Tag Archives: firearms news

Defense Bill Includes Selling Milsurp Shotguns Through CMP

230214-N-NH267-1484 INDIAN OCEAN (Feb. 14, 2023) U.S. Navy Fire Controlman (Aegis) 2nd Class Cody McDonald, from Spring Creek, Nev., fires an M500 shotgun during a visit, board, search, and seizure (VBSS) gun shoot on the flight deck of the Arleigh Burke-class guided-missile destroyer USS Paul Hamilton (DDG 60). (U.S. Navy photo by Mass Communication Specialist 2nd Class Elliot Schaudt)

The military could soon begin passing on surplus pump-action shotguns to the public via the Civilian Marksmanship Program.

Both the House and Senate versions of the National Defense Authorization Act defense policy spending bill for 2026, under Section 1062, call for the Army, Navy, and Air Force to transfer such scatterguns to the CMP.

The one-time transfer would cover guns that are “surplus to the requirements” of the respective service– including being surplus to military history and museum use. Further, they can’t be a shotgun that “is a modern ancillary addition to a service rifle” such as a “Masterkey” style gun that fits under an M16/M4. Also, guns that legally meet the definition of a “short-barreled shotgun” are barred from transfer.

The services would have to report to Congress, at least 60 days beforehand, the number of shotguns, including the make and model, that meet the surplus requirements and the number of which they intend to transfer to CMP.

Furthermore, the NDAA will modify the sale authority under U.S. law to permit the sale of surplus pump-action shotguns. Currently, the federally chartered non-profit, which is dedicated to promoting marksmanship nationwide, can only legally sell surplus rifles such as M1 Garands, M1903 Springfields, M1917 Enfields, M1 Carbines, and .22 trainers, as well as surplus M1911/1911A1 .45 pistols.

The U.S. military has been using pump-action breechloading shotguns for over 130 years, including the Winchester 1893, 1897, and M1912 Riot and “Trench” guns; as well as the Remington Models 10, 12, 31, and 870; the Stevens 520 and 620; the Ithaca 37, and the Mossberg 500/590– the latter of which are still under active contract.

“American M1897 Winchester Trench Shotgun, 12 gauge; American M1917 Enfield rifle; and M1903 Springfield rifle. General Headquarters, AEF Ordnance Department. Chaumont, Haute Marne, France, 4 January 1919.” Signal Corps photo 111-SC-154935. National Archives Identifier 313154926

Shotgun-armed Navy sentry on guard in port, August 1943. Navy Photograph. Courtesy of the Library of Congress PR-06-CN-215-5

Dec. 1942 Production. B-17 heavy bomber Army sentry Boeing's Seattle plant Winchester 12 shotgun riot gun

Dec. 1942 Production B-17 heavy bomber, Army sentry, Boeing’s Seattle plant, Winchester 12 shotgun, riot gun

“PFC. Art Burgess, a candidate in the Ranger Indoctrination Program (RIP), 2nd Battalion, 75th Infantry (Ranger), fires a Winchester-built Model 12 combat shotgun during special weapons training at Range 31, 13 January 1982.” The gun has been modified with a heat shield over the barrel, a bayonet lug/sling swivel, an over-folding buttstock, and a pistol grip. DA-SN-83-09168 Via NARA

As to how many of the above are still on hand in armories, depots, and arsenals– and are considered surplus– is anybody’s guess. Still, U.S. martial shotguns of any type are extremely collectible, leading them to be often faked (always be careful on a “good deal” M97 Trench Gun), so the prospect of a vetted quantity of these veteran guns headed to market is exciting.

The Republican-backed bill would still need to make it to President Trump’s desk and earn his signature, which is likely.

Now, if we can just get Congress to transfer all of those millions of old M16s that are in storage to the CMP, even if it is just the uppers, we’d really be cooking.

Could you imagine…(Don’t get too excited, these are over at Bowman Arms, or will be in early 2026)

Those Lost to the Gun Community in 2025

From international competitors and actors who made six-guns forever iconic to pioneering inventors and household names in the firearms industry, here is a look at those lost to us in 2025.

Lubos Adamec– Czech sport shooter who competed at the Summer Olympics in 1988 and 1992 in mixed skeet. He won three silver and a bronze medal at the European Individual Championships, as well as eight medals in team competitions at the World  Championships. He died in September, aged 66.

Joe Don Baker– Iconic Texas-born actor and Army veteran who appeared in at least three different Bond films, “Guns of the Magnificent Seven,” “Walking Tall,” “Mars Attacks!” “Cape Fear,” and others. He passed in May at the age of 89.

Frank R. Brownell III– The only son of Brownells founder Bob and his wife Lois, Frank grew up in Iowa and became involved in both the family business and the American gun industry at an early age, spending six decades with the company, with breaks to serve in the Navy and attend the University of Iowa. He passed in June, just shy of his 86th birthday.

Lino Cerati – The Italian sports shooter known for competing in the 1976 Summer Olympics, died in November, aged 87.

Wiley Clapp – A Virginia Military Institute alum (Class of 57) and Marine officer who saw heavy combat in Vietnam, Clapp went on to spend a career in law enforcement before he started writing for Gun World in 1986. Since then, he penned hundreds of articles in numerous firearms publications as well as at least two books. Ruger produced the special edition Wiley Clapp GP100 revolver with his input, while Colt’s introduced the Wiley Clapp CCO (Concealed Carry Officers) 1911-style pistol. He passed in June at home, aged 90.

Jimmy Cliff – Jamaican reggae and ska legend known for his amazing cover of Guns of Brixton and, notably, for on-screen S&W wielding in the 1986 Robin Williams comedy “Club Paradise.” He died in November at the age of 81.

Trevan Clough – Represented Papua New Guinea in trap at the 1976 and 1984 Summer Olympics. He passed at 82.

Gunther Danne – German sports shooter who represented West Germany in the 1972 Summer Olympics. He passed in October, aged 82.

Philip H. Dater – The New York-born Dater, a radiologist and Vietnam-era U.S. Air Force veteran known as a founding figure in modern firearm suppressor innovation, started designing suppressors in the 1950s, later “dabbling off-hours in his hospital’s machine shop” before going on to found first the Automatic Weapons Company (AWC) and later Gemini Technologies, today’s Gemtech. A true mentor and pioneer in the field of suppressor development, Dr. Dater died in January, aged 87.

Earl Herring – Maryland-born sports shooter who competed on the U.S. team in the skeet event at the 1968 Summer Olympics. He passed in June, aged 93.

John Brewster “JB” Hodgdon — Well-known member of the firearms community and lifelong resident of Kansas, JB was a staple of the Hodgdon Powder Company for five decades and passed in June at the age of 88.

Val Kilmer – The California-born actor was famous to gun nerds everywhere for his roles as Doc Holliday in “Tombstone” and Chris Shiherlis in “Heat,” among dozens of other iconic appearances. He passed in April, aged 65, but his films will live forever.

John Kopec – Noted firearms historian and author who penned several top-shelf books and collector’s magazine articles on 19th-century martial Colt single-actions. He passed in February, aged 97.

William Theodore “Ted” Kotcheff – Canadian-Bulgarian director and producer who brought the movie “First Blood” (1982), the first in the Rambo series, to life. He also directed “Wake in Fright” (1971), “Uncommon Valor” (1983), and “The Shooter” (1995). He passed in April, aged 94.

Andreas Kronthaler – Austrian sports shooter who competed at the 1984 Summer Olympics. Kronthaler died in March 2025, at the age of 73.

Robert “Bob” Nosler – A Vietnam-era Navy veteran, Nosler joined the family business as its sixth employee and spent four decades leading the now legendary Oregon-based manufacturer of bullets, cartridge cases, ammunition, firearms, and suppressors. The Chairman of the company that bears his family name passed in September, at the age of 79.

Sam Paredes – A formidable defender of the Constitution and 2A legend, Paredes dedicated 40 years of his life to Gun Owners of California– the oldest pro-gun political action committee in the country– and was a longtime board member of Gun Owners of America and the Gun Owners Foundation. He passed in August, aged 68, and was a friend and mentor to many in the fight for gun rights in the country.

Yevgeni Petrov – Perhaps the best known Russian skeet shooter, having earned a Gold in the 1968 Summer Olympics and a Silver in the 1972 games, passed in Moscow in November at the age of 87. He was a six-time world champion and coached the Russian clay team at the 1992 Olympics.

Athos Pisoni – Brazilian sports shooter who won gold in skeet in the 1975 Pan Am Games and represented his country at the 1976 Summer Olympics. He passed in February, aged 87.

Olegario Vázquez Rana – Renowned Spanish-born Mexican competitive shooter who competed in every Olympics from 1964 to 1976 and world championships from 1966 to 1979, setting numerous world records. Among other offices, he served as President of the International Shooting Sport Federation (ISSF) for over 30 years. He died in March, aged 89.

Hans Kjeld Rasmussen – Danish sport shooter and Olympic champion who won the gold in skeet at the 1980 Summer Olympics in Moscow. Rasmussen died in February, aged 70.

Phil Robertson – The professional waterfowler, inventor, and outspoken “Duck Commander” founder passed away in May, aged 79.

Michael Sabbeth – The Denver-based lawyer and lecturer wrote several books as well as numerous articles on hunting and shooting, with his work appearing in “Safari Magazine,” “The Double Gun Journal,” “Sporting Classics,” and “Claying Shooting USA,” among others. His blog, “The Honorable Hunter,” endures. He passed in November, aged 78.

Alan Simpson – The Wyoming politician and longtime Senate Republican Whip and Army veteran also served on the Buffalo Bill Center of the West’s Board of Trustees for over 50 years and was instrumental in bringing the Winchester Collection to Cody and helping build the Center into the “Smithsonian of the West.” He passed in March, aged 93.

John Taffin – Authored five books and over 500 published articles in the pages of “Guns,” “Gun Digest,” “Sixgunner,” “Shoot!” and “American Handgunner,” going back to 1967, while he clocked in on his day job as a math teacher. The legend, when it came to six-guns and cowboy action shooting, passed in March, aged 85.

Martin Tuason – The President and CEO of Armscor and Rock Island Armory, Tuason passed in November, aged 51, after leading the companies since 2012. Besides expanding the company’s footprint around the globe, he will also be remembered as the “T” in the innovative .22 TCM cartridge.

Ed Williams – After service in the U.S. Navy, Williams spent a career as a speech teacher at LA City College before moving into being a character actor and comedian in the 1980s, starring in “Police Squad!” and the “Naked Gun” franchise, among others. He died in October at the age of 98.

Going past these esteemed members of the firearms community at large, we also note the closing of a number of gun companies, including Anderson Manufacturing, DelTon, Kalashnikov USA, Pioneer Arms, and SCCY.

And so, we remember.

HK416A8 in Der Haus: German Army Issues First Heckler & Koch G95 Rifles

The German Bundeswehr recently issued the first of at least 122,000 dirty mustard-toned HK416A8 rifles to army infantrymen– and more guns are on the way.

Heckler & Koch has had a lock on German infantry rifles going back to the 7.62 NATO Gewehr 3 (G3), which was adopted in 1959 and is still in limited service. The newly adopted System Sturmgewehr G95A1 in 5.56 NATO is replacing the futuristic-looking G36 in the same caliber, which in turn has been supplementing the G3 since 1996.

HK416A8, Germany’s new standard issue rifle, type classified as the G95. (Photo: Bundeswehr)

The first of the new rifles was issued at Grafe to troops of Panzergrenadier Battalion 122 (PzGrenBtl 122), a “tip of the spear” unit garrisoned in Oberviechtach, Bavaria, on the Czech border (cue the comic rimshot).

In Grafenwöhr, the Deputy Inspector of the Army, Lieutenant General Heico Hübner (left), together with Vice Admiral Carsten Stawitzki from the Ministry of Defense, presented the first new G95 rifles to the troops. (Photo: Bundeswehr)

It appears that all of the issued rifles recently shown off are the shorter G95KA1 variant, with the “K” being “kurz” or short, as it has a 14-inch barrel. (Photo: Bundeswehr) (Official caption: In Grafenwöhr wurde das neue Sturmgewehr der Bundeswehr, das G95 A1, an das Panzergrenadierbataillon 122 aus Oberviechtach feierlich übergeben am 4. Dezember 2025.)

The G95, adopted in 2021, will be fielded in both the standard 16-inch G95A1 and shorter G95KA1, both of which are lighter and shorter than the G36 they are replacing. The Elcan Specter DR 1-4x is the companion day optic of record. (Photo: Bundeswehr) (Official caption: In Grafenwöhr wurde das neue Sturmgewehr der Bundeswehr, das G95 A1 an das Panzergrenadierbatallion 122 aus Oberviechtach feierlich übergeben am 4. Dezember 2025.)

The G95, as with the HK416 in general, uses a robust, AR-18 style short-stroke gas piston system rather than the more traditional AR-15 direct gas impingement. (Photos: Bundeswehr)

It uses STANAG 4694 rails with M-LOK accessory slots and has an adjustable gas block. Note the full-length top Pic rail

Unlike the G36, the G95, in all Bundeswehr variants, will no longer be black, but greenish-brown, a colorway that has been described by some as “ekelhaftgelb” (disgusting yellow). The reason: black has a higher infrared signature and is therefore easier to detect. (Photo: Bundeswehr)

Das Senfgewehr! (Photo: Bundeswehr)

The Budget Committee of the Bundestag, Germany’s parliament, last week approved the purchase of more G95 series rifles, complete with optics and lights. The country, with an ever-more aggressive Russia to the East, is looking to up its military spending and is even flirting with the prospect of returning to peacetime conscription.

First selected by the Bundeswehr in 2014 in its A5 variant for use as the G28 designated marksman rifle, the country also fields the HK416A7 as the standard G95 (no A1), which has been in use with Germany’s special operations units since at least 2018.

The above shows a German KSK commando with a “50 Shades of FDE” HK416A7/G95 outfitted with an EoTech XPS HWS system and magnifier. (Photo: Bundeswehr)

The German-based Dexheimer channel earlier this year went on a visit to HK’s factory in Oberndorf to get the tour and a deep dive background on the G95. Even if you don’t speak German, you can auto-dub it in English, although you don’t really need to.

Mossberg Lands $11 Million Army Contract for M590A1 Shotguns

The military’s nearly 40-year love affair with the Mossberg 590 pump-action 12 gauge has no end in sight.

The oldest family-owned firearms manufacturer in America announced last week that the Army has awarded it a contract valued at approximately $11.6 million for additional Mossberg 590A1 shotguns. It is unclear if the award is an extension of the $19 million maximum value contract for 17-inch M590s issued in September, but either way, the Army is getting a lot more 12-gauge Mossys.

The M590 is based on the company’s legendary M500 platform, but features a heavy-walled barrel, metal trigger guard and safety, a clean-out magazine tube, and a thick Parkerized or Marinecote finish. Numerous stock, forend, and barrel length options exist, as well as the always popular heat shield and bayonet lug.

A Mossberg 590M on display at the U.S. Army’s National Infantry Museum located at Fort Benning, Georgia. (Photo: Chris Eger/Guns.com)

The M590 series famously withstood the military’s grueling MIL-SPEC 3443E testing protocol for riot-type shotguns, which included running 3,000 shells with two or fewer malfunctions. As TFBTV’s James Reeves has extensively documented with his 500-round shotgun burndown series, that’s a heck of a standard, and few scattergatts can meet it.

A well-used 30-year-old Mossberg 590M that survived Hurricane Katrina and is still kicking. This thing can’t be killed. (Photo: Chris Eger/Guns.com)

The Army has used shotguns since before World War I. As noted by Canfield, the first Army contract for the M500 series was issued in 1979 for guns with oiled wood furniture, a standard which soon shifted to synthetic stocks.

The first contract for the updated 590s with a heatshield and bayonet lug was issued in 1987 and, since then, all branches of the U.S. military, as well as the Coast Guard, have ordered the gun at one time or another for tasks including security, EPW control, EOD use, and in door breeching with barrel lengths varying between 14 and 20 inches.

The guns have seen frontline service in Panama, Desert Storm, and during the GWOT era in Iraq and Afghanistan.

Trench Grenade, a GunTuber who is an active duty Army infantry instructor in his day job, last week did a 500-round burn down with the M590, further underlining it as the people’s champ.

A Deep Dive on the New Glock Gen 6 Models (G17, G19, and G45)

We traveled to the GlockMothership in Georgia to get the scoop on the company’s new Sixth Generation guns and have all the juicy information.

Summary: The new Gen 6 Glocks look much like the previous five generations (even fitting most existing holsters), but address a lot of issues that people have asked for on an upgrade. The guns are direct-milled optics-ready, have a new flat-faced trigger while keeping many of the same internals, the ergos are much improved, and they still accept legacy magazines and sights. All for the same asking price as Gen 5 MOS models. Rumors of a modular fire control system are false.

Now let’s get into it

The new Gen 6s at first will be all 9mm, with the G19, G17, and G45 at launch and the G49 available overseas. We are advised that other models are inbound.

Glock Gen 6
The Gen 6 Glock G19, G45, and G17. The additions to the ergos are obvious, including the trigger shoe, palmswell, texturing, and thumb pad/gas pedal. (Photo: Chris Eger/Guns.com)
Glock Gen 6
A closer look at the production Gen 6 G17. (Photo: Chris Eger/Guns.com)
Glock Gen 6
And note the ambi slide catch lever. (Photo: Chris Eger/Guns.com)

The Glock generations from 1 through 6 look very (very) similar when stacked side-by-side, and there is a reason for that: consistency. Anyone who had a Gen 1 in 1986 could be transported to 2026 and pick up a brand-new Gen 6 and figure it out in about three seconds.

Glock generations
The Six Glock generations side-by-side (Photo: Glock)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
The Glock Gen 5 G19 compared to a Glock Gen 6 G17. Note that the legacy model has less texture, a curved trigger, and a dual spring recoil assembly. (Photo: Chris Eger/Guns.com)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
A look at the slides compared. The extractor channel is now sealed to prevent folks from oozing excess thread lock into their slide internals when mounting optics. (Photo: Chris Eger/Guns.com)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
The frames are compared at the action, with the Gen 6 on the left and Gen 5 on the right. The layout is the same, but the geometry is a little bit different. (Photo: Chris Eger/Guns.com)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
Backplates compared. (Photo: Chris Eger/Guns.com)

The Gen6 may look remarkably like previous generations, by design, but it is quite different when it comes to ergonomics, optics mounting, and parts. For instance, it has a new trigger, a new slide, and mostly new internals.

Legacy parts that will work besides the magazines, backstraps, and sights are the locking block, mag release, firing pin and spring, slide lock/spring, trigger pin/housing, trigger bar, recoil spring assembly, and connector. Almost everything else is Gen 6 only.

The differences are so substantial that Glock’s Training division told us that, moving forward, the traditional Glock Armorer’s Course, which has long been one day covering all generations, will now just cover the Gen 5s and 6s, with a separate course dedicated to “Classic” Glocks.

Glock Gen 6 extractor package
The downsized extractor package (extractor pressure piece, extractor frame, extractor package spring) is completely different but can still be removed with just the standard Glock armorer tool. It was redesigned to allow more space for the Optics Ready System, and the extractor channel is now sealed off. (Photo: Chris Eger/Guns.com)
On the topic of user comfort, the new palmswell comes from scanning hundreds of Glock users to produce a cross median that provides a more optimal fit. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The new RTF6 grip texture combines the old-school RTF2 substrate with the RTF 4 polymids to create something altogether different. Further, the grip texture has been expanded to reach higher on the frame and onto the thumb rest to give the user more grip purchase opportunities. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The enlarged, frame-mounted beaver tail encourages a higher grip while still avoiding slide bite. It ships with two interchangeable backstraps (2mm and 3mm) and is compatible with Gen 5 straps. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The flat-face trigger has an advertised pull weight of 5.5 pounds, and we noted it to have a good reset. It keeps the traditional trio of Glock “Safe Action” internal safeties, including the trigger shoe pivot, firing pin safety, and drop safety. (Photo: Chris Eger/Guns.com)

All standard frame Gen6 Glocks will be optics-ready, and it isn’t the old MOS system (which is gone) or the new A-Cut COA system. It uses a plate system on a slide that has been redesigned so that the optic bed sits deeper into the slide for a lower height over the bore axis.

Glock Gen 6
The 3mm plate is polymer and is advertised as working as something of a shock-absorber/crush washer that fits in a 3mm recess, while the optic screws directly into the slide, which has four screw holes, sort of a direct-mount with a twist, if you will. (Photo: Glock)
Glock Gen 6
The result is that the optics sit flat while having the benefit of a polymer buffer of sorts. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The ambi slide stop lever has been redesigned and now has a larger border around it molded on the frame to prevent accidental activation. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The undercut trigger guard (finally, Glock) helps with a higher grip while keeping enough “beef” so that you don’t risk frame cracking on duty holsters. (Photo: Chris Eger/Guns.com)
Glock Gen 6
It has deeper slide serrations, including front slide serrations, which have not been standard on legacy models. (Photo: Chris Eger/Guns.com)
Glock Gen 6
It uses a gently flared magwell and accepts Gen 5 magazines. (Photo: Chris Eger/Guns.com)
Glock Gen 6
Glock has finally added a thumb rest/gas pedal/thumb pad on each side of the gun. To make sure it would still fit legacy holsters, the frame internals on this section have been redesigned to allow the extra texture without making the pistol wider at this point. (Photo: Chris Eger/Guns.com)
Glock Gen 6
Looking at reliability, Glock— which has been working on the Gen 6 since 2022— has had test guns survive 40,000 rounds of mixed ammo, aced salt fog/mud/sand tests, and met all its other standard testing protocols. We fired all three production models on the range for a few hundred rounds and experienced no issues. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The Gen 6s will start shipping to be “on dealer shelves” for a Jan. 20, 2026, official launch, with three magazines and three optics plates, as well as all the standard Glock stuff. (Photo: Glock)

The MSRP on the new Gen 6 Glock models is $745, which is the same cataloged price as the Gen 5 MOS models.

We have review models inbound, so expect more details in the coming weeks.

Cel Shaded Cerakote Celebration: Beretta APX A1 Full Size Tactical

“You can’t ever be too rich, too good-looking, or too well-armed,” as the man says, and a Florida FFL Cerakote shop delivers on that mantra.

Fort Lauderdale-based A Really Bad Design is Alex Manzotti’s studio. A custom artist who cut his teeth using automotive paint on motorcycles and helmets more than 28 years ago, he first encountered Cerakote when a client insisted on using the coating on a bicycle. Four years ago, Manzotti and the shop became Cerakote certified, specialized in artistic applications, and today, as a 07 FFL/ 02 SOT, works exclusively with Cerakote, using it on firearms – and everything else.

A quick look at the shop’s social media shows they have done hundreds of firearms since then in any number of styles.

A Really Bad Design Cerakote Berettas
Check out these brushed steel Berettas with color accents. (Photos: A Really Bad Design)
A Really Bad Design Cerakote Berettas
And these shotguns are done in camo and blue splash. (Photos: A Really Bad Design)

Cel shading

One of the most complicated Cerakoting techniques is mimicking cel shading or “toon art.” Cel shading dates back to the 1980s and is typically applied to flat animation to create the illusion of depth, effectively turning 2D into a perception of 3D. Moving into more modern eras, rotoscoping and Sobel filtering have taken traditional cel shading to a sharper edge, as seen in popular game franchises such as “Borderlands.”

Taking that 2D to 3D style and emulating it on a real object, such as a bike helmet or a firearm, takes skill and genuine artistic capability.

Manzotti has both.

Check out these five Beretta APX A1s he did earlier this summer as a project for the iconic gunmaker:

A Really Bad Design Cerakote Berettas
(Photos: A Really Bad Design)

For Cerakote nerds, the colors used in the project included Periwinkle, Carbon Black, Yellow Jacket, Prison Pink, Slate, Aztec Teal, Burnt Orange, Black Cherry, Robin’s Egg Blue, and Green Mamba.

The result is two APX A1 Full Size Tacticals (Yellow and Gray), and three standard APX A1 full-size models (Cherry, Toxic Green, and Miami Daze).

Beretta sent us the Gray Tactical for a closer look, and it’s impressive. We specifically asked for the Gray as it would give us a better look at the technique, and with cel shading, it is all about the time-consuming technique.

“The work is entirely manual and has many steps,” Manzotti told Guns.com, speaking to how cel shading is harder to pull off when compared to some other effects.

Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
APX Tactical models are optics-ready and have really decent suppressor-height sights. (Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
Note the threaded barrel and accessory rail, as well as the attention to shading detail applied by ARBD. (Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)
Cerakoted Beretta APX A1 Full Size Tactical
(Photo: Chris Eger/Guns.com)

As with everything, natural lighting makes colors look different.

Cerakoted Beretta APX A1 Full Size Tactical
Outfitted with a SilencerCo 36M and a Surefire X300T, in their natural matte black/graphite. 
Cerakoted Beretta APX A1 Full Size Tactical
You can’t have an APX Tactical and not make it…tactical. 
And yes, it still shoots, as you would expect for a Beretta. Those extendo mags really help with reloads. 

We’d like to thank Alex Manzotti and the whole gang at A Really Bad Design for their help with this piece, as well as everyone over at Beretta who helped make it possible.

High Feature Plinker: Review of the Ruger Mark IV 22/45 with Threaded Bull Barrel

The Ruger Mark IV, the modern evolution of the original circa-1949 Ruger Standard (Mark I) pistol, was introduced in 2016. This updated model features a more user-friendly design, highlighted by a tool-free, one-button takedown mechanism that makes fieldstripping and cleaning significantly easier for users.

Following the release of the Mark IV, Ruger introduced the Mark IV 22/45 variant. The name “22/45” refers to the grip angle and surface controls, which closely emulate those of the famed M1911 Government pistol. Despite this design innovation, the initial 22/45 variant did not include a threaded muzzle or a top Picatinny rail. These features were reserved for the more expensive Mark IV 22/45 Tactical model, which carried a suggested retail price of $669.

Ruger has since released a bull-barreled version of the Mark IV 22/45 equipped with both a Picatinny rail and a threaded muzzle– as featured in this review. This model is offered at a suggested price of $449, with even lower prices often available through retailers. Additional aesthetic improvements include color-matched details; the trigger and Picatinny rail both feature a stainless finish, resulting in a distinct two-toned appearance.

Thus:

The bull-barreled version of the Mark IV 22/45 equipped with both a Picatinny rail and a threaded muzzle
Our review Mark IV 22/45. It has a very 1911-ish overall length of 8.5 inches with an unloaded weight of 33.3 ounces. (All photos: Chris Eger/Guns.com)
The bull-barreled version of the Mark IV 22/45 equipped with both a Picatinny rail and a threaded muzzle
As teased earlier, it is both suppressor and optics-ready right out of the box. It is equipped with a Holosun 507C sight on a Picatinny base, and a SilencerCo Switchback modular suppressor in its long format. The as-shown weight is 41 ounces. 

The Mark IV 22/45 in this format is close to being perfect when it comes to an all-around rimfire semi-auto pistol. It feels and looks good, is dependable and accurate, and just about every component has a dozen aftermarket upgrades available.

We ran it with a few different cans and several different ammo loads and found it to run almost 100 percent of the time. The worst thing we can say is that it gets seriously dirty, something no 22 is immune to, and you must stay on top of that every few hundred rounds to keep it running.

Compared to the rest of the market, this Mark IV 22/45, as reviewed, is priced right, especially for the big Pic rail on top, the threaded bull barrel, and American manufacture. Sure, guns like the SIG P322 have a significantly larger magazine capacity for about the same price, but its optics interface isn’t as luxurious, you get a pencil barrel, and the aftermarket support doesn’t come close to what is available for the Ruger. The closest Buckmark in features would be the Micro Bull SR, which runs significantly more than the Mark IV.

The only problem we foresee in having one of these neat little Rugers is how often you need to buy ammo.

Full review in my column at Guns.com. 

At least Bond got his: Walther Ends Production on PPK, PPKs, and PP Pistols

Firearms giant Walther this week announced it was beginning a “multi-year pause of production” on its most iconic pistol lines.

As part of Walther’s “long-term product vision,” the PPK, PPK/S, and PP models will no longer be produced as the company enters into a “multi-year reengineering and modernization program.” Walther officials stress this initiative aims to enhance performance, integrate advanced manufacturing technologies, and elevate the user experience – all while preserving the iconic look, feel, and spirit that have defined these pistols for generations.

“This is not the end of the PPK story,” said Tyler Weigel, VP of sales for Walther Arms. “It’s the beginning of a new chapter. Our goal is to honor the heritage of these iconic firearms by bringing them into the future without compromising what made them classics.”

PPK slides on the assembly line in Ulm, Germany
We saw PPK slides on the assembly line in Ulm, Germany, last year. Little did we know they would be some of the last – for now. (Photo: Chris Eger/Guns.com)

Related: Home of the PDP and PPK: Factory Tour of Walther’s German Plant

The original PP (Polizeipistole or “Police Pistol”) was introduced in Weimar-era Germany by Carl Walther in 1929. Originally chambered in .32 ACP, the pistol has evolved over the years into more compact PPK and import-compliant PPK/s variants with other calibers such as .22 LR and .380 ACP added to the mix.

The Walther factory, shifted from Zella-Mehlis in Soviet-occupied East Germany to Ulm in West Germany after World War II, eventually resumed production on the PP/PPK just in time for it to become a staple of international espionage movies during the Cold War.

While Sean Connery’s Agent 007 was issued a Walther in the first 10 minutes of 1962’s “Dr. No” to replace his favored .25 ACP Beretta, it would continue as his standard through his six-film run and go on to be picked up off and on by successive generations of Bonds.

You can bet that collectors will now be moving in on the new old stock PP series pistols that remain on shelves – before they disappear like a spy into the mist.

A Clear Choice: The Shield OMSsc Micro Red Dot

We came across the OMSsc while doing a review on a pistol and thought enough about it to do a separate review of the optic. Naturally, one would only do this to either be the town crier to shame the optic for poor performance, or to point out how original or pioneering it came across while in use. This review is the latter.

Springfield Armory sent us a Hellcat .380 for review purposes in August 2025 with a Shield OMSsc 4-MOA red dot installed– which has the same form factor and proven performance of the RMSc, but with a panoramic see-through top hood.

Since we spent three months running that pistol with this interesting new sight mounted, we felt a separate review of the sight was in order.

Candidly – and stay with me here – I am just not a fan of micro red dots on carry guns, despite having extensive use with both. Don’t get me wrong, I own probably 10 rifles right now with electro-optic red dots (Aimpoint PRO, Eotech XPS3, Vortex Spitfire, SIG Romeo 5) on them as well as several full-sized pistols with large mailbox-sized enclosed red dots (think ACRO, Steiner MPS, Burris Fast Fire E, etc) but have just always struggled to “find the dot” in a fast enough time on a open emitter MRD to justify losing a half-second on my draw.

I find myself faster on target when drawing a small gun from concealment when using iron sights. This may be because I’ve been shooting handguns for 40 years, with a lot of that being on guns with very poor sights (looking at you, J-frames). Micro carry red dots only came into play in the past decade, so I default to what I am comfortable using. On larger, more full-sized pistols, I can get a better grip and don’t suffer the same “bounce and adjust” when coming up on target, especially when using a big honking, almost competition-sized enclosed dot.

However, with the Shield OMSsc, I felt the time shift in bringing the dot to my eyes, a feeling more akin to using a larger sight. Cutting back on the hood without cutting back on the hood helped me to very rapidly “hook into” the dot, if you can follow.

TL;DR: I liked it and shot well with it, without having to search for the dot as much as I usually do with other open emitter red dots.

Big Iron! A Review of the Taurus Deputy Single Action Revolver in 45 Colt

Taurus has been well-known worldwide for its double-action revolvers since 1941, but only got into the more retro single-action wheel gun market more recently.

The company’s first single-action offering, the Taurus Gaucho, popped up briefly in 2005, then faded back into gun lore.

Since then, Taurus acquired Heritage Manufacturing in 2012, which makes a tremendous amount of single-action rimfire caliber revolvers every year, like 187,000 guns a year kind of production.

With the company owning such a huge slice of the rimfire single gun market, as well as the double-action centerfire market, it’s only natural that Taurus would make a traditional “four click” revolver.

In late 2024, it debuted the Deputy. A SAA-based revolver offered in two barrel lengths, a 4.75-inch “gunfighter” style, and a longer 5.5-inch, as well as in the iconic .45 Colt or .357 Magnum calibers, the Deputy is ready to ride.

Taurus Deputy 5.5-inch format in .45 Colt
We’ve been testing and evaluating the Taurus Deputy 5.5-inch format in .45 Colt for the past four months. (All photos: Chris Eger/Guns.com)
Taurus Deputy 5.5-inch format in .45 Colt
The 5.5-inch barrel gives the Deputy an overall length of 11 inches. Weight is 38 ounces. 

Quick summary: We reviewed the 5.5-inch barreled .45 Colt variant of this classic six-shooter with modern safety features and found it to be a good, if beefy, “smoke wagon” at an affordable price.

For the full review, head on over to my column at Guns.com. 

« Older Entries Recent Entries »