Tag Archives: military classics

We found out why the Hotchkiss Universal did not have universal appeal

The manufacturing firm established by American gunsmith Benjamin B. Hotchkiss in France in the 1860s saw nearly a century of success in making everything from revolving cannons (think 47mm Gatling guns) to light machine guns, automobiles, and even tanks. By the late 1940s, however, the firm was barely hanging on and developed at least four new submachine gun models with tubular receivers to court military and police sales.

The weirdest of these was the Model 010, or “Type Universal.”

To make a gun as compact as possible, almost every component of the Universal was designed to fold, collapse, or telescope. The sheet metal buttstock folds completely under the gun. To make the folded weapon as svelte as could be, both the magazine well and the hollow pistol grip pivot forward. The 10.79-inch rifled barrel slides back a few inches into the receiver through a long trunnion to further abbreviate the firearm.

 

Hotchkiss Universal
With all this done and the stock folded, the Universal is only 17.3 inches long. Compared to its contemporaries – the American M3 Grease Gun and the Soviet PPS-43, which were both 23 inches long with their stocks collapsed – the Universal saves a few inches. (Photo: Chris Eger/Guns.com)
Hotchkiss Universal
When the stock unfolds and the barrel is telescoped forward, the sub gun’s overall length is 30.67 inches, the same length as a STEN gun. It weighs 7.5 pounds and loads with a box magazine full of 32 rounds of 9mm. It is selective fire for single shots or a zippy 650 rounds per minute full-auto cyclic rate. (Photo: Chris Eger/Guns.com)
Hotchkiss Universal
However, the gun proved unpopular, and besides some local use in Indochina with French colonial forces and some limited sales overseas (to Venezuela, for example), it faded into history. 
French paratroopers M1 carbines
It seemed French airmobile and parachute troops, a demographic that would seem an ideal user of the folding Hotchkiss, preferred GI surplus .30 caliber M1A1 Carbines, which weighed about 6 pounds and would compact to 25 inches when folded but were much simpler to use. (Photos: French military archives) 

Our Hotchkiss experience at Battlefield Vegas had a learning curve. To be more to the point, it was needlessly complicated and had terrible ergonomics.

It shot OK, but, after spending some time with it, we could easily tell why the Universal did not have a universal appeal.

More, including the transformation and shooting footage, in my column at Guns.com. 

Getting some range time with the Owen

While in town for SHOT Show earlier this year, we had a chance to swing by and visit our old friends at Battlefield Vegas. They gratefully allowed us a chance to tour their vault and pick a few guns to profile and shoot.

 

Battlefield Vegas
Choices, choices…(Photo: Chris Eger/Guns.com)
Battlefield Vegas
You know us, we like the rare ones. 
Then we saw this baby, sandwiched between a Rattler and a UZI-SD. 
This beautiful Mk. 1 Owen may look a little funky because it is a little funky, but we just had to check it out. 
Keep in mind these were built for an all-up per-unit cost of about $30, so the furniture isn’t nice on this simple “toob” gun. In many respects, it was a forerunner of such simple modern SMGs as the Sterling and Beretta PMX. Note the charging handle is to the rear of the gun and comes super close to the face while reciprocating. 
Top fed with a 33-round 9mm magazine, it has a very peculiar feel to it.
The ejection port is on the bottom. 
One of the more curious aspects of the Owen is that the front sight post is off-center, canted to the right, as the top sight line is ruined by the magazine. 

More on how the range went, along with some background on the gun, in my column at Guns.com.

Shooting Britain’s Last Mag-Fed LMG

In the early 1980s – just after the Falklands War – the British government moved to ditch the combat-proven inch-pattern semi-auto-only FN FAL (dubbed the L1A1) and the 7.62 NATO-chambered Bren gun (L4A1) with a new and radically different platform, the SA80 family.

Adopted in 1985 was a bull-pupped Enfield select-fire rifle in 5.56 NATO that accepted standard 30-round magazines. Fielded with the 4x fixed-power SUSAT (Sight Unit Small Arms, Trilux) optic, this new series of guns was designated the L85 rifle – with a 20-inch barrel – to replace the L1A1.

Whereas 350,000 SA80 pattern firearms of all types were made, the lion share were L85A1s, most later updated to L85A2 standard by HK, and finally to L85A3– the current standard. Besides the standard rifles, there was a comparative handful (2,500) of shortened L22A1/A2 Carbines for use by aircrew and the like produced. Training aids in the form of the L103A2 Drill Purpose, L98 Cadet Rifle, and L402A1 0.22 Small Bore Rifle were also made.

One of the more eclectic variants is the comparatively rare (22,000 made) L86 Light Support Weapon. Designed to replace the 7.62 Bren L4A1 in squad service, it had a longer 24-inch barrel, a rear grip, and a folding bipod.

The SUSAT-equipped L86 LSW (top) and the L85 rifle, are compared. Note the longer barrel with a shorter handguard and outrigger support, the rear grip, and the folding bipod on the LSW. (Graphic: MoD)

Among other features are a folding butt strap that flips up to assist with stability. (Graphic: MoD)

Now withdrawn from British service and replaced by a proper squad automatic weapon, the belt-fed FN Minimi, we recently were able to go hands-on with a retired (but still functional) L86 at BFV earlier this year.

The L86 is a beefy weapon, hitting the scales at 16 pounds with the SUSAT installed and a 30-round magazine inserted. However, it is still “light” compared to the L4A1 Bren it replaced, which hit the scales at 19 pounds, unloaded. Plus, the L86 is only a little over 35 inches long, or about the length of a Mini-14!

The L86 is probably one of the oddest Enfields ever produced.

The chunky L9A1 SUSAT, which was cutting-edge when introduced in the early 1980s, has since been phased out by the Trijicon ACOG and the Elcan Specter in British service. Note the fixed iron backup sights located atop the sight body. The SUSAT uses an illuminated inverted aiming point that looks something like the Washington Monument.

More after the jump in my column at Guns.com. 

Classic Walther Burp Gun Spotted in the Wild

The Portuguese Navy’s Marine Corps has deployed a 170-strong reinforced company (about a quarter of the service’s strength) to the Baltics. Dubbed the Força de Fuzileiros Lituânia (FFZ LTU) it is on a roughly three-month mission under the auspices of NATO and is the largest deployment of the Corpo de Fuzileiros since Portugal evacuated its African colonies more than 50 years ago. Notably, it includes two UAV elements.

The Portuguese Marines are also sort of old-school, in many ways being stuck in the 1960s-70s when it comes to small arms, still using HK G3 battle rifles, and Walther MP subguns. They only recently retired the P-1 (P-38) pistol in favor of the Glock 17.

Everyone knows the Walther brand, and for good reason. The company makes great guns that are often extremely innovative. The PP/PPK, P-38, P-99, PPQ, PDP, the OSP, and Olympia – the list goes on. However, Walther only made one production submachine gun: the Maschinenpistole, or MP.

Designed in the late 1950s and entering production around 1963, the MP is a blowback action 9mm select-fire SMG with a tubular receiver that fires from an open bolt. It beat the much better-known Heckler & Koch MP5 to production by a few years and was made in two different variations: the MP Lang (Long), or MPL, and the MP Kurz (Short), or MPK.

The difference in size between the two was negligible. The more full-sized MPL ran a 10.2-inch barrel for an overall length of 29.4 inches with the side-folding wire stock extended, whereas the MPK went about 3.5 inches shorter with a 6.8-inch barrel.

Seen at Walther’s in-house museum in Ulm last year…

Although well-made, the MP never really caught on. Its only European customer, besides some German police units as the MP4 (they made several on-camera appearances during the Munich Olympics in 1972), was the Portuguese Navy as seen above

Overseas, it was bought by a few third-world users and the U.S. Army, picked for use by the elite Delta Force commandos in the 1970s and the secretive Detachment A “stay behind” Special Forces unit in West Berlin.

Whereas the MP5 is a bit of a race car that needs special tools for in-depth maintenance, the MP is made simply of metal stampings. For instance, the barrel on the Walther can be swapped out by a user in the field with no tools. Plus, its 550-round cyclic rate, slower than that of the HK, was closer to that used by the M3 Grease Gun and earlier MP38/40, allowing a more familiar learning curve to those already used to those platforms. Little wonder it was adopted by the early U.S. Tier 1 counter-terror operators when Delta Force was first stood up. (Photos: U.S. Army, National Archives, Springfield Armory National Historic Site)

We recently got to shoot one earlier this year and can see why Delta dug it. 

Behold, the MPK

It is ambi and is set up kind of funny. The safety (Sicher=safe) is to the rear of the grip, full-auto (Dauerfeuer= continuous fire) straight down, and semi-auto (Einzelfeuer=single fire ) with the switch rotated forward toward the magazine well. The HK MP5 has a similar S/E/F marked switch for Sicher-Einzelfeuer-Feuerstoss

Jan 1944: Two millionth SA M1 Garand is Born

With World War II far from over, the 2 millionth M1 Garand Rifle manufactured at the U.S. Army’s Springfield Armory was crafted some eight decades ago this month. 

The below image, from January 1944, shows U.S. Army Col. George A. Woody observing Mr. Norbert R. Bonneville, who is inspecting U.S. Rifle M1 .30 caliber, Springfield Armory SN# 2000000. On the table is a framed portrait of Jean Cantius Garand, better known as John C. Garand, the designer of the rifle whose action he patented in 1932 after a decade of development. 

(Springfield Armory National Historic Site Photo 4326-SA.A.1)

At this point in the war, Eisenhower of course was busy planning the liberation of German-occupied France by landing Allied troops along the Normandy Coast when the weather broke in June, while in the Pacific the liberation of the Japanese-occupied Philippines was being planned by MacArthur along a similar timeline. 

For a deeper dive into the above photo, Col. Woody was the superintendent of Springfield Armory from Aug. 1943 to Aug. 1944, and his sought-after “G.A.W.” inspector stamp appears on correct M1 Garands made at the armory during that period. Sadly, the photo is one of the last of the colonel. Woody, a career Army Ordnance officer, and Aggie (Class of ’17), became ill in the summer of 1944 and was relieved at the armory by Brig. Gen. Norman F. Ramsey in October. Woody, suffering from a rare liver disease, spent his remaining days in Walter Reed Hospital where he passed away in November. He is buried at Arlington.

As for the younger man in the photo, Norbert Bonneville, who at the time lived in South Hadley, Massachusetts, was working the overnight “MacArthur” shift at the armory when the 2 millionth Springfield M1 receiver came down the line and the operator of an automatic numbering machine had the honor of stamping the serial at 2 a.m. “to the cheers of assembled workers who gathered to witness a historic event,” as chronicled by the New England Minute Man

As further described by the Minute Man

Final assembly into a completed weapon came later. In the stocking shop selection was made of a piece of walnut with a particularly fine grain. In finishing the stock, master craftsman at the armory lavished upon it all their skill. When the rifle was assembled, they put on a polish with the luster of an opal. A walnut mount was made for the gun and it was placed in the office of the commanding officer, later to be removed to the Springfield Armory museum to take its honored place with other historic arms that have been manufactured through the years.

Presented to Maj. Gen. Thomas J. Hayes after the war in 1946, it eventually made its way back to the Springfield Armory Museum where it remains today as catalog # SPAR 913. The Armory’s collection also contains several other key serial numbered guns, including SN# 1 manufactured in 1937, and SN# 100000, completed in December 1940 at a cost of $67.09.

But what about Springfield SN# 1000000? That one, completed in November 1942, was put back in storage until Mr. Garand retired in 1953 and was presented to him as a gift. It made it back to the museum on loan in 1994 and was later sold by its owner at auction in 2018 for $287,000.  

Mr. Garand, seen with an M1 on the Springfield assembly line in 1940, and sometime later with what looks to be the millionth rifle.

In all, Springfield Armory manufactured over 3 million Garands through 1945 when WWII ended, and, as noted by firearms historian Scott Duff, its production peaked in January 1944 – the period the 2 millionth gun was made – “with 122,001 M1s produced that month. This translated to 3,936 rifles per day or 164 rifles per hour.”

Springfield was the last government armory in the Garand-making business, and their final M1 .30-caliber rifles came off the line in May 1957, at which point it had been replaced in front-line service by the M14 rifle. By then, the serial number range was in the region of 6,099,905.

A graying and smiling Mr. Garand, then several years in retirement, was on hand for that moment as well. 

Official caption: “Group of men surround the last M1 .30-caliber rifles off the production line. Col. Hurlbut stands on the left. Lt. Col. Septfonds stands second from left. John C. Garand stands second from right and he holds the last rifle.” (Springfield Armory National Historic Site Photo 12808-SA.1)

Ping! Happy 90th Birthday, Garand Patent

On 27 December 1932, the U.S. Patent Office granted Case File No. 1,892,141, for a “Semi-Automatic Rifle” to one John C. Garand, aged 44 of Massachusetts. The rest is history.

The 75-page patent application filled out and filed by Mr. Garand himself is so historical that it is fully digitized in the U.S. National Archives.

Filed in April 1930, it was endorsed by the Secretary of War with W.N. Roach, the Army’s Chief of the Patent Branch of the Ordnance Department, signing the drawing sheets and application forms as Garand’s attorney of record. His address was simply listed as Springfield Armory.

The petition, signed by Garand. (Photo: National Archives)

Among the most captivating pieces of the application were several pages of diagrams, all of which are suitable for framing in any man cave.