fluted and crowned barrel while offering 19+1 round Checkmate UHD magazines. Two of the new models will also be available in .45 ACP format, shipping with one flush 11+1 round mag and one extended 13+1.

All share many of the more top-shelf 2K11 features, such as its toolless guide rod, external extractor, disconnector ramp, and zero-creep GT Trigger that has a 3 to 4-pound break. All are optics-ready and ship with an RMR plate with RMSc, DPP, ACRO, and 509T available. As with the rest of the line, these guns are constructed, not assembled, by a single technician, from the ground up.

Let’s talk models.

These five finishes available are Coyote, Eclipse, Minotaur, Royal, and Stainless. Of these, the Coyote and Minotaur feature aluminum grip modules, while the other three use MJD carbon fiber and Kevlar molded grips, with the latter shaving off about 6 ounces in weight.

The Kimber 2K11 Pro Coyote
The Coyote. Note its Stan Chen magwell and Kevlar carbon fiber grips on an aluminum grip module. Hitting the scales at 40.9 ounces empty, it is available in 9mm ($2,699) and .45ACP ($2,799). Note the Coyote PVD slide and black DLC barrel
The Kimber 2K11 Pro Eclipse
The Eclipse with its stainless slide and black DLC barrel. Offered only in 9mm, it is lighter at 35 ounces due to its MJD carbon fiber grip module. Price is $2,345. 
The Kimber 2K11 Pro Minotaur
The Minotaur features a distressed Sandstone Cerakote finish over its stainless slide and frame with a black DLC finished barrel. Available in 9mm, it has an ask of $2,575.
The Kimber 2K11 Pro Royal
The aristocratic Royal has a bronze PVD finish and an MJD composite grip module and magwell. It is available in 9mm for $2,499 or .45ACP for $2,599. 
The Kimber 2K11 Pro stainless
Finally, the aptly named Stainless has a Kimpro Granite finish and Kevlar carbon fiber grips. In effect, it is the most attainable 2K11 Pro, priced at $2,245. It is only offered in 9mm. 

We have one of these inbound for a review, so expect to see more on these beautiful – and functional – new pistols in the coming weeks.

Smith reboots the 9mm snub nose

Out of production for more than a quarter century, the moon-clipped S&W 940 snub-nosed wheel gun has been resurrected – and modernized.

The original 940 was a 9mm companion to the classic .357 Magnum Model 640, a hard-wearing stainless five-shot double-action-only J-frame Centennial series revolver with a snag-free concealed hammer. Using a moon clip to hold the rimless 9mm rounds, it was fast and easy to reload while opening the revolver to a wide range of easy-to-find ammo.

While the 940 was only produced between 1991 and 1998, huge advances in bullet and propellant design have made 9mm more popular than ever, meaning that in many cases, the variety of self-defense loads available at local retailers in the caliber is greater than any other. With that in mind, rebooting the 940 makes sense.

Further, the new model ships with an XS Tritium night sight in front, something the old model never had. Oh, yeah, and it has VZ black cherry grips and a fluted barrel.

The new S&W 940 in 9mm is a five-shot DAO snub-nose with a concealed hammer. Note the 2.17-inch 1:10 RH twist stainless-steel fluted barrel. Height is a pocketable 4.38 inches. Weight is 23.5 ounces.

The MSRP is supposed to be $999 on these.

The Glock G26X is Real. The GS 26X is Coming.

The concept of the “Glock 26X” has been around for a while and is a favorite “hack” of the 80 percenters and 3D printing enthusiasts. The issue is that the G43X, while a great gun, is somewhat snappy due to its short grip. Additionally, aftermarket magazines that increase the capacity to 15+1 shots can sometimes compromise performance. Further, the standard G26, the famed “Baby Glock,” while a classic some 30 years on the market, is a bit stubby while also having an overly chunky grip that doesn’t allow more than 2-3 fingers, depending on hand size.

Enter the G26X, which combines the best features of the Glock 43X, 19, and 26 into one ideal EDC handgun. Built on the Glock 26 platform, it has an extended grip to match the length of a Glock 19, allowing the use of standard double-stack G19 magazines. The overall profile mirrors the Glock 43X, but with full OEM double-stack Glock magazine compatibility. It also features the same accessory rail as the 43X, making it compatible with subcompact weapon lights.

Lenny and the gang over at the Glock Store are building the loaded (serialized) frame, just add the G26 loaded slide and mags. All generations of Glock 26, 27, and 33 slides fit and function.

It is supposed to ship starting in September with a $150 ask.

Surprises in a G48 sized package

Glock released the slimline G48 a few years back, and I kind of passed on it, but when equipped with the new Aimpoint COA series enclosed red dot, it has changed my mind.

In all honesty, the G48 was a snoozer for me when it first came out. Don’t get me wrong, I had a chance to shoot one on several occasions, but I never felt a spark.

However, the new COA-equipped model, being optic-ready with decent steel sights, and sold with an installed American Aimpoint enclosed red dot on an interesting direct cut footprint, I felt the spark. Plus, the price point balances out to less than a G48 MOS with an aftermarket Chinese Holosun that uses a plate.

The COA has a wide field of view, and an exceptionally low deck that proves quick to “scoop in” the dot. The A-cut is simple in execution with fewer things to break than in other mounting systems.

The fact that adding Gen 3 S15 mags and a mag release gives you the bump in capacity without losing reliability is a win. We recently visited Shield in Montana and were impressed with their whole program.

When it comes to throwing rocks, the worst thing I can point out on the G48 COA combo is that the footprint and sights are limited to what you get in the box. Currently, there is no other optic that uses the A-cut footprint, and you cannot change out the rear sight for anything else. That may change but for right now you are painted into a corner.

Going past that, I think I may have a new EDC. Let me run some more rounds through it and circle back to you on that.

Yup. Feeling that spark.

Full review in my column at Guns.com.

New Springfield Armory Optics-Ready TRP AOS 1911

Back in the 1990s, the FBI was in the market for a pistol to equip its elite Hostage Rescue Team and regional SWAT teams, and the contract went to Springfield in 1998 for 500 M1911s crafted to very tight specs via meticulous hand fitting in the SA Custom Shop. Shortly after, the Marines ordered a batch of 150 similar pistols for its MEU(SOC) units. The HRT contract gun soon morphed into the Professional Model and eventually the TRP, which has gone on to become legendary over the past couple of decades.

SA’s Professional 1911s

Standard features on today’s top-shelf TRPs– going beyond the careful selection and fitment of components– include front strap checkering at 20 lines per inch, forward slide serrations, sighting plane serrations, the company’s Gen 2 Speed Trigger, a skeletonized hammer, premium sights, a straight mainspring housing, and G10 grips.

New for 2025 are eight optics-ready models, all equipped with an Agency Arms optics sighting system and offered in 9mm- both a first for the TRP. Priced at $1,999 across the board (we told you these were Springfield’s top shelf 1911s), there are full-sized all-steel 5-inch railed models in either black or Coyote Brown and in .45 and 9mm, as well as a lightweight Commander-length (4.25-inch) Carry Contour series in the same calibers and color options.

Springfield sent me a Coyote Commander-length Carry Contour TRP AOS in 9mm in this review; light and optic are not included.

In a nutshell, we found it to look good, feel great, and run like a gazelle. The slide-to-frame fit is legit, and the gun has no slop. The AOS system allows for lots of different optics, and it is great that SA is now making the TRP in a 9mm option, even if some consider such a thing in a 1911 platform to be an abomination.

The only rocks we can find to throw on this one are that the asking price of $1,999 is a bit steep, even in today’s inflated dollars, and that, perhaps a direct mount ACRO footprint would be a bigger hit.

The full review is over in my column at Guns.com.

« Older Entries Recent Entries »