Beretta has been quietly bringing one of the coolest .22LR semi-auto pistols to the market for the past couple of years, and we can finally talk about it.
But first, a little background.
The Jaguar name goes back to 1958 when Beretta introduced a series of gently larger rimfire semi-automatic pistols to complement its pocket .22s like the Model 418 Panther and tip-up barrel Minx. Like today’s Jaguar, the Beretta that carried the name last century was primarily intended for use as a plinker and target pistol, although it went on to be used by covert kinda folks in covert kinda operations.
The original Beretta Jaguar series 70 pistols were introduced in 1958 and remained in production into the 1980s. They are old school cool, for sure. (All photos: Chris Eger/Guns.com)
Meet the new Jaguar B22
We first saw the pre-production Jaguar B22 at a Beretta range event in 2025, but were sworn to secrecy on it. Like the original, it was cool and sleek. However, where the old 71 was art deco and classic, the new Jag was a rimfire muscle car, dripping with factory standard go-fast accessories from Tandemkross and built to go fast and perform while doing it.
The pre-production Jag, spotted in January 2025. Almost ready to be let out of its cage and shown to the public.
Fast forward to SHOT ’26 last month and the Jag was back at Beretta’s range event– but this time soft-launched and ready to purr.
The new platform, designed for plinking, target shooting, and training the next generation, will be offered in a Tac Metal (MSRP $749) and a Metal Competition (MSRP $969) model, with sub-variants in standard (15-round magazines) and state-compliant (10-round) versions of each, at the same price.
Both are built atop an innovative new modular chassis system and an M_LOK barrel shroud with a detachable accessory rail, making the B22 easy to disassemble, clean, and customize. Featuring dual-side ejection with a fixed barrel, it is designed to be reliable and accurate. They are internal hammer-fired (SAO) and blowback action.
The Jaguar B22 Tac Metal runs a 5.25-inch barrel and is 8.85 inches overall. Weight is 33.6 ounces. Equipped with adjustable fiber-optic sights, an extended barrel, and a 1913 Picatinny rail, it is suppressor and optics-ready, as you can tell.
The Jaguar B22 Metal Competition has a 5.5-inch barrel, giving it an overall length of 9.8 inches and a weight of 36.4 ounces. It comes standard with all the features of the Tac Metal but also adds A Tandemkross fiber front fiber optic, Tandemkross Steam Demon single port compensator, Tandemkross Accelorator thumb ledge gas pedal, and an adjustable Tandemkross semi-flat faced trigger with pre- and post-travel adjustments. It looks fast just sitting on the table.
Beretta says the Jaguar B22 Metal Competition is the first .22LR pistol explicitly developed in partnership with the largest educational shooting program in the world for youth, the Scholastic Action Shooting Program (SASP), in a process that has taken four years.
More direct from Tandemkross and SASP on the background of the new generation of Jaguar:
We hope to have a review of these in the coming weeks.
With a backstory that sounds more avant-garde art show than iron and steel, the Eagle model of the Elysien pistol has flown across the Atlantic.
At the 2024 IWA Outdoor Classics show in Germany, the Guns.com crew sat down with inventor and gunmaker Jan Lysak, who spent almost a decade of blood, sweat, and tears crafting something a bit different. Lysak’s company, Brno-based Creapeiron, introduced its first product at IWA: the Elysien pistol.
While sitting down and drinking plum brandy with Lysak, he spoke about his gun in a way that seemed a cross between Werner Herzog and the Riddler (Gorshin, not Dano).
Lysak only had seven €10,000 ($10,850) chrome DLC Elysien Genesis “Ment for Gods” (not a misprint) models – all named after gods from Ancient Greek mythology – and 99 €5,000 plainer black DLC Elysien Soul models on the schedule, with only vague notions about sending guns to America– one day.
What made it across to the States, brought in by the Arizona-based CZ Custom Shop, is the new Eagle model of the Elysien, which looks more like the chrome DLC Ment for Gods model but with a serial number 1 to 50, as in one for each state.
Engineered for balance and control, the Elysien features a sleek, sculpted profile that reflects both elegance and authority. (Photos: Chris Eger/Guns.com)
How about that bore axis? The Elysien uses a hammer-forged heavy barrel with a triangular profile inside a ported slide that allows a faster lockup.
Every contour is purpose-driven, delivering a natural grip, smooth handling, and confident ergonomics.
The Creapeiron Elysien Eagle Pistol is serial numbered 1 of 50.
Price? $11,999– and that is only until they sell out, which is likely as, first announced on Monday during SHOT Show, something like half were spoken for by Thursday.
As we have covered before, the current firearms works known and loved by collectors, hipsters, and savvy users alike dates to 1936 when its new factory was established to produce machine guns for the Czech Air Force. However, it became iconic in the West for its CZ 75 double-stack 9mm pistol.
We were fortunate enough to hold CZ 75 Serial Number 00001 when we visited the CZ factory in 2024, the gun that made the company a household name on this side of the pond.
Now, the new Legend repeats the same slab-sided Iron Curtain aesthetic while keeping the pistol’s internals and features modern, including a 16+1 round magazine, making it essentially a “post-B” gun in a “pre-B” body.
The new CZ Legend. Note the slab-sided frame and slide as well as the pebble-style grips. (Photos: Chris Eger/Guns.com)
The new Legend compared to SN 00001, which we saw in 2024 in the Czech Republic.
MSRP on the new CZ 75 Legend will be $1,399.
Bundeswehr Pistole 13
One of the big stories from late last year was that the German military (Bundeswehr) had selected the CZ P-10 pistol after it beat out a number of contenders to become the country’s new P13 sidearm.
Among the finalists bested were the Arex Delta and Glock G17 Gen5 for what could be an order of as many as 180,000 units. It will replace the HK-made P8A1, a version of the USP
CZ had the new P13 on hand at their booth last week.
In another shift from previous German service handguns, the new striker-fired P13 will arrive wearing an FDE finish instead of the traditional black.
CZ will work directly with its authorized German partner, POL-TEC GmbH & Co., to fulfill the order and provide the Bundeswehr with support for the new platform.
CZ 457 Target
CZ 457 rifles are known for their superb accuracy, but the new 457 Target, a fully adjustable, ISSF 3-Position competition-ready aluminum chassis co-developed with four-time American Olympic shooter Matt Emmons, raises that bar.
It includes a three-axis-adjustable pistol grip available in three different sizes, a side-tiltable buttstock with a five-axis-adjustable buttpad, along with a three-axis-adjustable, two-sided cheekpiece; and a forehand riser can be adjusted in three different axes. A 26-inch 12-groove .22 cold hammer-forged match barrel equipped with a diffuser is standard as is an adjustable 2-stage Flyweight trigger.
The MSRP for the CZ 457 Target rifle is expected to be around $3,600, which is still less than many European-made alternatives in the same class from folks like Anschutz and Walther.
After sunsetting the legacy SCAR last year, FN has the new generation of its venerable modular rifle for 2026 – and they are softer recoiling, accept suppressors, and don’t eat scopes anymore.
First fielded in 2008 as sporter (semi-auto) variants of the USSOCOM SOF Combat Assault Rifle, the 16S, 17S, and 20S were a top-shelf option on the commercial market until FN closed that line late last year. Let’s be honest, the original SCAR series was cool but had some issues, and a few needed a significant redesign to fix.
That brings us to the new SCAR line.
The old SCAR, top, compared to a new SCAR, bottom. (All photos: Chris Eger/Guns.com)
Among the new features is that the rifles are optimized for suppressors with a U.S.-standard muzzle profile and barrel shoulder. The platform’s short-stroke gas piston system uses a two-position adjustable gas regulator for improved reliability with cans and different ammo types. The adjustment is accessible via an access port in the heat shield. It works and is an upgrade from the old exposed gas block. Doubling down on the platform being suppressor-friendly as a selling point, FN even designed some new cans just for the SCAR, which we will get to in a separate article.
Another issue with the now-classic SCAR was the tendency to blow out scope crosshairs due to the, well, let’s just call it aggressive recoil. The new SCAR has a new (and lighter) hydraulically buffered modular two-piece bolt carrier that softens recoil. In testing last summer on the range between the old SCAR and the new ones, we could feel the chop decrease and the recoil impulse smooth out significantly.
We found the new SCARs to be much less choppy on the range in testing.
The new bolt carrier system helps with those tight repeatable groups on the 20S as well, which runs a heavy contour 20-inch barrel that now features 5R precision rifling with hammer-forged/chrome-lined durability. We were able to nail confirmed hits on target at 1,385 yards on a new gen SCAR 20 (6.5CM) in front of a crowd (no pressure) after just a few minutes of instruction.
FN realized that the handguard needed to be updated, so now the upper is a good bit longer with less exposed barrel and uses an integrated rail system, replacing the short M1913 rails with a ton of M-LOK accessory slots at the 3, 6, and 9 o’clock position – even on the SCAR 20S precision rifle. Plus, the 16S and 17S rifles now ship with a colorway-matching vertical foregrip.
When it comes to the new SCAR 20S, it runs a rubber over-molded Ergo pistol with a generous palmswell and a fully-adjustable stock.
Triggers have been upgraded with the 20S using an improved FN-designed two-stage precision trigger for better control and feel, providing a 3.5 to 4.5-pound trigger pull. The 17S and 16S have a single-stage trigger that has likewise been updated.
For ergonomics, the pistol grip is now compatible with AR grips and, while the 16S and 17S still ship with the traditional “Ugg Boot” side folding adjustable stock, an AR stock and tube system can be installed.
Yessss.
The new SCARs will accept different stock options.
This is a thing now for the SCAR…
There is even the possibility of using the SCAR SC stock.
You also have more QD cups in more places, and all the guns are “Nerch” (Non-Reciprocating Charging Handle or NRCH) variants.
Whereas the old SCAR was kind of limited in the functionality for southpaws, the new ones are fully ambi when it comes to the bolt catch/release, mag release buttons, and safety levers. Even the selector switches are modular now.
When it comes to durability and serviceability, the old SCAR used Hex screws that could strip, whereas the new ones run Torx, among other changes. We were advised that the testing protocol on these guns was no joke, and the new generation SCAR is designed and built with feedback from nearly two decades of end users, many of whom are “tip of the spear” types.
The new SCARs will be available in 15 different variants across the 16S (5.56 in either FDE, Gray, and Black), 17S (6.5CM or 7.62 NATO in FDE, Gray, and Black), and 20S (6.5CM or 7.62 NATO in FDE, Gray, and Black) models.
You gotta love those Gray models. Cue Jean-Baptiste Emanuel Zorg with “my favorite.”
As for those still hungering for the pistol variant, the SCAR 15P, it survived the great SCAR cull of 2025 but didn’t get any of the new updates and is available in 5.56 and .300BLK, with the latter just screaming for a now zero-dollar Form 1 SBR conversion.
Here comes the rough stuff.
While the new and old SCARs look very much the same – and that was done on purpose for continuity – very little is backward compatible between the discontinued traditional models and the new ones. About the only things that are shared/swappable between the two are the NRCH charging sled (if you had an NRCH model), barrels, magazines, the 9310 bolt and firing pin, and some small springs and pins.
If you have an older SCAR and love it, FN wants you to love it still, and they are supporting those guns for at least the foreseeable future. Remember, they are still making and supporting military/LE contract classic SCARs around the world.
MSRP on the new SCARs is comparable to that of the old guns, but they are still a more top-shelf price than, say, your average AR. The new FN SCAR 17S variants run $3,999, while the 16S is slightly cheaper at $3,799, and the long boy, the 20S, is $4,499. Of course, that is the MSRP, and you can bet that the reseller crowd is going to move into high gear with these, so watch out for the gouging. But if your heart is pure and you wish hard enough and look long enough, you could find one that fits the Ugg-sized hole in your gun safe.
I recently attended SIG’s Next event in New Hampshire last week and thought it was interesting that, among the boatload of new products introduced, the company debuted two very different models of the same pistol– the P226.
The P226 was designed in 1984 – before SIG had even established a presence in the U.S. – to compete for the coveted XM9 Service Pistol Trials to replace the much-loved but aging M1911A1. While the P226 was only narrowly edged out by the Beretta 92 over an issue of cost per unit, the U.S. Navy SEALs would soon adopt the pistol and use it for decades. Well beyond this employment by the country’s frogmen, the P226 rapidly became the sidearm of choice for law enforcement customers and savvy consumers – not to mention hundreds of movies, games, and TV shows.
With their smooth dust covers (sans accessory rail) and pebbled grips, for instance in this specimen from the Vault, the old-school P226 is instantly recognizable.
As the standard P226s cataloged by SIG today have evolved into something that outwardly looks a good bit different from the pistols of the 1980s and 90s, the company has gone retro for a limited run of 40th-anniversary guns that share all the same feature set of those original handguns to include an alloy frame, double-stack 15+1 round magazines, a double-action/single-action trigger system, and a 4.4-inch barrel.
The P226 40th Anniversary Model. Rather than plastic like the originals, the grips are special aluminum models supplied by Hogue. (Photo: Chris Eger/Guns.com)
The P226 XFive Reserve
The new P226 XFive Reserve carries many of the top-tier features of the all-steel American XFive line including an extended beavertail grip, undercut trigger guard, extended magwell, and a factory Delta Point Pro/RMR footprint while still keeping suppressor height XRay3 day/night sights. It also has an SAO system with a three-position AX3 trigger installed that is fully adjustable for pull weight and overtravel while the trigger shoe is removable and adjustable for length of pull.
However, while the standard P226 XFive is all matte-brushed stainless, the new Reserve variant carries a high-polish DLC coating on its stainless slide and frame, a look complemented by a blacked-out set of intricate GridLOK grip panels. Further, to help tame recoil on this 48-ounce (!) 9mm, the slide is fitted with an integral compensator/expansion chamber akin to that seen on the P320 XTen Comp.
The P226 XFive Reserve, with a high polish DLC coating rather than SIG’s more pedestrian nitron finish, is stunning. (Chris Eger/Guns.com)
The odd thing about carry guns, even in a day when the market is awash in micro-compact 9mm pistols like the P365 and Hellcat, is that the snub-nosed revolver still sells and sells very well. I have often carried one over the past 30 years, either as a BUG to my primary or when in a non-permissive environment.
This thing has tagged along with me more than I care to admit
Billed as the ultimate small-frame carry revolver, S&W debuted a new line of SAO aluminum J-frame snub-nosed wheel guns at the SHOT Show this year.
The new Ultimate Carry line is offered in a Model 642UC (stainless) and 442UC (black) Airweight Centennial format in a 5-shot .38 Special as well as a new 632UC and 432UC in 6-shot .32 H&R Magnum. All feature a fresh style of .140-inch XS Tritium front sight with a dovetailed .160-inch black serrated Novak-style U-notch rear sight and flush-cut “High Horn” VZ G10 boot grips. Going past that, the internals have been beefed up with titanium pins (rather than the standard aluminum) as used with the Scandium frame models to add durability over the years and a much-improved trigger pull.
They both look and feel great.
The weight on the Smith & Wesson Ultimate Carry is right at 16 ounces. Note the enclosed ejector rod shroud, beveled cylinder front edge which aids in carry, and VZ G10 boot grips that have been updated to provide a higher backstrap on the gun.
With that in mind, in a partnership announced at the SHOT Show, the organization and SDS have teamed up with Tisas to produce a special CMP M1911A1 model for sale to the public to help fund its national youth-focused marksmanship efforts.
The production of a new-manufactured M1911 for the CMP is big news. (Photo: Chris Eger/Guns.com)
The .45 ACP Government model, according to SDS, will be “a museum-grade reproduction of a mid-war M1911A1 as it was issued during the Second World War.” This will include “United States Property” markings, a Type E hammer, and reproduction WWII-style brown plastic grips – although an extra set of walnut double diamond checkered grips will be included with each gun.
In a nod to the special status with the marksmanship organization, they will be “CMP” marked. (Photo: Chris Eger/Guns.com)
The slide, frame, and small parts will be Manganese Phosphate finished, and there will be no MIM parts used in the manufacturing process. Like most Tisas 1911s, it will have Series 70 internals.
Sure, they are made in Turkey, but Tisas makes a hell of a 1911.
I thought this was one of the nicest guns at SHOT last week.
Beretta came to Las Vegas with something that any Selachimorphaphile, single-action handgun purist, model 92 fan, or budding USPSA competitor is sure to find of interest: the 92XI Squalo.
The Squalo – “shark” in Italian – earned its name, says Beretta, due to the “sleek and formidable nature” of the animal and its namesake 9mm pistol’s inclination to “stand out in a sea of competition.”
Optics-ready with a Vertec-style frame and DLC-coated trigger internals, it has a single-action-only trigger with a manual frame-mounted safety lever. A gray overall finish and custom Hogue G10 grip panels help pull off the moniker.
It comes standard with a Toni Systems flared magwell and has superb texture on the grip, akin to that of a shark’s skin, one could say.
Meanwhile, at the show itself, Beretta had an example decked out with gold accents and a comp, the latter giving it a very “Professional” kind of vibe
