Tag Archives: new gun 2023

An Unlikely All-steel Micro 9

Posted on by Leave a comment

EAA, long known for its Regard, Witness, and Windicator models, two years ago began to import the Girsan MCP35 from Turkey. That later pistol seems to be modeled after the later post-1980 Browning Mark II/III models made by FN during the last few decades of the model’s run with that company. The latter includes an external extractor, a serrated ring hammer, a slim trigger, a windage drift-adjustable rear sight, ships with a Mec-Gar produced 15-shot aftermarket double-stack magazine and includes both an ambidextrous safety and a magazine-disconnect safety (more on this abomination later).

I really dug the standard-sized MCP35, seen here in a factory FDE option, finding it an excellent value and lots of fun on the range. (All photos: Chris Eger/Guns.com)

While EAA introduced updated OPS and Match series MCP35s, which upgraded the legacy standard with accessory rails, optics cuts, and a better trigger, what I openly wished for was a shortened version optimized for carry. Hi-Power fans will immediately recall the old FM Detective.

Made by FM in Argentina, which had been set up under license by FN back in the 1960s to make BHPs for the Argentine military and police, the Latin American armory developed a shortened model that retained the same size grip and magazine capacity. It was only brought into the States for a few years in the 1990s, when it was marketed as the Detective by importers.

I was a huge fan of the Detective and bought and carried the gun on the right for several years. It was rough and basic, but it worked. For those interested, according to the online inflation calculators, $239 in 1992 is worth $514.18 today, which is around what the MCP35 PI runs. Also, do not try to go to SOG and get the above deal, as that importer closed its doors years ago.

Taking a cue from the old FM Detective, EAA teased the new MCP35 PI late last year and started shipping it a couple of months ago.

The basic concept trims an inch off the barrel length and almost an inch and a half in overall length, as well as a few ounces in weight, from the standard MCP35, leaving a more compact pistol, roughly akin to the concept of a Commander 1911.

The big kicker is that, in that size, it is the same size as guns like the SIG P365 XMacro and Springfield Armory Hellcat Pro, while being hammer-fired and all-steel. 

The EAA Girsan MCP35 PI is a factory-shortened Hi-Power clone that still accepts standard magazines and most parts, save for slide and barrel components. 

My full review on the PI after the jump.

Everything old is new again, DW 1911 edition

Posted on by Leave a comment

If you have followed this blog for more than a week or so, you’d know that I have a soft spot for 1911s. Well, at Indy last week, it was obvious that Dan Wesson is keeping a foot in both the vintage and contemporary 1911 market.

The newest version of the DW Specialist debuted at the 152nd NRA Annual Meetings in Indianapolis over the weekend, adding an optics-ready slide to the .45 ACP rail gun. The factory cut has three optic plate options while a front fixed Novak-style fiber optic night sight and a tactical rear sight are also mounted.

Dan Wesson 1911 Specialist Optics-Ready includes a tactical hammer and a long solid trigger in addition to an ambi safety.

Note the Picatinny accessory rail, G10 VZ Operator II grips, and 25 LPI front strap checkering. The forged stainless steel frame and slide has a matte black duty finish.

Then there is the Heirloom.

The company’s Heirloom 1911 series are typically only offered in limited runs each year, usually just in .45 ACP. Now, for the first time, Dan Wesson is rolling with a .38 Super chambering for this top-shelf Government Issue-sized pistol. Made with premium parts while remaining eminently shootable, the pistol uses hand-fit 70 Series frames and slides paired with a match-grade barrel.

One of the big selling points is that these are rock-solid guns and that DW refuses to use any MIM small parts in the construction of an Heirloom. The idea is that it is built to withstand the test of time and is made to be handed down from one generation to the next– still as accurate and dependable as it was on day one.

Note the Black DLC high-polished finish, scrollwork, brass front sight, and Ivory-colored G10 grips.

The Heirloom ships with a solid medium-length trigger, undercut trigger guards, hand-polished flats, a beveled magazine well, and an overall carry bevel treatment.

I wouldn’t toss either one out of my safe. 

Peanut butter Hellcat travels

Posted on by Leave a comment

I wouldn’t classify myself as a Springfield Armory fanboy, but after spending a lot of time and brass with the Hellcat Pro, I may become one.

Springfield introduced the Hellcat 11+1 round 9mm series in September 2019, becoming one of the first real competitors to SIG’s P365, a 10+1 round micro compact 9mm of about the same size that hit the reset button on the carry market the year prior.

Then, in 2022, Springfield updated the design with the Hellcat Pro series, which brings a 15+1 capacity and an optics-ready slide to the platform.

I’ve been kicking around one with a peanut butter (officially Desert FDE) hued finish since around Thanksgiving and have well over 2K rounds through it.

The full details after the jump.

Ruger makes it official on the Marlin 336 Reboot

Posted on by Leave a comment

First introduced when Henry Truman was president, the 336 was a staple of Marlin’s catalog, most commonly chambered in .30-30 Winchester or .35 Remington. Sold through a variety of store brands in the 1970s such as the Glenfield Model 30, the simple lever gun was a go-to for sportsmen across generations.

The 336 is a classic as it is…

However, when the Marlin collapsed under the house of cards that was the old Remington Outdoors back in 2020, the 336 fell out of production for the first time in 72 years.

Then came Ruger, who purchased the brand and its assets as part of Remington’s Chapter 11 bankruptcy sale. After moving production from Remington’s shuttered plant in Huntsville, Alabama to a new line set up by Ruger in Mayodan, North Carolina, the Marlin Model 1895 in .45-70 returned to the market in December 2021.

Now, Ruger President and CEO Chris Killoy has kept his past promises to keep rolling out those Marlin favorites to the riflemaker’s huge fanbase.

“The legendary Model 336 helped to build Marlin Firearms into the iconic American brand that it is today,” said Killoy this week. “We have worked for many months on every detail to ensure that Ruger’s reintroduction of this iconic rifle lives up to its stellar reputation.”

I first ran across the new “Mar-ger” 336 in .30-30 at SHOT Show earlier this year some two months before it was “officially” released.

Chambered in .30-30 Win., the Model 336 Classic sports American black walnut furniture with checkering on both the stock and forend. The stock’s black pistol grip cap is inset with a Marlin Horse and Rider medallion and the forend is attached using a barrel band.

I had hoped the new 336 would be more affordable than the $1,479 Model 1895– after all, the “JM” marked 336 of old could be had in big box stores for $299 (with a Simmons scope included!) as recently as the 1990s.

Well, spoiler alert, it is $1,239.

Oof.

500 Rounds with the Newest FN 5.7

Posted on by Leave a comment

FN recently debuted the third generation of its 5.7x28mm caliber pistol, bringing the curious pistol from the 1990s kicking and screaming into a more modern period.

I’ve been testing for the past few months and have a 500-round review.

What the new MRD MK3 brings to the game is the ability to mount just about any micro red dot optic (hence “MRD”), something that was particularly hard to retrofit on previous models, as well as a lot of updates to the pistol’s ergonomics. All this in a hammer-fired delayed blowback action semi-auto with a semi-fixed barrel chambered for the spicy little 5.7 round.

A big bonus on the MRD MK3 is that it carries new stippling and textures on the frame as well as enhanced serrations on the slide, trigger guard, and safety selector that update the pistol’s ergonomics. Past classic and MK2 models have a much slicker surface texture. (Photo: Chris Eger/Guns.com)

How does it shoot? More in my column at Guns.com.

So what’s the deal with the Glock 47? (A: Interoperability)

Posted on by Leave a comment

Glock came to SHOT Show in Las Vegas last month with the new commercial variant of the G47, and I snagged one for a better look.

A pistol that debuted a few years ago but wasn’t available to the public, the G47 came as part of an $85 million/10-year contract with U.S. Customs and Border Protection in 2019. With more than 45,000 sworn law enforcement agents and officers, CBP’s mission includes security through the U.S. Border Patrol as well as customs and counter-smuggling operations at over 330 ports of entry. It is the largest federal LE agency inside the Department of Homeland Security.

The contract included not only the previously unknown G47, which by all accounts was created especially for the contract but also compact Glock 19 Gen 5 models and subcompact Glock 26 Gen 5s, all in 9mm. Keep that in mind moving forward.

The G47 isn’t a “game changer” but it does have a few little things that are interesting about it.

Such as this:

The G47, right, is seen above compared to the crossover G19X, which is the same height and roughly the same frame but with a G19-length slide and barrel. (Photo: Chris Eger)

And, showing off that modularity, I give you the “you got chocolate in my peanut butter” that is the G19X and G47 MOS with swapped uppers. Both guns shoot and cycle fine. You could do the same between the G47 and the G17 Gen 4/5, G45, and G19 Gen 4/5. (Photo: Chris Eger)

More in my column at Guns.com.

A look at the new .264 Round from FN and the Rifle that Uses it

Posted on by 2 comments

FN America brought some of the best new tech to SHOT Show last month, including a new weapon system developed for the “Irregular Warfare Technology Support Directorate.”

Built around a new 6.5x43mm Lightweight Intermediate Caliber Cartridge, or LICC (lick?), that the company says delivers 7.62 NATO performance in a 5.56-sized package, FN’s new Individual Weapon System was developed for the IWTSD, a government office that supports the U.S. special operations community. Originally formed in 1999 as the Combating Terrorism Technical Support Office, for those curious, the “IWTSD Identifies and develops capabilities for DOD and Interagency customers to conduct Irregular Warfare against all adversaries, including Great Power competitors and non-state actors.”

The 6.5x43mm was developed by the U.S. Army Marksmanship Unit in partnership with IWTSD and was originally dubbed the .264 USA back in 2014 while the LICC designation was in use by 2016. Awarded a contract in 2019 to further develop the concept and a weapon platform to use it, FN delivered prototyped 6.5x43mm Individual Weapon Systems to the government for testing last summer.

FN optimized the round for practical use and had examples on hand at SHOT Show, seen here with 103-grain bullets loaded. Would be interesting to do the math on that ballistic coefficient. (Photo: Chris Eger/Guns.com)

The IWS is a fully-ambi piston gun rather than using direct gas impingement like the M4 series. (Photo: FN)

More in my column at Guns.com.

Everything you want in a P365, without the loudener

Posted on by Leave a comment

SIG has an optimized variant of the 17+1 round 9mm P365 XMacro headed to the market– minus the integrated compensator that a lot of folks detest– but with a few extra goodies.

The new P365 Macro TACOPS will have the slightly taller grip module of the XMacro that comes standard with a frame-mounted M1913 accessory rail for lights and lasers. The upper half is that of a standard P365 XL. What is totally new on the micro 9 is an integrated magwell for faster reloads, an extended slide catch lever, and, as it is a TACOPS package, four flush-fit 17-round magazines.

I ran into the P365 Macro TACOPS at SIG’s media event in Nevada last week on the eve of SHOT Show and got a sneak peek at the new pistol.

The P365 Macro TACOPS can be looked at as a P365 XMacro in which someone swapped out a regular XL top half and added a magwell and extended slide lever. The pistol shown wears a SIG RomeoZero Elite 1×24 micro red dot– which fits the Shield RMSc/Holosun K footprint of the series– with its optional metal shield installed.

More in my column at Guns.com.

In one of the most surprising stories from SHOT…

Posted on by Leave a comment

Confession time: I have long owned and used an 8+1 shot Bersa Thunder CC .380, finding it both reliable and very easy to conceal. At the time I picked it up, I’d gone down a rabbit hole in which I owned several Argentinian-made pistols including a few HAFDASA Ballester–Molina .45ACPs and a couple of 9mm FM (not FN) Hi-Powers.

Not a bad little gun…

Founded by a trio of Italian immigrants to Argentina back in the 1950s, the company made a name for itself crafting small and dependable blowback-action pistols that evoked a sort of Walther PP/PPK flavor.

Long imported by Eagle Imports, Bersa switched gears in 2021 and elected to go with Talon moving forward while also looking to bring some production to the U.S. This led to a new state-of-the-art facility in Kennesaw, Georgia which has been slowly standing up for the past two years.

That’s what brought me to Bersa’s booth hidden over in the 70,000-block of Ceasar’s Forum during SHOT Show last week.

Did I mention they are making a half dozen different AR models now?

More in my column at Guns.com.

So Beretta *finally* made another SAO 92

Posted on by 3 comments

“Did you see the Single Action?” he asked in lieu of a greeting. The man posing the question was a friend of mine, long involved in the behind-the-scenes R&D and market research at Beretta and now with another similarly large and distinguished European gun maker in whose booth we were standing at SHOT Show in Las Vegas.

In fact, I had not seen the new Beretta 92 XI, or “9211” first-hand but I had heard of its existence from a fellow gun writer who had gone to the media day for the gun the day prior. It was a small community and news always traveled fast, especially in the digital age.

“So I take it you had a hand in that?” I asked.

“Oh yeah.”

“Why did it take so long to do that? Folks loved the Billennium,” I said, speaking of the limited run of SAO Beretta 92s released in 2001. These guns are often described as the best 92 ever made.

Heading over to Beretta shortly after speaking to my friend about everything his new company was working on, I encountered the 92XI and was impressed.

Using all the “X” series features that the company had previously introduced in the 92X Performance model– optics ready slide, slim Vertec frame, DLC coated trigger internals– the new 92XI runs a crisp single-action-only trigger with a flat bow and a manual frame-mounted safety lever, ideal for carrying “cocked and locked.”

More in my column at Guns.com.

« Older Entries