Tag Archives: nraam 2023

A Closer look at the FN 15 Guardian

Posted on by Leave a comment

For the past couple of months, I’ve been working with FN’s most entry-level AR-15, the Guardian.

It shares a lot of FN’s M4 DNA and has a great barrel– I’m talking a 16-inch nitride-coated specimen made of 4150 chrome-moly-vanadium (CMV) steel. FN tells us it is MIL-B-11595 high-pressure tested and subjected to magnetic particle inspection after proof firing. It runs a 1:7 twist rate, which is one of the most common twists on AR-15s today and great for stabilizing heavier bullets, which have become more popular.

Now, it uses a slick-sided NBS-made billet upper, which does away with the jam enhancer (forward assist), on a forged lower, and carries the same general furniture as seen on the company’s TAC3 series which costs twice as much. Everything else (trigger, charging handle, etc) is mil-spec.

At a $999 asking price – typically much lower with retailers – the FN 15 Guardian delivers a lot of performance for half the price of the company’s $1,889 TAC 3 and likewise comes in at a fraction of the cost of the $2,439 DMR3. In fact, the Guardian is the most affordable FN 15 in the company’s catalog, coming in at a price point lower than the $1,359 Patrol Carbine, its former “budget” offering.

I’ve only got a few hundred rounds through it thus far, but it is holding up well and I haven’t had a single jam even with mixing 14 wildly different loads across four different style mags.

500 Rounds with the Reflex (x2)

Posted on by Leave a comment

FN over the past few years has been trying to shrink down its 9mm carry offerings as an answer to market demands sparked by guns like the SIG P365 and Springfield Armory Hellcat. While the 6+1-shot FN 503 was small and dependable, people seem to have that double-stack micro 9 itch and, to scratch it, FN has debuted the Reflex.

With a 3.3-inch barrel that gives it a 6.2-inch overall length, the FN Reflex falls into the increasingly familiar micro 9 subcompact category blazed by some rivals in the past few years. (All Photos: Chris Eger/Guns.com)

Hitting the scales at just 18.4 ounces right out of the box, it runs a flush-fit 11+1 round mag with a pinky extension for better grip support and ships with an extended 15+1 round mag.

FN sent me a pair of the guns– one a plain black standard model, the second an optics-ready MRD in FDE– and I’ve put 500 rounds through each.

More in my column at Guns.com.

Hammer-Fired Micro 9: First Looks at the New FN Reflex

Posted on by Leave a comment

Setting itself apart from the rest of the itty bitty 9mm double-stack pack, FN’s new Reflex 9mm is a hammer-fired micro-compact with a great trigger.

Debuted just before the NRA’s Annual Meetings in April, I’ve been taking a closer look at the Reflex series as part of an extended test and evaluation that will push this little palm-sized parabellum past the 2,000-round mark.

The Reflex ships in a cardboard box with a plastic tray and comes with two magazines. For most states, this means a 15+1 round extended mag and a flush-fit 11+1 round mag with a pinky extension for better grip support. (All photos: Chris Eger)

The unloaded weight is 18.4 ounces with an empty mag. We found the Reflex in its most svelte form, with 12 rounds of Federal’s Punch JHP 124-grain self-defense loads and no optic, to hit the scales at 23.4 ounces. Shown with a DeSantis Inside Heat which, although made for the single stack FN 503, fits it like a glove.

More in my column at Guns.com.

Everything old is new again, DW 1911 edition

Posted on by Leave a comment

If you have followed this blog for more than a week or so, you’d know that I have a soft spot for 1911s. Well, at Indy last week, it was obvious that Dan Wesson is keeping a foot in both the vintage and contemporary 1911 market.

The newest version of the DW Specialist debuted at the 152nd NRA Annual Meetings in Indianapolis over the weekend, adding an optics-ready slide to the .45 ACP rail gun. The factory cut has three optic plate options while a front fixed Novak-style fiber optic night sight and a tactical rear sight are also mounted.

Dan Wesson 1911 Specialist Optics-Ready includes a tactical hammer and a long solid trigger in addition to an ambi safety.

Note the Picatinny accessory rail, G10 VZ Operator II grips, and 25 LPI front strap checkering. The forged stainless steel frame and slide has a matte black duty finish.

Then there is the Heirloom.

The company’s Heirloom 1911 series are typically only offered in limited runs each year, usually just in .45 ACP. Now, for the first time, Dan Wesson is rolling with a .38 Super chambering for this top-shelf Government Issue-sized pistol. Made with premium parts while remaining eminently shootable, the pistol uses hand-fit 70 Series frames and slides paired with a match-grade barrel.

One of the big selling points is that these are rock-solid guns and that DW refuses to use any MIM small parts in the construction of an Heirloom. The idea is that it is built to withstand the test of time and is made to be handed down from one generation to the next– still as accurate and dependable as it was on day one.

Note the Black DLC high-polished finish, scrollwork, brass front sight, and Ivory-colored G10 grips.

The Heirloom ships with a solid medium-length trigger, undercut trigger guards, hand-polished flats, a beveled magazine well, and an overall carry bevel treatment.

I wouldn’t toss either one out of my safe. 

Peanut butter Hellcat travels

Posted on by Leave a comment

I wouldn’t classify myself as a Springfield Armory fanboy, but after spending a lot of time and brass with the Hellcat Pro, I may become one.

Springfield introduced the Hellcat 11+1 round 9mm series in September 2019, becoming one of the first real competitors to SIG’s P365, a 10+1 round micro compact 9mm of about the same size that hit the reset button on the carry market the year prior.

Then, in 2022, Springfield updated the design with the Hellcat Pro series, which brings a 15+1 capacity and an optics-ready slide to the platform.

I’ve been kicking around one with a peanut butter (officially Desert FDE) hued finish since around Thanksgiving and have well over 2K rounds through it.

The full details after the jump.

Ruger does what it should have done in the first place

Posted on by One comment

When the Ruger Wrangler popped out in 2019, it was a basic no-frills .22 LR single-action revolver styled on their well-liked Single-Six but cheaper. 

Made with a zinc alloy frame and finished in Cerakote, it had basic fixed sights but it worked.

I handled the above early model at NRAAM four years ago and thought it was okay, but wished it had better sights, a longer barrel, and was sold with an option to swap out the .22 LR cylinder for a .22 Mag, which would make it a lot more capable. After all, Heritage makes their little single-actioned rimfires in Georgia with much the same convertible option, and for a bargain basement price.

Well, Ruger has heard me and legions of others and today, I can share that I have been evaluating the new Super Wrangler. As you may have figured out, it has better sights, a longer barrel, and is sold complete with a .22 LR cylinder and one for a .22 Mag.

Behold, the Super Wrangler! Notably, it comes in at half the price of Ruger’s Single-Six convertible.

More on the new Super Wrangler in my column at Guns.com.

Ruger makes it official on the Marlin 336 Reboot

Posted on by Leave a comment

First introduced when Henry Truman was president, the 336 was a staple of Marlin’s catalog, most commonly chambered in .30-30 Winchester or .35 Remington. Sold through a variety of store brands in the 1970s such as the Glenfield Model 30, the simple lever gun was a go-to for sportsmen across generations.

The 336 is a classic as it is…

However, when the Marlin collapsed under the house of cards that was the old Remington Outdoors back in 2020, the 336 fell out of production for the first time in 72 years.

Then came Ruger, who purchased the brand and its assets as part of Remington’s Chapter 11 bankruptcy sale. After moving production from Remington’s shuttered plant in Huntsville, Alabama to a new line set up by Ruger in Mayodan, North Carolina, the Marlin Model 1895 in .45-70 returned to the market in December 2021.

Now, Ruger President and CEO Chris Killoy has kept his past promises to keep rolling out those Marlin favorites to the riflemaker’s huge fanbase.

“The legendary Model 336 helped to build Marlin Firearms into the iconic American brand that it is today,” said Killoy this week. “We have worked for many months on every detail to ensure that Ruger’s reintroduction of this iconic rifle lives up to its stellar reputation.”

I first ran across the new “Mar-ger” 336 in .30-30 at SHOT Show earlier this year some two months before it was “officially” released.

Chambered in .30-30 Win., the Model 336 Classic sports American black walnut furniture with checkering on both the stock and forend. The stock’s black pistol grip cap is inset with a Marlin Horse and Rider medallion and the forend is attached using a barrel band.

I had hoped the new 336 would be more affordable than the $1,479 Model 1895– after all, the “JM” marked 336 of old could be had in big box stores for $299 (with a Simmons scope included!) as recently as the 1990s.

Well, spoiler alert, it is $1,239.

Oof.