Tag Archives: Handgun

Glock Gen 5 G17 and G19 drop on the market this week

Posted on by Leave a comment

It looks boringly like every other Glock out there, but when you look closely, there are actually a number of subtle differences. Most notably, the polygonal rifling is out and traditional ballard-style rifling is in. Also, the fingergrooves, standard since the Gen 3, are a thing of the past. I do like the flared magwell, though, but for the record I will likely stick to the Gen3 G19 that I have been using for years. If it isn’t broke…

From Glock:

On August 30, GLOCK, Inc. will be announcing the launch of our new G17 Gen5 and G19 Gen5 pistols.

The G17 Gen5 and G19 Gen5 pistols were inspired by the GLOCK M pistols used by the FBI and include many features the GLOCK community has been asking for. There are over 20 design changes which differentiate our Gen5 pistols from their Gen4 predecessors, including a flared mag-well, a new nDLC finish, the GLOCK Marksman Barrel, ambidextrous slide stop levers, and a grip which has no finger grooves.

These pistols will be available at your favorite GLOCK dealer beginning August 30.

A shot of the Glock M (that the FBI is issuing with a finger grip sleeve!) :

Marketing slick for Glock dealers (from my local Glock dealer).

They expect to retail these in-shop for $539

Chris Bartocci talks more about the Gen5 barrels below.

The best smart gun on the market is easily hacked

Posted on by Leave a comment

The German Armatix iP1 pistol, a personalized handgun design (smart gun), has gotten a lot of flack since it was introduced. While I bumped into the inventor (a guy who came up with a bunch of innovations while working for HK over the years) at a range a couple years ago, and have called, written and emailed Armatix at both their California office and in Germany for months, they won’t talk to me. Also, even though I have tried my best, I have never been able to handle one.

I did talk to a guy who had one in his possession for a long time in 2015 and he wasn’t impressed– telling me with an RF detector he could find the signal, turn it on and off, replicate it and do it all remotely as well as straight up hot wire it by taking the rear portion of the grip off and bypassing the electronic lock altogether, so that if someone who steals the firearm can simply take the back strap off, splice two wires, and the entire “smart” mechanism is disabled.

Well, low and behold, fast forward two years and a security researcher told Wired he was able to jam the radio frequency band (916.5Mhz) and prevent the gun from firing when it should, extend the authentication radius of its RFID puddle, and even defeat the electromagnetic locking system altogether with a simple $15 magnet placed near the breechblock. (More on that here).

So I sent that to the trade organization for the firearms industry to find out what they thought of it.

Their response in my column at Guns.com

Language added to NDAA to speed up 1911 transfers to CMP

Posted on by Leave a comment

An Alabama Congressman has managed to pass an amendment to the National Defense Authorization Act out of committee aimed at moving surplus Army pistols to the public.

In a statement from his office, U.S. Rep. Mike Rogers, a Republican that represents the Anniston area in Congress, announced his amendment to the NDAA has moved out of the House Armed Services Committee and is headed to the floor. The measure is designed to speed up the now two-year saga of transferring a stockpile of 100,000 surplus M1911 .45ACP handguns from Anniston Army Depot to the Civilian Marksmanship Program.

More in my column at Guns.com

Wanna see the Glock MHS entry?

Posted on by Leave a comment

With the Army’s Modular Handgun System contract now firmly in the hands of Sig Sauer, images of Glock’s entry for the M17 and M18 pistol have emerged and they have a number of differences from their standard offerings.

These include a lanyard ring at the bottom of the grip, black ambi surface controls, a lack of finger grooves, a manual thumb safety, extended mags, and a flat dark earth finish. The models offered outwardly seem like otherwise variants of the Gen 4 G19 in 9mm and G23 in .40S&W. Not pictured are threaded barrels, a contract requirement, or ammunition, which was provided by Federal.

More in my column at Guns.com.

Sig Sauer came correct with pricing for Army MHS contract

Posted on by Leave a comment

The Government Accountability Office on Friday released the detailed decision on a contract protest by Glock over the Army’s selection for the Modular Handgun System contract.

The 17-page decision chronicled the Army’s efforts between August 2015 and August 2016 when the field of nine proposals from five companies was reduced to an offering by Glock and another, ultimately winning bid, by Sig Sauer. The difference between the two bids was a staggering $100 million.

In the end, Sig quoted $169.5 million for up to 550,000 M17/18 handgun systems, or just $308 per pistol, which is a deal when you take into account the amount of spare parts, mags, cleaning kits, and cases that are included.

The M17 comes in a full size (with extended mag) variant and a more compact model, below, to replace both the M9 and M11

Glock on the other hand was a lot higher.

More in my column at Guns.com

End of the line for VEPR?

Posted on by Leave a comment

A classic Molot VEPR in .308 with the long 22-inch barrel and Counter Sniper Mil-Dot 4-16x44mm optic with illuminated reticle. Now more expensive than ever!

Back in January, I spoke at length with people over at Molot who were working hard on extending their exports of VEPR rifles and shotguns to the U.S. They were hopeful that the new Trump administration would be friendly to lifting some sanctions on Russian-based companies. Russian-made firearms were popular export items to the states until the conflict in the Ukraine and the resulting international backlash triggered a host of official embargos.

Per figures from the International Trade Commission, 204,788 firearms of all kinds were imported from Russia in 2013.

This figure plunged to just 9,556 in 2015 — mainly from Molot, the only large firearms maker not named in sanctions.

Well, it looks like that figure is going to be a lot lower in 2018…

Inside the CMP, and the word on M1s coming back from overseas and possible 1911s…

Posted on by Leave a comment

To see just what the non-profit has on the shelf, I visited the Civilian Marksmanship’s South operations in Anniston. Co-located near the Anniston Army Depot — which is actually in nearby Bynum — and stores much of the Army’s stockpile of guns and items not needed for current operations, the CMP has a series of warehouses dotting the rolling hills of the area.

Unfortunately, most of them are nearly empty.

While now-retired CMP boss Orest Michaels told me back in 2010 the organization had 125,000 M1 rifles on hand including complete rifles, stripped receivers, and welded drill rifles, the group is coy about just what the numbers are today after several years of brisk sales and surging interest in U.S. martial rifles.

As Jim Townsend, CMP’s business development officer, walked me through a tour of their largest warehouse, he swept his arms over a large expanse of empty floor space and said, “When I first started here, this whole side of the building was full of M1s.” Repurposed crates that once contained M1s returning from allies in Greece and Denmark now hold everything but.

Repurposed crates that once contained M1s returning from allies in Greece and Denmark now hold everything but.

Why keep the empty space?

Check out my column at Guns.com for the answer.

Some 86,000 surplus M1s could be coming to CMP from the PI

Posted on by Leave a comment

This is my favorite work of Rafael Desoto. The Garand is great

The Civilian Marksmanship Program advises the Army could soon hand over a large stock of historically significant M1 rifles.

A post on an M1 Garand collectors group on Friday mentioned a group of loaned rifles coming in from the Philippines was being processed by the U.S. Army for shipment back to the states. Mark Johnson, CMP’s chief operating officer, confirmed that a large group of rifles may indeed be headed home and wind up in the organization’s hands.

”There are 86,000 or so M1’s hopefully coming back to the Army,” said Johnson. “We hope to see them in the future.”

More in my column at Guns.com

Will Russian AKs and Korean war surplus M1s come ashore post-Trump?

Posted on by Leave a comment

could-trump-administration-raise-floodgates-on-gun-imports-3-768x510

Some are hopeful the new management in Washington will be able to lift barriers to overseas firearm imports erected over the years, though the going could be slow.

President Donald Trump on Friday said it was “very early” to tell if the United States should lift sanctions on Russia, but that he seeks a “great relationship” with Putin and Russia.

On the campaign trail, Trump’s platform on trade concentrated on American jobs while floating the possibility of a tariff on all imported goods to help ease the current trade deficit. However, the Republican’s position on gun rights promised to curtail federal gun bans and limits. The two concepts, when balanced against one another, leaves open the possibility of action on foreign-made guns currently off-limits to buyers in the U.S.

I talked to industry insiders on both sides of the pond, the ATF, and the International Trade Commission to get the scoop on if bans going back to the 1960s could be reshaped.

More in my column at Guns.com

Hanging out at SHOT Show

Posted on by Leave a comment

Whelp, back from the annual gathering of the gun tribes in Las Vegas. Saw some interesting things. Did some interesting things. I think the biggest stories, besides the new SIG M17, is was the Hudson H9 and the SilencerCo Maxim 9.

Prefaced by a quiet build up over the past few weeks via social media, the H9 melds a full-sized 9mm semi-auto to a striker-fired pistol with a crisp 1911 trigger that has a .115-inch travel. But the innovative handgun with its cyberpunk panache didn’t just hatch fully formed from an egg last month.

More here.

Then there is the Maxim. The pistol, a 9mm that accepts double-stack Glock 17 magazines, can be arranged in either a short or a long configuration– both of which are suppressed. The difference in length between the two options is about an inch, with the full-size configuration measuring 10.75-inches overall and the abbreviated one taping out at 9.54-inches, which is about an inch longer than a standard 1911. Weight varies between 37-39 ounces.

More in the video below and in this piece in my column over at Guns.com.

« Older Entries Recent Entries »