Tag Archives: ceger

The SCAR is back in town

After sunsetting the legacy SCAR last year, FN has the new generation of its venerable modular rifle for 2026 – and they are softer recoiling, accept suppressors, and don’t eat scopes anymore.

First fielded in 2008 as sporter (semi-auto) variants of the USSOCOM SOF Combat Assault Rifle, the 16S, 17S, and 20S were a top-shelf option on the commercial market until FN closed that line late last year. Let’s be honest, the original SCAR series was cool but had some issues, and a few needed a significant redesign to fix.

That brings us to the new SCAR line.

The old SCAR, top, compared to a new SCAR, bottom. (All photos: Chris Eger/Guns.com)

Among the new features is that the rifles are optimized for suppressors with a U.S.-standard muzzle profile and barrel shoulder. The platform’s short-stroke gas piston system uses a two-position adjustable gas regulator for improved reliability with cans and different ammo types. The adjustment is accessible via an access port in the heat shield. It works and is an upgrade from the old exposed gas block. Doubling down on the platform being suppressor-friendly as a selling point, FN even designed some new cans just for the SCAR, which we will get to in a separate article.

Another issue with the now-classic SCAR was the tendency to blow out scope crosshairs due to the, well, let’s just call it aggressive recoil. The new SCAR has a new (and lighter) hydraulically buffered modular two-piece bolt carrier that softens recoil. In testing last summer on the range between the old SCAR and the new ones, we could feel the chop decrease and the recoil impulse smooth out significantly.

We found the new SCARs to be much less choppy on the range in testing. 
The new bolt carrier system helps with those tight repeatable groups on the 20S as well, which runs a heavy contour 20-inch barrel that now features 5R precision rifling with hammer-forged/chrome-lined durability. We were able to nail confirmed hits on target at 1,385 yards on a new gen SCAR 20 (6.5CM) in front of a crowd (no pressure) after just a few minutes of instruction.
FN realized that the handguard needed to be updated, so now the upper is a good bit longer with less exposed barrel and uses an integrated rail system, replacing the short M1913 rails with a ton of M-LOK accessory slots at the 3, 6, and 9 o’clock position – even on the SCAR 20S precision rifle. Plus, the 16S and 17S rifles now ship with a colorway-matching vertical foregrip. 
When it comes to the new SCAR 20S, it runs a rubber over-molded Ergo pistol with a generous palmswell and a fully-adjustable stock. 

Triggers have been upgraded with the 20S using an improved FN-designed two-stage precision trigger for better control and feel, providing a 3.5 to 4.5-pound trigger pull. The 17S and 16S have a single-stage trigger that has likewise been updated.

For ergonomics, the pistol grip is now compatible with AR grips and, while the 16S and 17S still ship with the traditional “Ugg Boot” side folding adjustable stock, an AR stock and tube system can be installed.

Yessss.
The new SCARs will accept different stock options. 
This is a thing now for the SCAR…
There is even the possibility of using the SCAR SC stock. 

You also have more QD cups in more places, and all the guns are “Nerch” (Non-Reciprocating Charging Handle or NRCH) variants.

Whereas the old SCAR was kind of limited in the functionality for southpaws, the new ones are fully ambi when it comes to the bolt catch/release, mag release buttons, and safety levers. Even the selector switches are modular now.

When it comes to durability and serviceability, the old SCAR used Hex screws that could strip, whereas the new ones run Torx, among other changes. We were advised that the testing protocol on these guns was no joke, and the new generation SCAR is designed and built with feedback from nearly two decades of end users, many of whom are “tip of the spear” types.

The new SCARs will be available in 15 different variants across the 16S (5.56 in either FDE, Gray, and Black), 17S (6.5CM or 7.62 NATO in FDE, Gray, and Black), and 20S (6.5CM or 7.62 NATO in FDE, Gray, and Black) models.

You gotta love those Gray models. Cue Jean-Baptiste Emanuel Zorg with “my favorite.”

As for those still hungering for the pistol variant, the SCAR 15P, it survived the great SCAR cull of 2025 but didn’t get any of the new updates and is available in 5.56 and .300BLK, with the latter just screaming for a now zero-dollar Form 1 SBR conversion.

Here comes the rough stuff.

While the new and old SCARs look very much the same – and that was done on purpose for continuity – very little is backward compatible between the discontinued traditional models and the new ones. About the only things that are shared/swappable between the two are the NRCH charging sled (if you had an NRCH model), barrels, magazines, the 9310 bolt and firing pin, and some small springs and pins.

If you have an older SCAR and love it, FN wants you to love it still, and they are supporting those guns for at least the foreseeable future. Remember, they are still making and supporting military/LE contract classic SCARs around the world.

MSRP on the new SCARs is comparable to that of the old guns, but they are still a more top-shelf price than, say, your average AR. The new FN SCAR 17S variants run $3,999, while the 16S is slightly cheaper at $3,799, and the long boy, the 20S, is $4,499. Of course, that is the MSRP, and you can bet that the reseller crowd is going to move into high gear with these, so watch out for the gouging. But if your heart is pure and you wish hard enough and look long enough, you could find one that fits the Ugg-sized hole in your gun safe.

Welcome back, SCAR.

We missed you.

New: FN 309 Optics-ready Hammer-fired 9mm Pistol

Just in time for SHOT Show, FN has debuted its newest double-stack 9mm pistol: the feature-packed and more affordable FN 309 MRD.

The 309 takes cues from the company’s well-received Reflex series of micro 9s, using a DAO internal hammer operation and direct-mount Shield RMSc/Holosun K/Leupold DPP footprint with adapter plates available for other dots.

The unloaded weight is 18.4 ounces with an empty mag. We found the Reflex in its most svelte form, with 12 rounds of Federal’s Punch JHP 124-grain self-defense loads and no optic, to hit the scales at 23.4 ounces. Shown with a DeSantis Inside Heat, which, although made for the single-stack FN 503, fits it like a glove.

In fact, the FN 309 is basically a Reflex XL, but it is a little bigger, holds more bullets, is $150 cheaper, and uses easy-to-load and more affordable ($20 rather than $50) magazines. Plus, it is easier to rack and very slim, all good things for first-time pistol buyers: the demographic FN is pitching to for this one.

The FN 309
The FN 309 is new for 2026. (Photos: FN)

It has styling similar to the company’s other pistols, but make no mistake, the 309 is its own ecosystem, using proprietary (but inexpensive) 16 and 20-round polymer-bodied magazines. Plus – and this is a win for first-time gun owners and those with reduced hand strength – it requires lower racking force without a gimmick.

The pistol is carry-sized and leans more compact than sub-compact, with a 3.8-inch alloy steel, machine-gun grade, barrel with a recessed target crown. This gives it an overall length of 7.4 inches and a weight, due to its polymer frame, of 22 ounces. The guns ship standard with FN 509 pattern drift-adjustable sights, using an over-molded green fiber-optic front and rounded U-notch rear. Other features include an accessory rail, a reversible magazine release, and multiple safeties, including a firing pin block and trigger safety. Manual safety models will also be available.

The MSRP on the FN 309 is $549, which is likely to be closer to $450 at retailers once supply starts flowing.

The FN 309
We were able to travel to South Carolina last summer to check out the 309 “in progress,” shooting a table full of early production pistols along with a group of other gun media. (Photos unless noted: Chris Eger/Guns.com)
The FN 309
Note the polymer magazines in 16 and 20-round variants, which FN advises will be inexpensive (think $25) at retail. Compare that to FN 509 mags, which run $50-$90 depending on the model. 
The FN 309
The FN 309 is a simple design and field strips without pulling the trigger – a big deal for a lot of users. 
The FN 309
Note the internal hammer-fired operation of the FN 309. 

The gun shot well in initial testing, with the Guns.com crew putting about 500 rounds through a couple of pistols over the course of a couple of hours. A relay team ran 1,160 rounds on a very hot torture test gun without a serious issue, so there is definitely a potential for the 309 to be something FN is proud to have in its catalog.

The gun is pitched as a more entry-level pistol than the company’s duty-grade 509s, which start at $750 for basic vanilla models and run to $1,600 in the more bespoke Edge package guns. Even the 15+1 round FN Reflex XL MRD has a suggested ask of $719.

“Many gun buyers don’t see FN as an option, and we wanted to change that perception by making the brand accessible to people looking to spend $500 on a 9mm pistol,” said Chris Johnson, Senior Product Manager for Pistols for FN America, LLC. “With the FN 309 MRD, we now have a trustworthy, easy-to-use pistol perfect for new gun buyers and those looking to purchase their first FN. For us, it’s not just a new product, it’s FN’s commitment to offering the everyday user peace of mind and FN performance.”

The FN 309 ships with a 16+1-round flush-fit and 20+1-round extended magazine, with options for 10-rounders in restricted states.

We have a review model inbound, so expect to see more on the 309 in the coming weeks.

Plus, if you like this, you are going to love what is announced later this morning.

Shooting Illustrated Prints Final Issue, Ends 25 Year Run

In my opinion, the only decent NRA pub…

As part of a restructure and streamlining of operations, the NRA-published magazine, Shooting Illustrated, ended its run this month.

The final issue, Vol. 25 No. 1, officially the January 2026 issue, is the last for Shooting Illustrated, capping a quarter-century run.

The end was not a total surprise as the NRA had announced last October that it was ending publication of both America’s 1st Freedom and Shooting Illustrated, along with halting the Shooting Sports USA digital magazine (but not the website), and trimming the publishing of print issues of its two remaining media titles, American Hunter and American Rifleman, to “premium monthly digital editions with quarterly print issues.”

The moves came, as NRA EVP & CEO Doug Hamlin explained, to “create a leaner NRA that allows us to fight harder for our members.”

Shooting Sports Illustrated was unique in a number of ways.

When it was first released in 2001, the NRA offered a choice from four magazines available for free to members (American Rifleman, American Hunter, America’s 1st Freedom, and Woman’s Outlook) while NRAinSights was available for junior members. Meanwhile, Shooting Sports USA and Shooting Illustrated were subscription-only (you had to pay extra for them), with the latter being the only magazine in the organization’s stable that was available on newsstands. This meant that even those who weren’t NRA members would see Shooting Illustrated on magazine racks down to the gas station level. There it was, mixed in with the big boys like Guns & Ammo, the Shotgun News, and American Handgunner.

It long featured Richard Mann’s Bullet column, which first appeared in 2007, and the most recent issues carried Sheriff Jim Wilson, Steve Adelmann, Tamara Keel, Jeff Johnson, Tatiana Whitlock, Guy Sagi, and others on its masthead.

The magazine was only offered to NRA members as a journal choice after 2016.

The most current circulation figures available for Shooting Illustrated, as compiled by the Alliance for Audited Media in 2023, stood at just over 600,000. Comparatively, America’s 1st Freedom had 560,000; American Hunter, some 780,000; and American Rifleman, 1.5 million. So the math makes sense if you were going to snuff out two of the four, which two should get the ax.

The two volumes will be treasured in the collections of firearms enthusiasts. They will join the likes of print issues of Soldier of Fortune, which switched to digital only in 2016, the myriad of titles printed by Paladin Press, which closed in 2017, and even the Guns.com print magazine, which was published in 2023-24. Last November, the news came that the print editions of GUNS Magazine and American Handgunner magazine are ending after 70 years, leaving only digital issues.

Other gun publications have come and gone, then made a resurgence, such as Field & Stream, which recently returned to newsstands, and assorted titles from Harris Publications, which were down and out in 2023, then found a new home with Athlon/Bleecker Street– at least for now.

In 2020, Field & Stream, the outdoor magazine that first appeared in 1871, ceased publication of its print edition but recently reemerged after a three-year hiatus under new ownership– so never say never! (Photo: Chris Eger/Guns.com)

So are print gun magazines dead?

Our friend Ian McCollum opines on that question, below.

CMP Production Inventory status on M1903, M-1 Garand, and M1911s

From the latest CMP Director’s annual report on Production. Keep in mind that the NDAA also included the provision to transfer milsurp pump-action shotguns, which will probably start in 2027. 

Drill Receiver Reclamation Project: The Drill Receiver Reclamation Project is a landmark initiative designed to restore tens of thousands of previously deactivated M1 Garand and 1903A3 drill rifles into safe, functional firearms. With original receiver inventory nearly exhausted (note: CMP continues to work with the US Government to identify options for the return of US-provided M1s from foreign countries), CMP identified this project as a critical way to sustain future rifle production and preserve important historical assets. Extensive testing, engineering oversight, and transparent communication have positioned this program as a model for responsible firearm reclamation and safety assurance.

    • Scope and Inventory: Began with ~75,000 serialized drill rifles (M1 Garand and 1903A3)
      • 10,000 M1s classified as ‘good’ (Category A)
      • 26,000 M1s classified as ‘medium (Category B)
      • 15,000 M1903/A3s in a condition supporting reclamation
      • 24,000 as ‘scrap’ (Category C – deferred due to cost and condition)
    • Partnerships: CMP partnered with Heritage Arms (manufacturing) and Prospector Training of Florida (ballistic testing and validation).
    • Testing: A rigorous validation program included destructive testing and proof loads exceeding 80,000 psi—demonstrating exceptional strength and safety.
    • Production: CMP placed an initial purchase order for ~20,000 receivers across the recoverable categories.
    • Identification: All reclaimed rifles and receivers carry an “RC” item number prefix to clearly differentiate them from legacy products.
    • Customer Reception: Initial market skepticism was overcome through education, transparent documentation, and in-person demonstrations at the 2025 National Matches.
    • Sales Strategy: CMP introduced stripped and barreled receiver sales at low margins to build customer trust and demonstrate quality firsthand.
    • Sustainability: Sales velocity has stabilized, providing a multi-year supply of reclaimed receivers for production and sales.
    • The project inventory will support nearly 2-3 years of sales.
       

CMP 1903A3 Expert Rifle Program: A key component of the Drill Receiver Reclamation initiative is the development of the CMP 1903A3 Expert Rifle, CMP’s first bolt-action rifle to carry the Expert Grade designation. The project utilizes reclaimed 1903A3 receivers from the drill inventory, each carefully inspected and refurbished to CMP’s Expert standards. This launch expands CMP’s product line and appeals to collectors and shooters seeking historically accurate bolt-action rifles.

      • All supply chain inventory has been acquired, and the Armory is staged to begin assembly.
      • Production Start: Scheduled to begin in November 2025, with initial inventory and public release expected in January 2026.
      • Configuration: Each rifle features a new Criterion barrel, new Minelli walnut stock, refinished metal parts, and authentic GI-style hardware.
      • Grading and Finish: Rifles will meet the same cosmetic and performance criteria as CMP’s M1 Expert Grade rifles.
      • Variants: Plans include a scoped 1903A4 model using Hi-Lux M82 optics and potential chambering in .308 Winchester and .30-06 Springfield.
      • Strategic Impact: This expansion diversifies CMP’s product offerings and ensures efficient use of reclaimed assets while appealing to both historical and modern shooters.
         

New CMP M1 Rifle Project: The New CMP M1 Rifle Project represents a return to U.S.-based production of forged, USGI-spec M1 Garand receivers. This is CMP’s first move into commercial firearms manufacturing.  

We have partnered to manufacture parts and components for several years, but never receivers. This program ensures the long-term viability of M1 rifle sales after the depletion of legacy and reclaimed receiver inventories while offering a quality product for those who do not wish to purchase a reclaimed offering.  

For those more interested in performance over collectability, the newly manufactured CMP M1 is the clear choice. It delivers a product that is both faithful to the original design and built to modern manufacturing tolerances and materials standards.

    • Purpose: Ensure long-term rifle production continuity through a newly manufactured, USGI-spec forged receiver
    • Partnership: Multi-year R&D collaboration with Heritage Arms covering 3D scanning, CAD modeling, prototype machining, and validation
    • Prototypes cleared for test batch “T Lot” production in early 2025
    • Testing: Over 100 serialized T-prefix test rifles produced, fired through 16,000+ rounds during developmental validation
    • Numerous iterations and improvements between small lots within the “T” series
    • T Lot proving conclude mid-summer, and preorders were opened for eager customers
    • Founder Series: We received 607 preorders placed in 2025 under the FNDR prefix (231 in .308 and 376 in .30-06), representing the first commercial batch
    • Production Status: Full production underway. Initial Founder Series shipments began in early November 2025.  Standard production units will begin shipping early in 2026.
    • Specifications: Forged USGI Spec receiver, Criterion or Faxon barrel, forged reproduction stainless steel gas cylinder, and new walnut stock. MSRP: $1,950 for either caliber (.30-06 or .308 Win)
    • Future Models: Planned expansion to include M1D, and “Tanker” variants, as well as alternative calibers. Development is also underway on several other exciting variants that will be announced as we roll into the new year.
    • Strategic Value: Ensures a sustainable, U.S.-based manufacturing capability that preserves authenticity while meeting modern expectations for quality and precision

M1911 Pistols: Our inventory and sales of M1911 pistols remain strong. The limit of four pistols per person per lifetime remains in effect for 2026. We do intend to bring in-person sales to the Talladega Marksmanship Park store in the March/April timeframe and to the Camp Perry store in the June timeframe, and before the National Matches. More information on this will be forthcoming after the new year.

First Look at the New 2K11 Comp Double-stack 1911 9mm

Featuring a built-in forward barrel port and matching compensated slide, the newKimber 2K11 Comp series offers a significant reduction in felt recoil while keeping the same popular features as the rest of the series.

Alabama-based Kimber went double-stack 1911 in 2024 after at least a 30-year run in the field of making single stacks. We have reviewed a couple of these excellent pistols since then, and are past the 3K round mark on our original test gun with no hiccups to report, leaving us more than happy to report on the new Comp series.

The guns, launching just in time for the upcoming SHOT Show, will all be chambered in 9mm and available in both 5-inch full-sized (Government) and 4.25-inch Pro (Commander) sizes, shipping with flush-fit 20 and 19-round magazines, respectively.

Each will also be offered in either a black DLC or matte stainless variant, giving Kimber four new 2K11 Comp models for 2026: 5-inch black (669278350783) and stainless (669278350806) and 4.25-inch black (669278350738) and stainless (669278350752) with an MSRP running between $2,345 and $2,499, with the DLC guns hitting the higher end, because of DLC.

The new Kimber 2K11 Comp series 
A sampling, showing that big ol’ comp. (Photo: Kimber)

“The 2K11 Comp is the culmination of years of preparation and hundreds of thousands of rounds of testing to deliver the most fully featured comprehensive handgun we have ever produced,” said Pedi Gega, Director of product development, assembly, and finishing. “The new 2K11 family of compensated models creates the highest class of firearms for the discerning enthusiast and competitive shooter.”

Kimber sent us an SST (stainless) 2K11 Pro Comp model for testing.

The new Kimber 2K11 Pro Comp SST in 9mm. 
The pistol looks great, which is no surprise as the 2K11 series is crafted with superb attention to detail, one at a time, by skilled technicians, not just slapped together. Being a Pro model, its 4.25-inch barrel gives an overall length of 7.79 inches. (All photos unless noted: Chris Eger/Guns.com)
The new Kimber 2K11 Pro Comp SST in 9mm. 
Note the external extractor, ambidextrous thumb safety, and bumped grip safety, which are standard across the line.
The new Kimber 2K11 Pro Comp SST in 9mm. 
Weight is 33.4 ounces, even with a full-length rail on the dustcover of the frame. Note the lightening cuts to the slide, seen previously on Kimber’s top-shelf Rapide series, which provide faster lock-up. 

The most noticeable enhancement to these guns over the standard 2K11 series is the massive 0.16 square inch integrated compensator forward of the front sight. This feature noticeably reduces muzzle rise and felt recoil, plus it creates an incredibly fun and controllable shooting experience.

The new Kimber 2K11 Pro Comp SST in 9mm. 
The integral comp is big enough to double as an ashtray if needed. 
The new Kimber 2K11 Pro Comp SST in 9mm. 
The four new compensated models also feature Kimber’s brand-new carbon fiber grip infused grip module that is compatible with corresponding Stan Chen Magwells. We found the grip to be aggressive but not overly. 

The Comp guns also share the current 2K11 features, such as Kimber’s in-house toolless guide rod, an external extractor, a bushing-less, crowned, and fluted barrel, a GT trigger, and more.

The new Kimber 2K11 Pro Comp SST in 9mm, compared
The Kimber 2K11 Pro Comp SST 4.25 compared to the standard full-sized Black DLC 2K11. 
The new Kimber 2K11 Pro Comp SST in 9mm, compared
And compared with the non-comped Kimber 2K11 Pro SST, which sports a Kimpro Granite finish and Kevlar carbon fiber grips. Released last August, this gun hinted at what the Pro Comp would become. 
The new Kimber 2K11 Pro Comp SST in 9mm, compared
Note the top ends of the Kimber 2K11 Pro SST and Pro Comp SST
The new Kimber 2K11 Pro Comp SST in 9mm. 
The Kimber 2K11 Pro Comp features a cover plate with an adjustable rear sight. A TAG Precision FiberLok 2 front sight with additional red and black fiber-optic inserts is included. All models ship with a TAG Precision RMR adapter plate that takes the place of the rear sight. 
The new Kimber 2K11 Pro Comp SST in 9mm. 
Our test gun shipped with two 19+1-round Checkmate Double Stack Ultra-Hi Capacity 126mm mags. Full-length models ship with a flush 17+1, and two extended 20+1 round mags. The mags, reverse 2011-compatible, are all metal, including an aluminum base pad and steel retainer for maximum made-in-the-USA durability and longevity. Word of caution: they are a beast to fully load. 
The new Kimber 2K11 Pro Comp SST in 9mm. 
The Kimber 2K11 Pro Comp has an easy takedown without tools due to its toolless guide rod system, a feature it shares with the rest of the series.
The new Kimber 2K11 Pro Comp SST in 9mm. 
The aluminum match-grade skeletonized GT trigger has an advertised 3-to-4-pound pull. We found it broke at 3.6, with a short take-up to the wall and a crisp break. Reset is similarly short and is both audible and tactile. Kimber advises that the shoe length has been reduced by 3/32 of an inch, making for a more comfortable overall length. IMHO, the GT is the best production factory 1911 trigger on the market. 

Check out the trigger pull and reset here:

How’s it shoot?

Well, we’ve only had the gun for a couple of weeks and have about 200 rounds through it thus far, so it is a little early to say, but we have experienced no jams and smooth shooting, with less recoil.

Stay tuned for more feedback as we up the round count.

The new Kimber 2K11 Pro Comp SST in 9mm. 
The new Kimber 2K11 Pro Comp SST in 9mm.

Defense Bill Includes Selling Milsurp Shotguns Through CMP

230214-N-NH267-1484 INDIAN OCEAN (Feb. 14, 2023) U.S. Navy Fire Controlman (Aegis) 2nd Class Cody McDonald, from Spring Creek, Nev., fires an M500 shotgun during a visit, board, search, and seizure (VBSS) gun shoot on the flight deck of the Arleigh Burke-class guided-missile destroyer USS Paul Hamilton (DDG 60). (U.S. Navy photo by Mass Communication Specialist 2nd Class Elliot Schaudt)

The military could soon begin passing on surplus pump-action shotguns to the public via the Civilian Marksmanship Program.

Both the House and Senate versions of the National Defense Authorization Act defense policy spending bill for 2026, under Section 1062, call for the Army, Navy, and Air Force to transfer such scatterguns to the CMP.

The one-time transfer would cover guns that are “surplus to the requirements” of the respective service– including being surplus to military history and museum use. Further, they can’t be a shotgun that “is a modern ancillary addition to a service rifle” such as a “Masterkey” style gun that fits under an M16/M4. Also, guns that legally meet the definition of a “short-barreled shotgun” are barred from transfer.

The services would have to report to Congress, at least 60 days beforehand, the number of shotguns, including the make and model, that meet the surplus requirements and the number of which they intend to transfer to CMP.

Furthermore, the NDAA will modify the sale authority under U.S. law to permit the sale of surplus pump-action shotguns. Currently, the federally chartered non-profit, which is dedicated to promoting marksmanship nationwide, can only legally sell surplus rifles such as M1 Garands, M1903 Springfields, M1917 Enfields, M1 Carbines, and .22 trainers, as well as surplus M1911/1911A1 .45 pistols.

The U.S. military has been using pump-action breechloading shotguns for over 130 years, including the Winchester 1893, 1897, and M1912 Riot and “Trench” guns; as well as the Remington Models 10, 12, 31, and 870; the Stevens 520 and 620; the Ithaca 37, and the Mossberg 500/590– the latter of which are still under active contract.

“American M1897 Winchester Trench Shotgun, 12 gauge; American M1917 Enfield rifle; and M1903 Springfield rifle. General Headquarters, AEF Ordnance Department. Chaumont, Haute Marne, France, 4 January 1919.” Signal Corps photo 111-SC-154935. National Archives Identifier 313154926

Shotgun-armed Navy sentry on guard in port, August 1943. Navy Photograph. Courtesy of the Library of Congress PR-06-CN-215-5

Dec. 1942 Production. B-17 heavy bomber Army sentry Boeing's Seattle plant Winchester 12 shotgun riot gun

Dec. 1942 Production B-17 heavy bomber, Army sentry, Boeing’s Seattle plant, Winchester 12 shotgun, riot gun

“PFC. Art Burgess, a candidate in the Ranger Indoctrination Program (RIP), 2nd Battalion, 75th Infantry (Ranger), fires a Winchester-built Model 12 combat shotgun during special weapons training at Range 31, 13 January 1982.” The gun has been modified with a heat shield over the barrel, a bayonet lug/sling swivel, an over-folding buttstock, and a pistol grip. DA-SN-83-09168 Via NARA

As to how many of the above are still on hand in armories, depots, and arsenals– and are considered surplus– is anybody’s guess. Still, U.S. martial shotguns of any type are extremely collectible, leading them to be often faked (always be careful on a “good deal” M97 Trench Gun), so the prospect of a vetted quantity of these veteran guns headed to market is exciting.

The Republican-backed bill would still need to make it to President Trump’s desk and earn his signature, which is likely.

Now, if we can just get Congress to transfer all of those millions of old M16s that are in storage to the CMP, even if it is just the uppers, we’d really be cooking.

Could you imagine…(Don’t get too excited, these are over at Bowman Arms, or will be in early 2026)

Those Lost to the Gun Community in 2025

From international competitors and actors who made six-guns forever iconic to pioneering inventors and household names in the firearms industry, here is a look at those lost to us in 2025.

Lubos Adamec– Czech sport shooter who competed at the Summer Olympics in 1988 and 1992 in mixed skeet. He won three silver and a bronze medal at the European Individual Championships, as well as eight medals in team competitions at the World  Championships. He died in September, aged 66.

Joe Don Baker– Iconic Texas-born actor and Army veteran who appeared in at least three different Bond films, “Guns of the Magnificent Seven,” “Walking Tall,” “Mars Attacks!” “Cape Fear,” and others. He passed in May at the age of 89.

Frank R. Brownell III– The only son of Brownells founder Bob and his wife Lois, Frank grew up in Iowa and became involved in both the family business and the American gun industry at an early age, spending six decades with the company, with breaks to serve in the Navy and attend the University of Iowa. He passed in June, just shy of his 86th birthday.

Lino Cerati – The Italian sports shooter known for competing in the 1976 Summer Olympics, died in November, aged 87.

Wiley Clapp – A Virginia Military Institute alum (Class of 57) and Marine officer who saw heavy combat in Vietnam, Clapp went on to spend a career in law enforcement before he started writing for Gun World in 1986. Since then, he penned hundreds of articles in numerous firearms publications as well as at least two books. Ruger produced the special edition Wiley Clapp GP100 revolver with his input, while Colt’s introduced the Wiley Clapp CCO (Concealed Carry Officers) 1911-style pistol. He passed in June at home, aged 90.

Jimmy Cliff – Jamaican reggae and ska legend known for his amazing cover of Guns of Brixton and, notably, for on-screen S&W wielding in the 1986 Robin Williams comedy “Club Paradise.” He died in November at the age of 81.

Trevan Clough – Represented Papua New Guinea in trap at the 1976 and 1984 Summer Olympics. He passed at 82.

Gunther Danne – German sports shooter who represented West Germany in the 1972 Summer Olympics. He passed in October, aged 82.

Philip H. Dater – The New York-born Dater, a radiologist and Vietnam-era U.S. Air Force veteran known as a founding figure in modern firearm suppressor innovation, started designing suppressors in the 1950s, later “dabbling off-hours in his hospital’s machine shop” before going on to found first the Automatic Weapons Company (AWC) and later Gemini Technologies, today’s Gemtech. A true mentor and pioneer in the field of suppressor development, Dr. Dater died in January, aged 87.

Earl Herring – Maryland-born sports shooter who competed on the U.S. team in the skeet event at the 1968 Summer Olympics. He passed in June, aged 93.

John Brewster “JB” Hodgdon — Well-known member of the firearms community and lifelong resident of Kansas, JB was a staple of the Hodgdon Powder Company for five decades and passed in June at the age of 88.

Val Kilmer – The California-born actor was famous to gun nerds everywhere for his roles as Doc Holliday in “Tombstone” and Chris Shiherlis in “Heat,” among dozens of other iconic appearances. He passed in April, aged 65, but his films will live forever.

John Kopec – Noted firearms historian and author who penned several top-shelf books and collector’s magazine articles on 19th-century martial Colt single-actions. He passed in February, aged 97.

William Theodore “Ted” Kotcheff – Canadian-Bulgarian director and producer who brought the movie “First Blood” (1982), the first in the Rambo series, to life. He also directed “Wake in Fright” (1971), “Uncommon Valor” (1983), and “The Shooter” (1995). He passed in April, aged 94.

Andreas Kronthaler – Austrian sports shooter who competed at the 1984 Summer Olympics. Kronthaler died in March 2025, at the age of 73.

Robert “Bob” Nosler – A Vietnam-era Navy veteran, Nosler joined the family business as its sixth employee and spent four decades leading the now legendary Oregon-based manufacturer of bullets, cartridge cases, ammunition, firearms, and suppressors. The Chairman of the company that bears his family name passed in September, at the age of 79.

Sam Paredes – A formidable defender of the Constitution and 2A legend, Paredes dedicated 40 years of his life to Gun Owners of California– the oldest pro-gun political action committee in the country– and was a longtime board member of Gun Owners of America and the Gun Owners Foundation. He passed in August, aged 68, and was a friend and mentor to many in the fight for gun rights in the country.

Yevgeni Petrov – Perhaps the best known Russian skeet shooter, having earned a Gold in the 1968 Summer Olympics and a Silver in the 1972 games, passed in Moscow in November at the age of 87. He was a six-time world champion and coached the Russian clay team at the 1992 Olympics.

Athos Pisoni – Brazilian sports shooter who won gold in skeet in the 1975 Pan Am Games and represented his country at the 1976 Summer Olympics. He passed in February, aged 87.

Olegario Vázquez Rana – Renowned Spanish-born Mexican competitive shooter who competed in every Olympics from 1964 to 1976 and world championships from 1966 to 1979, setting numerous world records. Among other offices, he served as President of the International Shooting Sport Federation (ISSF) for over 30 years. He died in March, aged 89.

Hans Kjeld Rasmussen – Danish sport shooter and Olympic champion who won the gold in skeet at the 1980 Summer Olympics in Moscow. Rasmussen died in February, aged 70.

Phil Robertson – The professional waterfowler, inventor, and outspoken “Duck Commander” founder passed away in May, aged 79.

Michael Sabbeth – The Denver-based lawyer and lecturer wrote several books as well as numerous articles on hunting and shooting, with his work appearing in “Safari Magazine,” “The Double Gun Journal,” “Sporting Classics,” and “Claying Shooting USA,” among others. His blog, “The Honorable Hunter,” endures. He passed in November, aged 78.

Alan Simpson – The Wyoming politician and longtime Senate Republican Whip and Army veteran also served on the Buffalo Bill Center of the West’s Board of Trustees for over 50 years and was instrumental in bringing the Winchester Collection to Cody and helping build the Center into the “Smithsonian of the West.” He passed in March, aged 93.

John Taffin – Authored five books and over 500 published articles in the pages of “Guns,” “Gun Digest,” “Sixgunner,” “Shoot!” and “American Handgunner,” going back to 1967, while he clocked in on his day job as a math teacher. The legend, when it came to six-guns and cowboy action shooting, passed in March, aged 85.

Martin Tuason – The President and CEO of Armscor and Rock Island Armory, Tuason passed in November, aged 51, after leading the companies since 2012. Besides expanding the company’s footprint around the globe, he will also be remembered as the “T” in the innovative .22 TCM cartridge.

Ed Williams – After service in the U.S. Navy, Williams spent a career as a speech teacher at LA City College before moving into being a character actor and comedian in the 1980s, starring in “Police Squad!” and the “Naked Gun” franchise, among others. He died in October at the age of 98.

Going past these esteemed members of the firearms community at large, we also note the closing of a number of gun companies, including Anderson Manufacturing, DelTon, Kalashnikov USA, Pioneer Arms, and SCCY.

And so, we remember.

HK416A8 in Der Haus: German Army Issues First Heckler & Koch G95 Rifles

The German Bundeswehr recently issued the first of at least 122,000 dirty mustard-toned HK416A8 rifles to army infantrymen– and more guns are on the way.

Heckler & Koch has had a lock on German infantry rifles going back to the 7.62 NATO Gewehr 3 (G3), which was adopted in 1959 and is still in limited service. The newly adopted System Sturmgewehr G95A1 in 5.56 NATO is replacing the futuristic-looking G36 in the same caliber, which in turn has been supplementing the G3 since 1996.

HK416A8, Germany’s new standard issue rifle, type classified as the G95. (Photo: Bundeswehr)

The first of the new rifles was issued at Grafe to troops of Panzergrenadier Battalion 122 (PzGrenBtl 122), a “tip of the spear” unit garrisoned in Oberviechtach, Bavaria, on the Czech border (cue the comic rimshot).

In Grafenwöhr, the Deputy Inspector of the Army, Lieutenant General Heico Hübner (left), together with Vice Admiral Carsten Stawitzki from the Ministry of Defense, presented the first new G95 rifles to the troops. (Photo: Bundeswehr)

It appears that all of the issued rifles recently shown off are the shorter G95KA1 variant, with the “K” being “kurz” or short, as it has a 14-inch barrel. (Photo: Bundeswehr) (Official caption: In Grafenwöhr wurde das neue Sturmgewehr der Bundeswehr, das G95 A1, an das Panzergrenadierbataillon 122 aus Oberviechtach feierlich übergeben am 4. Dezember 2025.)

The G95, adopted in 2021, will be fielded in both the standard 16-inch G95A1 and shorter G95KA1, both of which are lighter and shorter than the G36 they are replacing. The Elcan Specter DR 1-4x is the companion day optic of record. (Photo: Bundeswehr) (Official caption: In Grafenwöhr wurde das neue Sturmgewehr der Bundeswehr, das G95 A1 an das Panzergrenadierbatallion 122 aus Oberviechtach feierlich übergeben am 4. Dezember 2025.)

The G95, as with the HK416 in general, uses a robust, AR-18 style short-stroke gas piston system rather than the more traditional AR-15 direct gas impingement. (Photos: Bundeswehr)

It uses STANAG 4694 rails with M-LOK accessory slots and has an adjustable gas block. Note the full-length top Pic rail

Unlike the G36, the G95, in all Bundeswehr variants, will no longer be black, but greenish-brown, a colorway that has been described by some as “ekelhaftgelb” (disgusting yellow). The reason: black has a higher infrared signature and is therefore easier to detect. (Photo: Bundeswehr)

Das Senfgewehr! (Photo: Bundeswehr)

The Budget Committee of the Bundestag, Germany’s parliament, last week approved the purchase of more G95 series rifles, complete with optics and lights. The country, with an ever-more aggressive Russia to the East, is looking to up its military spending and is even flirting with the prospect of returning to peacetime conscription.

First selected by the Bundeswehr in 2014 in its A5 variant for use as the G28 designated marksman rifle, the country also fields the HK416A7 as the standard G95 (no A1), which has been in use with Germany’s special operations units since at least 2018.

The above shows a German KSK commando with a “50 Shades of FDE” HK416A7/G95 outfitted with an EoTech XPS HWS system and magnifier. (Photo: Bundeswehr)

The German-based Dexheimer channel earlier this year went on a visit to HK’s factory in Oberndorf to get the tour and a deep dive background on the G95. Even if you don’t speak German, you can auto-dub it in English, although you don’t really need to.

Mossberg Lands $11 Million Army Contract for M590A1 Shotguns

The military’s nearly 40-year love affair with the Mossberg 590 pump-action 12 gauge has no end in sight.

The oldest family-owned firearms manufacturer in America announced last week that the Army has awarded it a contract valued at approximately $11.6 million for additional Mossberg 590A1 shotguns. It is unclear if the award is an extension of the $19 million maximum value contract for 17-inch M590s issued in September, but either way, the Army is getting a lot more 12-gauge Mossys.

The M590 is based on the company’s legendary M500 platform, but features a heavy-walled barrel, metal trigger guard and safety, a clean-out magazine tube, and a thick Parkerized or Marinecote finish. Numerous stock, forend, and barrel length options exist, as well as the always popular heat shield and bayonet lug.

A Mossberg 590M on display at the U.S. Army’s National Infantry Museum located at Fort Benning, Georgia. (Photo: Chris Eger/Guns.com)

The M590 series famously withstood the military’s grueling MIL-SPEC 3443E testing protocol for riot-type shotguns, which included running 3,000 shells with two or fewer malfunctions. As TFBTV’s James Reeves has extensively documented with his 500-round shotgun burndown series, that’s a heck of a standard, and few scattergatts can meet it.

A well-used 30-year-old Mossberg 590M that survived Hurricane Katrina and is still kicking. This thing can’t be killed. (Photo: Chris Eger/Guns.com)

The Army has used shotguns since before World War I. As noted by Canfield, the first Army contract for the M500 series was issued in 1979 for guns with oiled wood furniture, a standard which soon shifted to synthetic stocks.

The first contract for the updated 590s with a heatshield and bayonet lug was issued in 1987 and, since then, all branches of the U.S. military, as well as the Coast Guard, have ordered the gun at one time or another for tasks including security, EPW control, EOD use, and in door breeching with barrel lengths varying between 14 and 20 inches.

The guns have seen frontline service in Panama, Desert Storm, and during the GWOT era in Iraq and Afghanistan.

Trench Grenade, a GunTuber who is an active duty Army infantry instructor in his day job, last week did a 500-round burn down with the M590, further underlining it as the people’s champ.

A Deep Dive on the New Glock Gen 6 Models (G17, G19, and G45)

We traveled to the GlockMothership in Georgia to get the scoop on the company’s new Sixth Generation guns and have all the juicy information.

Summary: The new Gen 6 Glocks look much like the previous five generations (even fitting most existing holsters), but address a lot of issues that people have asked for on an upgrade. The guns are direct-milled optics-ready, have a new flat-faced trigger while keeping many of the same internals, the ergos are much improved, and they still accept legacy magazines and sights. All for the same asking price as Gen 5 MOS models. Rumors of a modular fire control system are false.

Now let’s get into it

The new Gen 6s at first will be all 9mm, with the G19, G17, and G45 at launch and the G49 available overseas. We are advised that other models are inbound.

Glock Gen 6
The Gen 6 Glock G19, G45, and G17. The additions to the ergos are obvious, including the trigger shoe, palmswell, texturing, and thumb pad/gas pedal. (Photo: Chris Eger/Guns.com)
Glock Gen 6
A closer look at the production Gen 6 G17. (Photo: Chris Eger/Guns.com)
Glock Gen 6
And note the ambi slide catch lever. (Photo: Chris Eger/Guns.com)

The Glock generations from 1 through 6 look very (very) similar when stacked side-by-side, and there is a reason for that: consistency. Anyone who had a Gen 1 in 1986 could be transported to 2026 and pick up a brand-new Gen 6 and figure it out in about three seconds.

Glock generations
The Six Glock generations side-by-side (Photo: Glock)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
The Glock Gen 5 G19 compared to a Glock Gen 6 G17. Note that the legacy model has less texture, a curved trigger, and a dual spring recoil assembly. (Photo: Chris Eger/Guns.com)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
A look at the slides compared. The extractor channel is now sealed to prevent folks from oozing excess thread lock into their slide internals when mounting optics. (Photo: Chris Eger/Guns.com)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
The frames are compared at the action, with the Gen 6 on the left and Gen 5 on the right. The layout is the same, but the geometry is a little bit different. (Photo: Chris Eger/Guns.com)
The Glock Gen 5 G19 compared to a Glock Gen 6 G17
Backplates compared. (Photo: Chris Eger/Guns.com)

The Gen6 may look remarkably like previous generations, by design, but it is quite different when it comes to ergonomics, optics mounting, and parts. For instance, it has a new trigger, a new slide, and mostly new internals.

Legacy parts that will work besides the magazines, backstraps, and sights are the locking block, mag release, firing pin and spring, slide lock/spring, trigger pin/housing, trigger bar, recoil spring assembly, and connector. Almost everything else is Gen 6 only.

The differences are so substantial that Glock’s Training division told us that, moving forward, the traditional Glock Armorer’s Course, which has long been one day covering all generations, will now just cover the Gen 5s and 6s, with a separate course dedicated to “Classic” Glocks.

Glock Gen 6 extractor package
The downsized extractor package (extractor pressure piece, extractor frame, extractor package spring) is completely different but can still be removed with just the standard Glock armorer tool. It was redesigned to allow more space for the Optics Ready System, and the extractor channel is now sealed off. (Photo: Chris Eger/Guns.com)
On the topic of user comfort, the new palmswell comes from scanning hundreds of Glock users to produce a cross median that provides a more optimal fit. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The new RTF6 grip texture combines the old-school RTF2 substrate with the RTF 4 polymids to create something altogether different. Further, the grip texture has been expanded to reach higher on the frame and onto the thumb rest to give the user more grip purchase opportunities. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The enlarged, frame-mounted beaver tail encourages a higher grip while still avoiding slide bite. It ships with two interchangeable backstraps (2mm and 3mm) and is compatible with Gen 5 straps. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The flat-face trigger has an advertised pull weight of 5.5 pounds, and we noted it to have a good reset. It keeps the traditional trio of Glock “Safe Action” internal safeties, including the trigger shoe pivot, firing pin safety, and drop safety. (Photo: Chris Eger/Guns.com)

All standard frame Gen6 Glocks will be optics-ready, and it isn’t the old MOS system (which is gone) or the new A-Cut COA system. It uses a plate system on a slide that has been redesigned so that the optic bed sits deeper into the slide for a lower height over the bore axis.

Glock Gen 6
The 3mm plate is polymer and is advertised as working as something of a shock-absorber/crush washer that fits in a 3mm recess, while the optic screws directly into the slide, which has four screw holes, sort of a direct-mount with a twist, if you will. (Photo: Glock)
Glock Gen 6
The result is that the optics sit flat while having the benefit of a polymer buffer of sorts. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The ambi slide stop lever has been redesigned and now has a larger border around it molded on the frame to prevent accidental activation. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The undercut trigger guard (finally, Glock) helps with a higher grip while keeping enough “beef” so that you don’t risk frame cracking on duty holsters. (Photo: Chris Eger/Guns.com)
Glock Gen 6
It has deeper slide serrations, including front slide serrations, which have not been standard on legacy models. (Photo: Chris Eger/Guns.com)
Glock Gen 6
It uses a gently flared magwell and accepts Gen 5 magazines. (Photo: Chris Eger/Guns.com)
Glock Gen 6
Glock has finally added a thumb rest/gas pedal/thumb pad on each side of the gun. To make sure it would still fit legacy holsters, the frame internals on this section have been redesigned to allow the extra texture without making the pistol wider at this point. (Photo: Chris Eger/Guns.com)
Glock Gen 6
Looking at reliability, Glock— which has been working on the Gen 6 since 2022— has had test guns survive 40,000 rounds of mixed ammo, aced salt fog/mud/sand tests, and met all its other standard testing protocols. We fired all three production models on the range for a few hundred rounds and experienced no issues. (Photo: Chris Eger/Guns.com)
Glock Gen 6
The Gen 6s will start shipping to be “on dealer shelves” for a Jan. 20, 2026, official launch, with three magazines and three optics plates, as well as all the standard Glock stuff. (Photo: Glock)

The MSRP on the new Gen 6 Glock models is $745, which is the same cataloged price as the Gen 5 MOS models.

We have review models inbound, so expect more details in the coming weeks.

« Older Entries Recent Entries »