The big takeaway on this model is that it takes a well-liked gun that has been around for almost a decade and gives it a series of small updates, as well as an integrated single-port compensator.
The compact, semi-automatic, striker-fired P-10 C 9mm was first introduced in 2017 and has continued to evolve over the past decade. Featuring a 15+1 magazine capacity, its 4-inch cold hammer-forged barrel, in addition to its new compensator, now sports a heavier profile to help keep the gun flat. The sights have been brought over from the new Nocturne P-09 series. The optics footprint uses a plate system.
The P-10 C Ported has an overall length of 7.3 inches. Note the large port on the 4-inch heavy barrel, directed out the top of the slide, which creates a setback on the front sight. (All photos: Chris Eger/Guns.com)
The unloaded weight is 26.8 ounces.
The pistol is roughly the same size as the G19.
And compared to the company’s recently introduced P-09C Nocturne.
The short answer to this one is that the CZ P-10 C Ported is one of the most reliable pistols we have evaluated. Over the course of about 800 mixed rounds across several ammo types and loads, we did not have a single stoppage.
We didn’t even suffer from a slide failing to lock back on an empty mag. And that is on a gun right out of the box with no additional lube or prep.
The P-10 series has a reputation as one of the most durable and reliable pistols on the market. One of our favorite exports from Czechia. We feel Jan Zizka would approve.
The majority of what we fed the P-10 C was Remington 115-grain FMJ Range 1,145 fps bulk pack (500 rounds loose-packed inside a bag in a cardboard box).
Swapping it up, other loads included Federal’s red-tipped 150-grain Syntech Action Pistol flat-nosed rounds, CCI Blazer 115-grain FMJ, Winchester 124-grain NATO ball, and Federal’s 147-grain Gold Medal Action Pistol.
After chugging through about 700 rounds of range loads, we switched to self-defense rounds and found the P-10 C to run Speer 124-grain Gold Dot, Federal 124-grain Punch, and 135-grain Hydra Shok Deep JHPs without issue.
Besides enduring use with the Czech military and others, the German Army recently tapped CZ to provide as many as 186,000 P-10Cs to replace that country’s P8 (Heckler & Koch USP) series pistol.
Alabama-based Kimber looks to mine more gold from its popular new 2K11 double-stack series pistols by debuting five new, and more carry-oriented, Pro models.
The company debuted the 2K11 line in three models and two calibers (9mm and .45 ACP) last November with an aluminum alloy grip module over an SST steel sub-frame. The slide is made of stainless steel, featuring an external extractor, front and rear slide serrations, and a factory optics cut in the RMR footprint.
Running TAG Precision FiberLok 2 front sights with a suppressor-height serrated rear sight, under the hood is a beast of a deep-crowned, fluted bull barrel. Buyers also got a great GT aluminum trigger, ambi safety levers, an innovative tool-less guide rod/spring assembly, and common (2011 pattern) magazine compatibility.
The standard 2K11 is an elegant, if full-sized, tack driver that is slicker than an oyster with a head cold. (Photo: Chris Eger/Guns.com)
Since then, Kimber has added a Stainless model featuring the Carbon Fiber/Kevlar-infused grip module from MJD Solutions, the 2K11 Independence, and the Eclipse.
Now, the company has answered demand for a more compact entry to the 2K11 line in a big way with five new 9mm models, all sporting a 4.25-inch fluted and crowned barrel while offering 19+1 round Checkmate UHD magazines. Two of the new models will also be available in .45 ACP format, shipping with one flush 11+1 round mag and one extended 13+1.
All share many of the more top-shelf 2K11 features, such as its toolless guide rod, external extractor, disconnector ramp, and zero-creep GT Trigger that has a 3 to 4-pound break. All are optics-ready and ship with an RMR plate with RMSc, DPP, ACRO, and 509T available. As with the rest of the line, these guns are constructed, not assembled, by a single technician, from the ground up.
Let’s talk models.
These five finishes available are Coyote, Eclipse, Minotaur, Royal, and Stainless. Of these, the Coyote and Minotaur feature aluminum grip modules, while the other three use MJD carbon fiber and Kevlar molded grips, with the latter shaving off about 6 ounces in weight.
The Coyote. Note its Stan Chen magwell and Kevlar carbon fiber grips on an aluminum grip module. Hitting the scales at 40.9 ounces empty, it is available in 9mm ($2,699) and .45ACP ($2,799). Note the Coyote PVD slide and black DLC barrel
The Eclipse with its stainless slide and black DLC barrel. Offered only in 9mm, it is lighter at 35 ounces due to its MJD carbon fiber grip module. Price is $2,345.
The Minotaur features a distressed Sandstone Cerakote finish over its stainless slide and frame with a black DLC finished barrel. Available in 9mm, it has an ask of $2,575.
The aristocratic Royal has a bronze PVD finish and an MJD composite grip module and magwell. It is available in 9mm for $2,499 or .45ACP for $2,599.
Finally, the aptly named Stainless has a Kimpro Granite finish and Kevlar carbon fiber grips. In effect, it is the most attainable 2K11 Pro, priced at $2,245. It is only offered in 9mm.
We have one of these inbound for a review, so expect to see more on these beautiful – and functional – new pistols in the coming weeks.
With 1775 some 250 years in the rearview, Auto-Ordnance came to the recent NRA Annual Meetings in Atlanta with a trio of special new USGI .45s.
This year, besides the semiquincentennial of the start of the Revolutionary War, the Army will celebrate its official 250th birthday on June 14, followed by the Navy on October 13 and the Marines on November 10. To honor the services, Auto-Ordnance has three 250th Armed Forces Anniversary 1911s on tap.
Based on the company’s standard 80-series Government format M1911A1, complete with a GI profile slide, fixed sights, and curved mainspring housing, each variant will sport a dedicated Cerakote livery applied by Texas-based Altered Arsenal.
In each variant, the left slide will carry a “250 years of Service, 1775 – 2025” crest surrounded by laurel leaf etching. (All photos: Chris Eger/Guns.com)
Each pistol will have custom styling on the top of the slides that emulates the “gig line” of the respective services’ dress uniform, complete with buttons and belt buckle.
The Army variant (1911BKOC15) carries an OD Green Cerakote finish with Silver, Black, and Gold accents. The phrase “May God have mercy on my enemies because I won’t” is a well-known quote attributed to General George S. Patton.
The Navy variant (1911BKOC16) has a White, Blue, Black, and Gold Cerakote finish. The quote, “I have not yet begun to fight!” is famously attributed to Captain John Paul Jones during the Battle of Flamborough Head in 1779.
The Marine variant (1911BKOC17) has a Blue, Black, Silver, Red, and Gold Cerakote finish. The phrase “Retreat, hell – we just got here” is a famous quote attributed to Captain Lloyd W. Williams of the 5th Marines during the Battle of Belleau Wood in World War I.
These 250th Armed Forces Anniversary 1911s will ship soon with one standard 7-round magazine included and have an MSRP of $1,399.
Glock released the slimline G48 a few years back, and I kind of passed on it, but when equipped with the new Aimpoint COA series enclosed red dot, it has changed my mind.
In all honesty, the G48 was a snoozer for me when it first came out. Don’t get me wrong, I had a chance to shoot one on several occasions, but I never felt a spark.
However, the new COA-equipped model, being optic-ready with decent steel sights, and sold with an installed American Aimpoint enclosed red dot on an interesting direct cut footprint, I felt the spark. Plus, the price point balances out to less than a G48 MOS with an aftermarket Chinese Holosun that uses a plate.
The COA has a wide field of view, and an exceptionally low deck that proves quick to “scoop in” the dot. The A-cut is simple in execution with fewer things to break than in other mounting systems.
When it comes to throwing rocks, the worst thing I can point out on the G48 COA combo is that the footprint and sights are limited to what you get in the box. Currently, there is no other optic that uses the A-cut footprint, and you cannot change out the rear sight for anything else. That may change but for right now you are painted into a corner.
Going past that, I think I may have a new EDC. Let me run some more rounds through it and circle back to you on that.
Rossi has trimmed down its R95 Triple Black lever-action rifle into a much more packable pistol variant for 2025.
The company debuted its new R95 Triple Black Pistol, or TBP, to the recent NRA Annual Meeting at Atlanta, and we were able to lay hands on it for a closer look. Much like its rifle-length older brother, the TBP is clad in a black Cerakote-coated finish with matching black furniture. A paracord-wrapped medium loop lever and a top-mounted Picatinny optics rail are also features that are carried over from the original.
Specific to the TBP is its abbreviation, shipping with suppressor-ready 13.25-inch barrels and a pistol grip, allowing the lever-action mare’s leg an overall length of just under two feet. Weight is 5.5 pounds, unloaded. While Rossi had the .357 Magnum variant on hand in Atlanta, the TBP will also be offered in .454 Casull, .45-70 Govt, and .44 Mag for those looking for something a little spicier.
The side-loading Rossi TBP has a paracord-wrapped medium lever, which splits the difference between big loops and standard rectangular slot-style levers. (Photo: Chris Eger/Guns.com)
The pistols have threaded muzzles with the .357 at NRAAM fitted with a JK Armament can. All four caliber options run a four-round underbarrel magazine tube. (Photo: Chris Eger/Guns.com)
Note the top-mounted Picatinny optics rail. Other features include a cross-bolt manual safety and two sling swivel studs. (Photo: Chris Eger/Guns.com)
With an overall length of just 23.5 inches, the Rossi TBP line is more easily stowed than a full-length carbine or rifle. (Photos: Rossi)
Rossi has expanded its Brawler series of modern break-action single-shot pistols for the better with new models to include variants in .300 Blackout and 5.56 NATO.
The company in 2023 debuted the $300 Brawler line with a dual-caliber .410 bore/.45 Colt offering outfitted with a single-action trigger and a cross-bolt thumb safety. It’s simple. Just load the chamber, close it, cock the hammer, fire, and reload. Takes about five seconds to figure out.
Now, Rossi has upped the ante and was on hand at the recent NRA Annual Meetings in Atlanta with the new Brawlers, each carrying a more serious punch.
The Brawler in 300 BLK runs a 6-groove, 1:8 RH twist, 9-inch barrel and has an overall length of 14 inches. The 5.56 has a 1:7 twist with everything else being the same. Note the threaded barrel. (Photo: Chris Eger/Guns.com)
While the .45/.410 Brawler has a high blade front sight; the rifle caliber variants only run the integrated top Picatinny rail for optics. (Photo: Rossi)
The possibilities for such a pistol as a trail gun are obvious. Paired with a suppressor, it seems ideally suited as a Form 1 candidate to transform into an SBR running Rossi’s $59 LWC/Tuffy folding pistol grip stock.
Taurus came to the NRA Annual Meetings in Atlanta with a curious new (to the U.S. market) double-action/single-action .380 pistol.
The original Model 58 was introduced in 1988 as the 12-shot Model PT-58.
Thus:
Its more modern variant has been popular in Brazil for years and is now available on this side of the equator.
With a layout similar to the iconic Beretta Model 92 (PT 92/99 for Taurus), the handgun sports a 4-inch barrel inside an open slide that has a familiar feel in the hand despite its stubby 7.2-inch overall length. The full-sized grip contains a flush-fit 15-shot double-stack magazine.
The combination gives you a great feel and a decent magazine capacity.
With the sudden resurgence in double-stack .380s such as the Beretta 80X and assorted Turkish-made M84 clones like the MC-14, the time may be right for some more competition in the field.
The CZ Shadow 2 is one of the best guns of the century. Full stop.
The original Shadow line, an all-steel, large-capacity SA/DA pistol, was descended from the CZ 75 SP-01 and used successfully to pull down a first-place production division finish in the 2005 IPSC World Shoot. Given improved sights, a longer barrel, and better ergos, the Shadow 2 debuted in 2016, followed by an optics-ready model in 2020.
Today, it is used by two out of three of the top competitors in IPSC Production and Production Optics divisions, most notably by nine-time IPSC World Champ Eric Grauffe.
With Shadow 2 fans petitioning CZ for a slimmed-down version of the gun, the company introduced the Shadow 2 Compact in 2023, which cut weight with a forged 7075 aluminum frame and a 4-inch barrel. The magazine’s capacity is 15+1 with a flush-fit double-stack mag. Like the standard Shadow 2, the Compact ships with textured aluminum grips and a “butter smooth” trigger pull (single action 3.4 pounds; 10.3 for double action).
We shot the Shadow 2 and Shadow 2 Compact side by side while touring the CZ factory at the foothills of the Carpathians in Czechia last year and were thoroughly impressed with how they performed.
The Shadow 2 Compact, for all intents and purposes, is just a little brother to the more competition-oriented Shadow 2. It is smaller, lighter, and easier to carry, but retains the DA/SA with a manual safety. As it’s based on a competition gun, there’s no firing pin block plunger system, which can be a pucker factor for some on being drop-safe if carried with a round in the chamber.
With the Shadow 2 Compact’s safety question, folks were gun-shy, pardon the pun, about carrying it, especially concealed.
However, CZ has updated the design in the new Shadow 2 Carry, introduced this week. It retains everything folks loved about the Shadow 2 Compact but deletes the manual safety lever in favor of a simple de-cocking lever while adding a safety notch on the hammer and an automatic firing pin block.
I’ve been testing one that CZ sent me, and I have to admit, it is pretty sweet. I mean, it should be at $1,400…
Springfield Armory this week delivered a 9mm pistol variant of the Saint Victor to complement its PCC models. The company debuted the direct blowback-action Saint Victor 9mm carbine in late 2022 with a Melonite-coated 16-inch CMV 1:10 twist barrel, ambidextrous safety, nickel-boron-coated flat trigger, and a standard GI-style charging handle. In a departure from the widespread use of Glock double-stack mags for 9mm PCCs, the Victor carbine accepted 32-round Colt SMG stick mags– which are widely available.
Now, for 2025, Springfield is shrinking the platform down to an NFA-compliant pistol format with a 5.5-inch barrel inside a free-floating M-LOK handguard and outfitted with an SB Tactical SB-A3 stabilizing brace on an adjustable three-position receiver extension. Other standard features include a full-length top Picatinny rail, short-throw ambidextrous 45-degree thumb safety, a B5 Systems grip and trigger guard, and a SA muzzle drum on a threaded barrel.
Glock Ges.m.b.H. (not Glock US) has released a series of new olive green Hunter Edition pistols in Europe featuring steel sights, threaded barrels, and an option for an installed Aimpoint COA red dot.
The five models in the Hunter Edition are in 9mm (G45) and 10mm (G20) variants and appear timed to coincide with upcoming large overseas firearms trade shows such as Enforce Tac, IWA OutdoorClassics, and WBK International.
The three advertised G45 Hunters all bear extended metric pattern threaded barrels and options for Glock’s new 600-lumen Tactical Light II. There is also an A-Cut G45 Hunter with the new Aimpoint COA, or Glock’s more traditional MOS plate system.
We’ve got no information as to when or if these will ever make it to this side of the pond. However, similar models to these could likely filter out to the States – think about a possible rabbit in the hat for the NRA Annual Meeting in April.
