The big takeaway on this model is that it takes a well-liked gun that has been around for almost a decade and gives it a series of small updates, as well as an integrated single-port compensator.
The compact, semi-automatic, striker-fired P-10 C 9mm was first introduced in 2017 and has continued to evolve over the past decade. Featuring a 15+1 magazine capacity, its 4-inch cold hammer-forged barrel, in addition to its new compensator, now sports a heavier profile to help keep the gun flat. The sights have been brought over from the new Nocturne P-09 series. The optics footprint uses a plate system.
The P-10 C Ported has an overall length of 7.3 inches. Note the large port on the 4-inch heavy barrel, directed out the top of the slide, which creates a setback on the front sight. (All photos: Chris Eger/Guns.com)
The unloaded weight is 26.8 ounces.
The pistol is roughly the same size as the G19.
And compared to the company’s recently introduced P-09C Nocturne.
The short answer to this one is that the CZ P-10 C Ported is one of the most reliable pistols we have evaluated. Over the course of about 800 mixed rounds across several ammo types and loads, we did not have a single stoppage.
We didn’t even suffer from a slide failing to lock back on an empty mag. And that is on a gun right out of the box with no additional lube or prep.
The P-10 series has a reputation as one of the most durable and reliable pistols on the market. One of our favorite exports from Czechia. We feel Jan Zizka would approve.
The majority of what we fed the P-10 C was Remington 115-grain FMJ Range 1,145 fps bulk pack (500 rounds loose-packed inside a bag in a cardboard box).
Swapping it up, other loads included Federal’s red-tipped 150-grain Syntech Action Pistol flat-nosed rounds, CCI Blazer 115-grain FMJ, Winchester 124-grain NATO ball, and Federal’s 147-grain Gold Medal Action Pistol.
After chugging through about 700 rounds of range loads, we switched to self-defense rounds and found the P-10 C to run Speer 124-grain Gold Dot, Federal 124-grain Punch, and 135-grain Hydra Shok Deep JHPs without issue.
Besides enduring use with the Czech military and others, the German Army recently tapped CZ to provide as many as 186,000 P-10Cs to replace that country’s P8 (Heckler & Koch USP) series pistol.
Alabama-based Kimber looks to mine more gold from its popular new 2K11 double-stack series pistols by debuting five new, and more carry-oriented, Pro models.
The company debuted the 2K11 line in three models and two calibers (9mm and .45 ACP) last November with an aluminum alloy grip module over an SST steel sub-frame. The slide is made of stainless steel, featuring an external extractor, front and rear slide serrations, and a factory optics cut in the RMR footprint.
Running TAG Precision FiberLok 2 front sights with a suppressor-height serrated rear sight, under the hood is a beast of a deep-crowned, fluted bull barrel. Buyers also got a great GT aluminum trigger, ambi safety levers, an innovative tool-less guide rod/spring assembly, and common (2011 pattern) magazine compatibility.
The standard 2K11 is an elegant, if full-sized, tack driver that is slicker than an oyster with a head cold. (Photo: Chris Eger/Guns.com)
Since then, Kimber has added a Stainless model featuring the Carbon Fiber/Kevlar-infused grip module from MJD Solutions, the 2K11 Independence, and the Eclipse.
Now, the company has answered demand for a more compact entry to the 2K11 line in a big way with five new 9mm models, all sporting a 4.25-inch fluted and crowned barrel while offering 19+1 round Checkmate UHD magazines. Two of the new models will also be available in .45 ACP format, shipping with one flush 11+1 round mag and one extended 13+1.
All share many of the more top-shelf 2K11 features, such as its toolless guide rod, external extractor, disconnector ramp, and zero-creep GT Trigger that has a 3 to 4-pound break. All are optics-ready and ship with an RMR plate with RMSc, DPP, ACRO, and 509T available. As with the rest of the line, these guns are constructed, not assembled, by a single technician, from the ground up.
Let’s talk models.
These five finishes available are Coyote, Eclipse, Minotaur, Royal, and Stainless. Of these, the Coyote and Minotaur feature aluminum grip modules, while the other three use MJD carbon fiber and Kevlar molded grips, with the latter shaving off about 6 ounces in weight.
The Coyote. Note its Stan Chen magwell and Kevlar carbon fiber grips on an aluminum grip module. Hitting the scales at 40.9 ounces empty, it is available in 9mm ($2,699) and .45ACP ($2,799). Note the Coyote PVD slide and black DLC barrel
The Eclipse with its stainless slide and black DLC barrel. Offered only in 9mm, it is lighter at 35 ounces due to its MJD carbon fiber grip module. Price is $2,345.
The Minotaur features a distressed Sandstone Cerakote finish over its stainless slide and frame with a black DLC finished barrel. Available in 9mm, it has an ask of $2,575.
The aristocratic Royal has a bronze PVD finish and an MJD composite grip module and magwell. It is available in 9mm for $2,499 or .45ACP for $2,599.
Finally, the aptly named Stainless has a Kimpro Granite finish and Kevlar carbon fiber grips. In effect, it is the most attainable 2K11 Pro, priced at $2,245. It is only offered in 9mm.
We have one of these inbound for a review, so expect to see more on these beautiful – and functional – new pistols in the coming weeks.
Out of production for more than a quarter century, the moon-clipped S&W 940 snub-nosed wheel gun has been resurrected – and modernized.
The original 940 was a 9mm companion to the classic .357 Magnum Model 640, a hard-wearing stainless five-shot double-action-only J-frame Centennial series revolver with a snag-free concealed hammer. Using a moon clip to hold the rimless 9mm rounds, it was fast and easy to reload while opening the revolver to a wide range of easy-to-find ammo.
While the 940 was only produced between 1991 and 1998, huge advances in bullet and propellant design have made 9mm more popular than ever, meaning that in many cases, the variety of self-defense loads available at local retailers in the caliber is greater than any other. With that in mind, rebooting the 940 makes sense.
Further, the new model ships with an XS Tritium night sight in front, something the old model never had. Oh, yeah, and it has VZ black cherry grips and a fluted barrel.
The new S&W 940 in 9mm is a five-shot DAO snub-nose with a concealed hammer. Note the 2.17-inch 1:10 RH twist stainless-steel fluted barrel. Height is a pocketable 4.38 inches. Weight is 23.5 ounces.
CZ is marking the 80th anniversary of the end of World War II with a salute to the often unsung “Free Czechs” who served with the Allies with a special Spitfire-themed CZ 75.
Occupied by Germany on the eve of the conflict, just months before the shooting started, thousands of Czechs escaped to continue the fight against a common enemy.
Some 2,500 Czechs served in the British RAF during WWII, filling three fighter squadrons (No. 310, 312, and 313), one bomber squadron (No. 311), and one night fighter squadron (No. 68) as well as flying alongside British pilots in other squadrons. They also played a vital role in No. 138 Special Squadron, an outfit that dropped agents and supplies into occupied Europe– including Czechoslovakia.
A Czech Spitfire pilot of No. 313 Squadron in conversation with his rigger and fitter at Hornchurch, 8 April 1942. (Photo: Imperial War Museum)
These men, exiles far from home, chalked up over 28,000 fighter sorties (at least 16 Czech “aces” flew with the RAF), dropped 2.6 million pounds of bombs on enemy targets, and made a difference from the Battle of Britain to the beaches of Normandy and beyond. Nearly 500 were killed in action.
The CZ 75 RAF special edition emulates the famed Supermarine Spitfire fighter aircraft, which was flown by many of the Czech fighter pilots serving with the British during the war. (All photos unless noted: CZ)
The CZ 75 RAF includes lightening cuts in the slide that recall the exhaust stacks of the Spitfire’s Rolls-Royce Merlin engine, as well as a finish that includes “riveted” body panels.
The grips include a set of Czech aviator’s wings.
The serial number sequencing starts with one of the Czech RAF squadrons, in this case, No. 310 Fighter Squadron. Note the British “bullseye” roundel.
And it is repeated on the front of the slide.
The magazine base has a stylized RAF.
The RAF’s Latin motto, going back to 1918, “Per Ardua ad Astra,” which translates to “Through Adversity to the Stars,” is carried.
Note the Czech roundel, which is still carried on the country’s military aircraft.
The CZ 75 RAF is a thing of beauty.
Besides the pistol itself, its unique case recalls the avionics panel on the Spitfire, while its key is in the shape of the aircraft. Also included are an embroidered squadron badge patch and a hand-painted and signed Spitfire illustration by the well-known Czech painter and illustrator Jaroslav Velc.
Price? Availability? Just 56 CZ 75 RAF models will be created and will be offered…soon.
On a side note, as CZ now owns Colt, it would be neat to think that, at some point in the future, there may be a similar line of 1911s that salute famed American military units. Send those emails, folks!
Ruger and Magpul have teamed up to produce a new 9mm handgun complete with a modular stainless-steel chassis system, which could be a universal adapter.
Dubbed the RXM, the new pistol is striker-fired and familiar, having the same general dimensions as many popular carry guns of the past few decades.
Compared to popular carry guns such as the Glock 19, S&W M&P9 Compact M2.0, and CZ P09 Nocturne, the Ruger RXM seems very familiar.
Diving deeper, it has a serialized Fire Control Insert that is independent of its grip frame, which gives it the flexibility to be easily swapped into different grips – which are developed and produced by Magpul. Optics-ready with a Tritium front sight, it runs popular 15-round G19-pattern mags.
Can you say, “chassis system?”
American-made, the RXM has an MSRP of $499. For that, you get a G19 Gen 3 feeling pistol, made in the U.S. (not in Brazil or Turkey), with probably the most popular double-stack 9mm magazine pattern, complete with steel night sights and an optics cut. Plus, the removable chassis system, backed up with grip modules from Magpul, gives it some serious modularity.
Ruger has long had problems bringing a 9mm pistol to market that people really, really liked. RXM could see that change.
For the neat 30-year span between 1988, when the Glock 19 was introduced, and 2018 when the SIG P365 appeared, the 7.36-inch long, 4-inch barreled, 15+1 shot, 24-ounce unloaded G19 was the magic box of dimensions that every pistol maker chased.
Today, we have the new Springfield Armory Echelon 4.0C, which is 7.25 inches long with a 4-inch barrel, uses 15+1/18+1 magazines, and is 24 ounces, unloaded.
Unlike Glock, the Echelon has a chassis system that can be swapped around multiple grip modules of varying size and color and has a far better and more adaptable optics mounting system than Glock’s MOS plates.
Plus, it’s reliable, has ambi controls, a decent trigger, and much better sights.
The Echelon 4.0C could offer a good multi-purpose pistol for either home defense, especially with a good weapon-mounted light, or carry.
The SCAR-SC. I mean, will you just look at it? How is this thing not in 150 different movies? (Photo: Chris Eger/Guns.com)
The FN 15P debuted at last year’s SHOT Show as an NFA-compliant ode to the SCAR SC, which is on the no-no list due to the Hughes Amendment (which for the record should be repealed, thanks, Ronnie). The semi-auto 5.56 chambered large format pistol is the smallest SCAR in production, going even shorter, at under 20 inches long, than the 21-to-25-inch SCAR SC.
Now, the pistol-length FN 15P is available in .300 BLK, a caliber that is much more ballistically suited to a platform with a 7.5-inch barrel.
Being fully aware that Blackout shines in suppressed platforms, FN has updated the 15P in .300 to include gas regulator settings for subsonic and supersonic ammunition, a .30-caliber flash hider, and a dedicated 30-round magazine optimized for the stubby cartridge’s geometry. Plus, replacement barrel assemblies are on the menu for those who have the 5.56 variant and want to swap out to the BLK.
The FN SCAR 15P in .300 will be offered in both a tactical peanut butter (FDE) with black accents as well as good old-fashioned black on black.
