Tag Archives: shot show 2023

A look at the new .264 Round from FN and the Rifle that Uses it

Posted on by 2 comments

FN America brought some of the best new tech to SHOT Show last month, including a new weapon system developed for the “Irregular Warfare Technology Support Directorate.”

Built around a new 6.5x43mm Lightweight Intermediate Caliber Cartridge, or LICC (lick?), that the company says delivers 7.62 NATO performance in a 5.56-sized package, FN’s new Individual Weapon System was developed for the IWTSD, a government office that supports the U.S. special operations community. Originally formed in 1999 as the Combating Terrorism Technical Support Office, for those curious, the “IWTSD Identifies and develops capabilities for DOD and Interagency customers to conduct Irregular Warfare against all adversaries, including Great Power competitors and non-state actors.”

The 6.5x43mm was developed by the U.S. Army Marksmanship Unit in partnership with IWTSD and was originally dubbed the .264 USA back in 2014 while the LICC designation was in use by 2016. Awarded a contract in 2019 to further develop the concept and a weapon platform to use it, FN delivered prototyped 6.5x43mm Individual Weapon Systems to the government for testing last summer.

FN optimized the round for practical use and had examples on hand at SHOT Show, seen here with 103-grain bullets loaded. Would be interesting to do the math on that ballistic coefficient. (Photo: Chris Eger/Guns.com)

The IWS is a fully-ambi piston gun rather than using direct gas impingement like the M4 series. (Photo: FN)

More in my column at Guns.com.

As Close as it gets to an ‘Affordable’ Modular Carbine

Posted on by One comment

Modular 5.56 rifles are the way of the future. However, they are expensive by any measure. Just look at the Beretta ARX160, the FN SCAR, and the CZ Bren M2– the cheapest of which hit the low $2K mark and go far north from there.

Take for example the new SIG Sauer MCX Spear in 6.5 Creedmoor. While I dearly love SIG– my West German P226 has been shot out twice over the three two decades, each requiring a new breechblock and spring rebuild; while my daily carry pistol for most of the past six months has been a P365 XMac– they are very proud of their guns.

There is a lot to be proud of with the MCX Spear in 6.5 Creedmoor.

A kind of stepped-up version of the new MCX Spear LT, which was announced last year in 5.56 NATO, 7.62x39mm, and .300 Blackout, the new variants will be in .277 Fury, .308 Win, and 6.5, with the latter being the most interesting in my opinion.

The new rifles share the same broad strokes of the Spear LT, including AR trigger compatibility, a push-button folding stock, fully ambi controls, dual charging handles (left side non-reciprocating and rear AR-style), SIG’s SLX suppressor quick detach muzzle device, a full-length top rail, and the ability to swap bolt/barrels for caliber exchanges.

Couple that with a 6.5CM and you run a laser-accurate round capable of effective hits to 800 yards with little hold over

Of course, SIG says the gun will cost $4K, sans optics.

Enter the Israeli IWI Carmel, which is now in production in the U.S. as the prospect of importing it adds a lot of flies and 922R problems to the mix.

Complete with a folding stock, fully ambidextrous controls, and a rock-solid reliable short-stroke gas piston that keeps everything cleaner (and doesn’t use the gas ring systems of the SCAR), the soft-shooting Carmel will hit the $1,600-$1,800 range and be available later this year.

Also, it uses AR-15 mags. Boom.

Everything you want in a P365, without the loudener

Posted on by Leave a comment

SIG has an optimized variant of the 17+1 round 9mm P365 XMacro headed to the market– minus the integrated compensator that a lot of folks detest– but with a few extra goodies.

The new P365 Macro TACOPS will have the slightly taller grip module of the XMacro that comes standard with a frame-mounted M1913 accessory rail for lights and lasers. The upper half is that of a standard P365 XL. What is totally new on the micro 9 is an integrated magwell for faster reloads, an extended slide catch lever, and, as it is a TACOPS package, four flush-fit 17-round magazines.

I ran into the P365 Macro TACOPS at SIG’s media event in Nevada last week on the eve of SHOT Show and got a sneak peek at the new pistol.

The P365 Macro TACOPS can be looked at as a P365 XMacro in which someone swapped out a regular XL top half and added a magwell and extended slide lever. The pistol shown wears a SIG RomeoZero Elite 1×24 micro red dot– which fits the Shield RMSc/Holosun K footprint of the series– with its optional metal shield installed.

More in my column at Guns.com.

In one of the most surprising stories from SHOT…

Posted on by Leave a comment

Confession time: I have long owned and used an 8+1 shot Bersa Thunder CC .380, finding it both reliable and very easy to conceal. At the time I picked it up, I’d gone down a rabbit hole in which I owned several Argentinian-made pistols including a few HAFDASA Ballester–Molina .45ACPs and a couple of 9mm FM (not FN) Hi-Powers.

Not a bad little gun…

Founded by a trio of Italian immigrants to Argentina back in the 1950s, the company made a name for itself crafting small and dependable blowback-action pistols that evoked a sort of Walther PP/PPK flavor.

Long imported by Eagle Imports, Bersa switched gears in 2021 and elected to go with Talon moving forward while also looking to bring some production to the U.S. This led to a new state-of-the-art facility in Kennesaw, Georgia which has been slowly standing up for the past two years.

That’s what brought me to Bersa’s booth hidden over in the 70,000-block of Ceasar’s Forum during SHOT Show last week.

Did I mention they are making a half dozen different AR models now?

More in my column at Guns.com.

So Beretta *finally* made another SAO 92

Posted on by 3 comments

“Did you see the Single Action?” he asked in lieu of a greeting. The man posing the question was a friend of mine, long involved in the behind-the-scenes R&D and market research at Beretta and now with another similarly large and distinguished European gun maker in whose booth we were standing at SHOT Show in Las Vegas.

In fact, I had not seen the new Beretta 92 XI, or “9211” first-hand but I had heard of its existence from a fellow gun writer who had gone to the media day for the gun the day prior. It was a small community and news always traveled fast, especially in the digital age.

“So I take it you had a hand in that?” I asked.

“Oh yeah.”

“Why did it take so long to do that? Folks loved the Billennium,” I said, speaking of the limited run of SAO Beretta 92s released in 2001. These guns are often described as the best 92 ever made.

Heading over to Beretta shortly after speaking to my friend about everything his new company was working on, I encountered the 92XI and was impressed.

Using all the “X” series features that the company had previously introduced in the 92X Performance model– optics ready slide, slim Vertec frame, DLC coated trigger internals– the new 92XI runs a crisp single-action-only trigger with a flat bow and a manual frame-mounted safety lever, ideal for carrying “cocked and locked.”

More in my column at Guns.com.

The two Coolest things at SHOT Show

Posted on by Leave a comment

You know, if you told me 10 years ago that the two coolest items across the 13.9 miles of aisles and 2,500 companies exhibiting at the 45th annual SHOT Show in Las Vegas would both be at the Palmetto State Armory booth, I would not have believed you.

However, it happened.

The company has brought back two icons: H&R M16A1s and a centerfire U.S.-made Sturmgewehr 44.

The H&R brand comes as a reboot of the old circa 1871 firearms company that PSA picked up for pocket change in Remington’s 2020 bankruptcy sale. Turning the refreshed brand over to NoDakSpud founder Mike Wettleland, they will be making classic M16A1 as well as Colt 723 and 635 models. The former were made by H&R as a Colt subcontractor in 1968-71.

The H&R M16A1 retro rifle is hand-crafted from proprietary forging dies with 1960s vintage government markings. As the guns made for the Army back in the Fortunate Son era were in the 2-million range, the new H&R will mimic that although will be distinctive in the fact that they have West Columbia, South Carolina rollmarks rather than the Worchester, Massachusetts marks of the original. (Photo: Chris Eger/Guns.com)

This brings us to Hill & Mac Gunworks of Alpharetta, Georgia, a small gunmaker that had been working on an updated semi-auto Sturmgewehr clone made with modern techniques complete with a threaded barrel, a long stroke piston operating tilting bolt action, an HK style trigger pack, wooden furniture, and the possibility of being chambered in 5.56 NATO, 7.62x39mm, .300 AAC Blackout, or the original 7.92 Kurz– the latter is still in production by Privi Partisan in Europe.

Well, while HMG did sell some generationally similar CETME-L builds a few years back and marketed some reactive steel targets, their Sturmgewehr never made it to serial production and by 2020 the project largely fell off the radar after the company went radio silent.

Until now.

Popping up at Palmetto State Armory’s booth at SHOT Show last week was Mac Steil, the “M” of HMG, with news that PSA had stepped in to bring the project across the finish line. Advancing to the production stage, HMG customers that had preordered it from them back in the day will still get their HMG-marked gun while new guns for PSA will be under that company’s new “Battlefield” series.

The StG will still be offered in all four HMG calibers, use a STANAG mag pattern, and still runs an HK trigger pack. Caliber can be swapped by the user via a mag, barrel, and bolt change. There will also be things such as BFAs for reenactors, folding stock models, and more planned for the future.

Oh, that Cheetah roar

Posted on by Leave a comment

Probably one of the most underrated of .380ACPs, the old-school Beretta 84/85 Cheetah, with its subcompact alloy frame and its 13+1 capacity, was a rock-solid classic back in the 1990s and early 2000s.

I have a couple of different .32 and .380 Beretta Cheetahs, all recently imported former Italian police guns, and I really like them.

Well, Beretta has brought it back in a very modern second generation, the 80X.

As its name would imply, borrows the Vertec grip, X-treme S Double/Single trigger, and skeletonized hammer as seen on the 92X line, but shrinks everything down a bit while keeping a 13+1 round capacity.

Direct blowback action, it runs a 3.9-inch barrel giving it an overall length of a very handy 4.9 inches. Weight is 25 ounces unloaded. Either way, nice to see folks are still making hammer-fired metal-framed guns for mainstream carry use. 

More in my column at Guns.com.

That 5.7, tho

Posted on by Leave a comment

So, the FN 5.7x28mm PDW round, which is pushing 30 years young, almost died out by about 2018, with only one small maker (California’s Excel) making pistols outside of FN.

Then the Ruger 57 pistol (and companion carbine), Diamondback DBX, CMMG Banshee MK57, PSA Rock, and Masterpiece MPA57 hit the market just in the past three years, joined by the third generation of FN’s own pistol. Added to this, AAC (PSA’s brand) along with Federal and Speer have started loading ammo for it, while Fiocchi is expanded its own offerings, adding to the availability and likely dropping the price in the coming days.

Well, now, Smith & Wesson has entered the fray with a $699 pistol gas-operated hammer-fired pistol that feels better than just about any of the above.

The 22+1 capacity (not a misprint) M&P 5.7.

I handled it at SHOT Show, and the handgun has a light and crisp feel to it with the felt recoil akin to a .22 Magnum.

More in my column at Guns.com.

FN Breaks Ground on new 10mm, 45ACP Striker Fired Pistols

Posted on by Leave a comment

Stretching the FN 509 Tactical series from its standard 9mm format to something bigger bore, FN is now offering red-dot and suppressor-ready 10mm Auto and .45 ACP models.

With a commanding 22+1 magazine capacity, the FN 510 in 10mm and its companion 18+1 shot FN 545 in .45 ACP still have all the standard features of the FN 509 Tactical. These include the company’s bomb-proof Low-Profile Optics Mounting System that fits just about any micro red-dot footprint on the market, fully ambidextrous controls, suppressor-height three-dot night sights with tritium inserts, and a 4.71-inch extended threaded barrel that accepts most comps and suppressors.

Looks like I am going to have to be spending some time on the range in the next few months!

More in my column at Guns.com.

A Pound of Prevention

Posted on by Leave a comment

On Monday, Taurus made the announcement they had a new, smaller version of the well-liked TX22 rimfire semi-auto pistol ready for the market.

The 16-ounce palm-sized TX22 Compact follows in the footsteps of the standard and competition models of the pistol with a flush-fitting 13+1 round magazine (10 rounds in restricted states) as well as an optic-ready cut that is compatible with the slimline Holosun K footprint. The sights are the same standard Glock pattern as used on the Taurus G3 and GX4 series.

At roughly the size of a Ruger LCP and with a 13+1 capacity of 22LR and zero recoil, the TX22 Compact could make a good “boat” or camp plinker and, paired with a good load such as Federal’s Punch rimfire, some will undoubtedly use it for personal protection.

I got a sneak peek of the TX22 Compact late last year while visiting Taurus’s new facility in Bainbridge, Georgia, and was impressed with it.

A well-tested prototype gun is seen here. Taurus did a ton of R&D here in the States on the gun and, in my hands, was a reliable plinker and flat shooter. (Photo: Chris Eger/Guns.com)

Looking forward to getting one of these in for testing, for sure.

« Older Entries Recent Entries »