Tag Archives: Sentinel class cutter

Coast Guard picks up even more FRCs, go Glock

Posted on by 3 comments

If you have followed me here for even a minute, you know that I am a fan of the Coast Guard’s 154-foot Sentinel-class Fast Response Cutter program.

Sept 24, 2020: Coast Guard Fast Response Cutter Myrtle Hazard (WPC 1139) arrives in Guam, where four of her class will form a squadron in the U.S.’s most forward-deployed territory, so to speak. 

The $27 million-per-unit FRCs have a flank speed of 28 knots, state of the art C4ISR suite, a stern launch and recovery ramp for a 26-foot over-the-horizon interceptor cutter boat, and a combat suite that includes a remote-operated Mk38 25mm chain gun and four crew-served M2 .50 cals.

The addition of other light armaments, such as MK-60 quadruple BGM-176B Griffin B missile launchers, MK19 40mm automatic bloopers, and MANPADs, would be simple if needed, provided the Navy wanted to hand it over.

Based on the Dutch Damen Stan 4708 platform with some mods for U.S. use, Louisiana’s Bollinger Shipyards won a contract for the first unit, USCGC Bernard C. Webber (WPC-1101), in 2008 and has been plowing right along ever since.

Speaking of Bollinger, the yard just announced the USCG has exercised the contract option for another four craft, bringing the total number of hulls to 60, not an insignificant number.

It is thought the ultimate goal is to have 58 FRCs for domestic work– where they have proved exceedingly capable when operating in remote U.S. territories such as Guam, in the Caribbean, and in the Western Pacific– and six hulls for use in the Persian Gulf with the Coast Guard’s Patrol Forces Southwest Asia, a regular front-facing buffer force with the Iranian Revolutionary Guard.

Changing pistolas

Guardsman on patrol somewhere along the Atlantic coast shown in the new uniform of the U.S. Coast Guard Mounted Beach Patrol, 1943. Note the M1917 revolver holster  S&W Victory Model in .38 Special and Army-pattern tack 

While under the Treasury Department, from 1790 to 1968, the Revenue Marine/Revenue Cutter Service/Coast Guard most commonly relied on pistols for their day-to-day work in countering smugglers, pirates, and other assorted scoundrels. These guns usually came from commercial sources. In fact, the old Revenue Cutter Service was one of the first organizations to buy large numbers of Mr. Colt’s revolvers, long before they were popular.

By WWI, the Cuttermen started using more standard handguns in line with the Navy, switching to .45ACP revolvers and pistols, which they utilized until switching to Beretta M9s in the mid-1980s– becoming the first branch of the military to be issued with the new 9mm.

In 2006, with the Coast Guard transferred to Homeland Security, they went with the then-common pistol used by the Secret Service and Federal Protective Service (the old GSA Police with better funding)– the Sig Sauer P229R DAK in .40S&W.

Fast forward to 2020 and the USCG is now using Glocks, piggybacking off the recent CBP contract, rather than go with the Sig Sauer M17/M18 as used by the rest of the military. 

The Coast Guard is now using the Glock 19 Gen5 MOS in 9mm as their standard handgun

Say it with me: Alto Tu Barco!

There are now 40 154-foot patrol craft in the USCG

Posted on by 5 comments

The new Sentinel-class Fast Response Cutter (FRC) has been termed an operational “game-changer,” according to senior Coast Guard officials. Based on the Dutch Damen Stan 4708 platform with some mods for U.S. use, Louisiana’s Bollinger Shipyards won a contract for the first unit, USCGC Bernard C. Webber (WPC-1101), in 2008 and has been plowing right along ever since.

A couple weeks ago, the yard delivered the 40th FRC to the Coast Guard, not a bad job in just 12 years.

USCGC Oliver Henry (WPC-1140), note her 25mm gun has not been installed. Photo via Bollinger. 

The newest vessel, USCGC Oliver Henry (WPC-1140), was placed in commission, special status, on 30 July and will remain in Florida while the crew completes pre-commissioning trials and maintenance. The cutter is scheduled to arrive in Santa Rita, Guam, later in 2020, and will be the second of three planned FRCs stationed in Guam, an important upgrade to sea surveillance and patrol capabilities in America’s forward-deployed territorial bastion.

“The Fast Response Cutters are a real game-changer here in the Pacific for the Coast Guard,” said LCDR Jessica Conway, the Coast Guard 14th District’s patrol boat manager. “Already the FRCs stationed here in Hawaii are conducting longer missions over greater distances than the older patrol boats they are replacing.”

FRCs have a flank speed of 28 knots, a state of the art C4ISR suite, a stern launch and recovery ramp for a 26-foot over-the-horizon interceptor cutter boat, and a combat suite that includes a remote-operated Mk38 25mm chain gun and four crew-served M2 .50 cals.

Note the 25mm gun forward. Unlike older models, it is the stabilized Mod 2 variant with a day/night electro-optical sight. The Mod 2 has shown to be 3x more likely to hit a target than the eyeball-trained and manually-slewed Mod 0/1 guns.  

While listed as having a range of ~2,500nm, FRCs have deployed on 4,400nm round-trip patrols to the Marshall Islands from Hawaii– completing two at-sea refuelings from a Coast Guard buoy tender– and have shown themselves particularly adept at expeditionary operations in devastated littorals in the aftermath of hurricanes. Further, the class has deployed to the coast of South America in joint Operations Tradewinds exercises for the past two years.

U.S. Coast Guard Cutter Oliver Berry staging out of San Diego headed to Oahu,  2,600-nm West on a solo trip. Not bad for a yacht-sized patrol boat

“Here in the Pacific one of our greatest challenges is distance,” said Conway. “With the FRCs boasting a larger crew size and greater endurance, they are able to complete missions both close to shore and over the horizon, aiding both the people of Guam and our partners in the region.”

In a hat tip to the fact they are so much more capable, the USCG uses the WPC hull designation, used last by the old “buck and a quarter” 125-foot cutters of the Prohibition-era with these crafts, rather than the WPB patrol boat designation of the ships they are replacing.

Most important, later in 2020, Bollinger will be delivering the first of a half-dozen FRCs to the USCG that will be home-ported in Manama, Bahrain, to replace the 1980s-vintage 110-foot Island Class Patrol Boats supporting Patrol Forces Southwest Asia, the service’s largest unit outside of the United States. PATFORSWA is almost continually engaged with Iranian asymmetric forces in the Persian Gulf region.

Rollin Fritsch

Posted on by Leave a comment

coast-guard-cutter-rollin-a-fritch-pauses-at-the-pier-in-key-west-florida-before-heading-to-its-homeport-in-cape-may-new-jersey-september-1-2016

(U.S. Coast Guard Photo by Coast Guard Lt. Jason McCarthey/Released).

Coast Guard Cutter Rollin A. Fritch (WPC-1119) pauses at the pier in Key West, Florida, before heading to its homeport in Cape May, New Jersey, September 1, 2016.

The cutter was named after enlisted Coast Guard Silver Star recipient Rollin A. Fritch, who lost his life fighting back against a Japanese kamikaze pilot during World War II on the transport ship USS Callaway.

The USCG is building 58 of these 154-foot Fast Response Cutters which can make 28 knots and remain at sea for a week at a time. Crewed by 4 officers and 20 enlisted, they have a stabilized Mk 38 25mm chain gun forward and four M2 .50 cal singles but their main force projection is via a stern launched cutter boat that can be away with a five Coastie boarding team in seconds, ready to write up 4100s or grapple with narcos.

They run $65 million each and are set to replace the smaller 1980s-era 110-foot Island-class patrol boats (WPBs).

coast-guard-cutter-rollin-a-fritch-pauses-at-the-pier-in-key-west-florida-before-heading-to-its-homeport-in-cape-may-new-jersey-september-1-2016-2

USCG to name new Sentinel class cutter for BMCS Horne

Posted on by Leave a comment

Back in 2012 I blogged about Senior Chief Horne, who while serving on an 87 foot WPB off the California coast, lost his life.

Coast Guard Chief Petty Officer Terrell Horne III of Redondo Beach and three others were on an inflatable boat in pursuit of suspected drug smugglers in a panga. Investigators say that the panga was running dark with no lights on when it was spotted near Santa Cruz Island around 2 a.m. Sunday.

The Coast Guard cutter Halibut deployed its small boat, and the crew chased after the smugglers with its law enforcement lights on.

Authorities say the suspects suddenly turned, and at a high rate of speed, hit the Coast Guard inflatable head-on, throwing two Coast

Guard members into the water.

Horne, 34, sustained a traumatic head injury and was pronounced dead at the Port of Hueneme. The other Coast Guard member suffered minor injuries.

BMCSHorne.jpg

Well, the Coast Guard is remembering Senior Chief Horne by gracing one of the new 154-foot Sentinel class fast response cutters, now under construction at Bollinger Shipyard, with the cutterman’s name. The ship will have a heck of a monicker to live up to.

Recent Entries »