The FN 509 LS Edge– with the “LS” being for Long Slide– is a polymer-framed practical/tactical striker-fired 9mm that hit the market earlier this year. It’s the size of an M1911, packing a 5-inch barrel and a Hi-Power slide nose profile– but is considerably lighter than either.
I have taken a liking to 509s in recent months and recently just swapped out my EDC piece in favor of a Compact variant from the same family tree and I thought the Edge, after I ran 1,000~ rounds through it, had a lot of things to like about it and one big thing to kinda not like so much: the cost.
Double taps from 7 yards in rapid-fire on old casino castoffs were a snap, so the gun is on point, but costs a bit more than direct competitors, for instance, going about $500 higher than the HK VP9L OR.
More in my review at Guns.com.
There, I said it.
If you have been following me for the past few years, my primary for a long (long) time staple EDC was a 3rd Gen Glock G19 or a newer G19X with a well-used S&W Model 642 J-frame or FN 503 as a BUG. This, I switched up in 2019 after testing the S&W M & M&P M2.0 Compact, which was the same size/capacity as the G19 but felt so much better and more accurate to boot. The Smith chewed through 2,000 rounds with no issues and, as I was able to buy it cheap, was my go-to, especially when flying around the country.
Now, after three months of kicking the tires, I am putting the M&P back into the safe in favor of an FN 509 Compact.
Just slightly smaller than the G19 (or M&P Compact) it offers a 12-round chopped mag in the chopped down grip and a 15 if you want to go more full-sized. Not a huge difference, but still noticeable, and if you are good with running the 12 rounder, the FN 509 Compact is even more concealable. (Photo: Chris Eger/Guns.com)
After going northward of 1K rounds without a hiccup, I bought the gun from FN rather than sending it back and will be carrying it for keeps moving forward.
My reasons why? Check out my column at Guns.com.
Earlier this year, FN released the Model 509 LS Edge, with the “LS” referring to the extended 5-inch barrel and corresponding lengthened slide. Optics-ready for just about every micro red dot on the market, it has a lot going on.
Due to the lightening cuts in the slide and polymer frame, the FN 509 Edge LS is the same size as an M1911 but, loaded with 18 rounds of 147-grain 9mm and topped with a Leupold Delta Point Pro, it weighs just 36 ounces.
I’ve been kicking the tires on one for a minute. Check out my initial thoughts after the jump.
Announced earlier this year, the FN 509 Compact builds on the legacy – and growing popularity – of the platform that was originally designed in 2015 to compete in the Army’s Modular Handgun System program. While the Pentagon ultimately went with Sig, the extensive R&D led FN to release the 509 to the commercial market in standard, Tactical, MRD, Mid-Size, and LS Edge variants since then.
Overall length is just 6.8 inches with a 3.7-inch barrel. Shipping complete with low-profile iron sights, the FN 509 Compact tips the scales at 25.5 ounces. The size puts it a skosh smaller than the Glock 19 and, with the included 12-round flush fit and 15-round pinky extension mags, able to carry the same capacity of 9mm.
I’ve been checking one out for the past few weeks, and it is my current T&E carry gun.
If you think that grip texture is super aggressive and “sticks” to your hand, you are absolutely correct, my friend!
More on the FN 509 Compact in my column at Guns.com.
Stretching out their popular FN 509 platform, FN on Monday announced its new factory-tuned LS Edge pistol, designed to have many of the same features as a fully customized handgun direct from the factory.
Billed as the “ultimate tactical pistol” the 9mm FN 509 LS Edge has an optics-ready slide over a 5-inch hammer-forged target-crowned barrel. By comparison, the standard FN 509 Tactical series uses a 4.5-inch threaded barrel on a shorter slide with a shorter sight radius. Going past the added length, the 509 Edge LS also brings with it enhanced ergonomics and adaptability along with a flat-face, facet-edge trigger, and other features.
FN’s continuing on the optics cut as-standard trend that the rest of the firearms industry has been moving towards for years, and seems to be doing it nicely.
More in my column at Guns.com.