Category Archives: weapons

The chill of Autumn, and 500-pound bombs, 73 years ago today

A B-25 executes a skip-bombing attack on IJN Akishimo during the Ormoc Bay campaign,10 November 1944. US Army Signal Corps Photo A56859A

IJN destroyer Akishimo shown under attack by U.S. Army B-25 Mitchells while escorting troop convoy TA No. 4 withdrawing from from Manila to Ormoc, Philippines, on this day in November 1944.

She suffered heavy damage after taking a direct bomb hit, losing her bow and 20 sailors along with it. Two days later, while under repair at Japanese-occupied Cavite Naval Yard, she was hit by another USAAF attack and subsequently destroyed.

Akishimo (秋霜, “Autumn Frost”) was a 2,500-ton Yūgumo-class destroyer completed 11 March 1944 for the Imperial Japanese Navy. As such, she was just over eight months old in the above photo, and would never be pretty again.

Remington is really pumping out the deals

Between coupons, rebates and dealer incentives, I’ve seen the $450-MSRP Remington 870 Tac-14 (which is very new and very popular) running around $300~ as well as other deals.

What other deals?

Well the RP9, the company’s new polymer-framed striker-fired combat handgun, which MSRP’d for $489 when introduced, is now available at CDNN, Brownells and Palmetto State Armory among others for prices between $169-$199.

The Remington RP9 is a duty-sized pistol with an 18+1 capacity due to its double-stack magazine. With a 4.5-inch barrel, the overall length is 7.91-inches and weighs in at 26.4-ounces unloaded. Equipped with adjustable 3-dot sights, the slide is stainless but carries Remmy’s PVD finish.

Now that is a deal you normally don’t see unless you are dealing with a beat-up milsurp made overseas (Egyptian Helwan Brigadier, Spanish Star 9mm) or a Zamak-special such as a Hi-Point.

Sheesh. Talk about supply and demand on a glutted market.

That’s one good looking battlewagon

Here we see the North Carolina-class battleship USS Washington (BB-56) maneuvering off Oahu, Hawaii, in mid-1943 during the height of the War in the Pacific. Taken by a USS Yorktown (CV-10) photographer in beautiful original color.

(NHHC: 80-G-K-15103) Click to big up.

I always liked the North Carolina-class profile with their twin thin stacks. They look a lot like really big cruisers. The follow-on SoDaks, with their stubby hull and single fat stack and the Iowas with their twin fat stacks don’t have the same “feeling” of speed to me, even though they were actually faster.

For reference, at their 46,000-ton heaviest, the 728-foot Washington could make 26.8-knots on a 121,000 hp Babcock &Wilcox/GE plant.

The South Dakotas, at 44,519-tons with a 130,000 hp plant could still hit 27.5-knots on a tighter 680-foot hull.

In contrast, the behemoth Iowas, with a 58,000-ton full load (post-1980s modernization) were still able to pull down 30+ even in their advanced age largely due to their very impressive 212,000 total shaft horsepower– almost twice that of Washington and her sistership North Carolina, proving them to be the king of the “fast battleship” concept. This fact, that they were the only battleships with the speed required for post- VJ Day operations based on fast aircraft carrier task forces, left them still in the U.S. inventory after 1962 when the six low-mileage dreadnoughts of the North Carolina and South Dakota-classes were scrapped or, in the case of half of them, donated as museum ships while the Iowas of the same era went on to another three decades on the Naval List.

The Israelis have been busy

Last week was a big one for IWI. The Israeli gunmaker responsible for the UZI, Jericho and Galil introduced both their Masada line of 9mm polymer-framed striker-fired pistols and Tavor 7 AR bullpup rifle in 7.62×51mm NATO.

The 7 AR is slathered with an M-LOK fore-end and a removable Picatinny rail for accessories and optics, the rifle comes in two barrel lengths (17 and 20-inches) and four color patterns (Sniper Gray, OD Green, Black, and Flat Dark Earth) for a wide array of options. Overall length is listed at 28.4-inches, though it is not immediately clear which barrel length that is based on.

On the Masada, some 7.49-inches long in its full-size introductory model complete with a 4-inch barrel, the combat-style handgun tips the scales at 23-ounces unloaded. Features include an integral MIL-STD 1913 Picatinny rail for accessories, front and rear slide serrations and a cold hammer-forged polygonal rifled barrel.

More on Masada here and the 7 AR Tavor here in my Guns.com column, in case you are interested. I intend to check both out at SHOT Show in January.

Some people really like this “mid-sized deer round”

Designed in 1955 by Winchester as their answer to the vaunted .257 Roberts and .244 Remington, the .243 Winchester is fundamentally a necked down .308 cartridge case topped with a lighter (70-100 grain) bullet. It has since become one of the most popular of rounds for medium game and just about every rifle maker produces multiple offerings in the chambering– the same cannot be said of .244 and .257 today.

However, besides its use for whitetails from thin-barreled budget guns from the big box store, the .243 has a crowd of die-hard users who like it for serious target shooting to 1,000-yards and beyond.

Five-time NRA High Power Long Range National Champion John Widden only uses the .243, preferring a hand-load that hits the sweet spot.

“My .243 Win. shoots inside a 6.5 mm-284 Norma with 142-grainers,” says Widden. “Nothing out there is really ahead of the .243 Win. in 1000-yard ballistics unless you get into the short magnums or .284s—and those carry a very significant recoil penalty … I went to the .243 Win. because it had similar ballistics but had much less recoil. It doesn’t beat me up as much and is not as fatiguing.”

The guys at Long Range Shooters of Utah have an open challenge to those who can peg a milk jug with a precision rifle at extreme distances, and Chad Kinyon just pulled it off.

Rules for the challenge at LRSU are that each shooter has a maximum of 10 shots within 10 minutes and can attempt it three times in 24 hours. The distance is verified by laser rangefinder and GPS and is witnessed and officiated by LSRU.

Kinyon pulled it down on the 6th shot (who doesn’t need correction at 1,200-yards) using a Ruger Precision Rifle topped with an Athlon Argos 6-24 x 50mm scope. The round was a 115gr DTAC going 2963 FPS.

The prize? A sticker and a $100 gift cert.

But it’s a hard sticker to get.

Warship Wednesday, Nov. 8, 2017: The Real McCoy

Here at LSOZI, we are going to take off every Wednesday for a look at the old steam/diesel navies of the 1859-1946 time period and will profile a different ship each week. These ships have a life, a tale all their own, which sometimes takes them to the strangest places.– Christopher Eger

Warship Wednesday, Nov. 8, 2017: The Real McCoy

Here we see the mighty U.S. Coast Guard Cutter Seneca (CG-17), a warship that served in both World Wars and had a tussle or two while enforcing some unpopular laws.

Classified when constructed as a “derelict destroyer” for the then-U.S. Revenue Marine designed to deep-six semi-submerged vessels on the high seas while towing in those still salvageable, she was built by Newport News Shipbuilding & Drydock Company in Virginia and commissioned 12 November 1908, named after the storied Native American tribe of the Iroquois confederation formerly living in New York state.

At least four Seneca’s served in the Navy during the Civil War and Great War while a fifth, AT-91/ATF-91, was a 205-foot Navajo-class fleet tug built during WWII and sunk as a target in 2003. However, the Revenue Service cutter that is the subject of this post was the first cutter by that name.

Built at a price of $244,000, she was a follow-on to the five modern cutters ordered at the turn of the Century, that, at 200~ feet and 1,200-tons were decent steel-hulled vessels that could serve their peacetime use as well as be capable modern naval auxiliary gunboats in times of conflict.

Constructed with lessons learned from those craft, the one-off Seneca tipped the scales at 1,259-tons and went 204-feet overall. Able to float in 18-feet of seawater, her twin boiler plant could chug her along at an economical 12-knots. A quartet of 6-pounders (57mm guns) and a supply of naval mines and explosives for scuttling completed her armament.

Early in her career, with black hull and buff stack

Her first “job” was helping to police the massive Hudson-Fulton international naval parade in New York. Her commander during the Hudson-Fulton parade was Captain J. C. Cantwell, USRCS, and she was shown off to both visiting dignitaries and naval personnel.

Seneca immediately went to a harder line of work, in 1909 towing the stricken White Star liner RMS Republic, which sent the first wireless distress signal in history via the then-novel Marconi apparatus after the vessel was mortally wounded in a collision with the steamer Florida off Nantucket.

Then, of course, there was the derelict duty and anti-smuggling work.

Seneca with a derelict in tow

As part of her tasking to destroy derelicts, Seneca put to sea from New York on 10 Feb 1910 following a report from the Dutch steamer Prins Wilhelm III of a dismasted, waterlogged sailing vessel far offshore. After searching all day, Seneca found the battered and broken three-masted schooner Sadie C. Sumner of Thomaston, Maine, nearly swamped but with a cargo of cypress timber. Over the course of the next four days, Seneca had to pull the reluctant schooner to port, losing the tow at least three times in heavy seas. She finally made Hampton Roads in one piece.

In March 1913, Seneca responded to the first International Ice Patrol, established in the aftermath of the sinking of the RMS Titanic. Operating out of Halifax, Nova Scotia and ranging as far as Iceland, Seneca made no less than 10 patrols in the next three years looking for wandering ice, on one occasion saving adrift survivors of the British freighter Columbian.

During this time the Revenue Marine became part of the new Coast Guard, and Seneca changed her title and took part in the increasingly tense neutrality patrol work as the world descended into the Great War.

Upon the U.S. Declaration of War against the Kaiser in April 1917, the new service became part of the Navy. Accordingly, Seneca landed her battery of 6-pounders, picked up a new one of a quartet of 3″/50 cal guns, and for the next 28 months served as a haze gray colored gunboat for the Navy.

Seneca was assigned to Squadron 2, Division 6, of the Atlantic Fleet Patrol forces, heading to Europe along with the other large blue water cutters on convoy escort and general anti-submarine missions. Assigned to Base 9 (Gibraltar), Seneca joined the cutters Algonquin, Manning, Ossipee, Tampa, and Yamacraw.

USCGC Seneca. Description: (Coast Guard Cutter, 1908) Members of the ship’s crew pose on board, circa 1917-1918. The original image is printed on postcard stock. Donation of Charles R. Haberlein Jr., 2009. U.S. Naval History and Heritage Command Photograph. Catalog #: NH 106709

Venturing into U-boat-infested seas proved dangerous for the small group of cutters. The small Ossipee, 165-feet of rock and roll, escorted an impressive 32 convoys consisting of 596 Allied vessels and made contacts with enemy submarines on at least 8 occasions, on one of these reportedly side-stepping a torpedo by about 15 feet. Tampa was not so lucky, sunk just six weeks before the end of the war by a torpedo hit with all hands; 111 Coast Guardsmen, 4 U.S. Navy personnel, and 16 passengers.

Seneca herself ran 30 convoys and escorted 580 ships, plucking 81 survivors from the torpedoed RN sloop HMS Cowslip in April. 1918 off Gibraltar, and 27 survivors from the stricken British freighter SS Queen in June.

Then came the Wellington.

Part of the 21-ship Convoy OM-99, outbound from Milford Haven to Gibraltar, the 5,600-ton freighter Wellington suffered an explosion that blew the first 30-feet off her bow and Seneca, responding to the scene, chased off a surfaced U-boat with her 3-inchers. Sending over a 20-man crew of volunteers to help keep the coal-laden merchantman from foundering with the hopes of making for Brest, about 350 miles away on the French coast.

While they could slow the flooding, and make 7.5-knots, a storm set in and the act turned hopeless, with 1LT Fletcher W. Brown ordering the boarding crew and remaining Wellington sailors to abandon ship and take their chances in the water.

Coast Guard Cutter SENECA places a damage control crew on board the torpedoed tanker WELLINGTON in an attempt to keep it from sinking September 16, 1918.

However, 11 went down with the freighter and were awarded the Navy Cross for their heroism while Acting Machinist William L. Boyce received the Navy Distinguished Service Medal for staying in the engine room until the very end. The final message from Wellington, sent by Electrician 2nd Class Morrill C. Mason, USCG: “We are turning over, you’ve done everything you could. Goodbye.”

In all, Seneca received three letters of commendation from the Admiralty for her service in Europe. She fired upon or dropped depth charges on no less than 21 occasions, often credited with sinking one submarine, though post-war analysis never firmed that up.

USS SENECA (1917-1919) Flying homeward bound pennant. Description Catalog NH 108752

Chopping back to Coast Guard duty in 1919, she picked up her white scheme, but she still had another battle to fight.

Once enforcement of the Volstead Act began in January 1920, it was the Treasury Department that was given the unpopular task of enforcing Prohibition, and “T-men” of the newly formed Bureau of Prohibition (which became ATF in 1930 and was transferred briefly to the Justice Department) became a popular term at the time for those engaged in the act of chasing down bootleggers, speakeasies and those with hidden stills. It should be noted that Elliot Ness and his “Untouchables” were T-men and not G-men of the FBI, as is commonly believed and for every public hero of the force, there were heavy-handed and unprofessional agents such as “Kinky” Thompson who gave the work a black eye– literally.

Nevertheless, as a branch of the Treasury going back to the days of Alexander Hamilton, the Coast Guard became responsible for enforcement on the seas, fighting booze pirates and rum-runners smuggling in territorial waters. The agency was hard-pressed to chase down fast bootlegging boats shagging out to “Rum Row” where British and Canadian merchantmen rested on the 3-mile limit loaded with cases of good whiskey and rum for sale.

This led the agency to borrow 31 relatively new destroyers from the Navy, an act that would have been akin to the USN transferring all the FFG7 frigates to the Coast Guard during the “cocaine cowboy” days of the 1980s.

However, Seneca and the other legacy cutters held their own as well.

Seneca, August 4, 1922, Harris & Ewing, photographer, via LOC

One of the more infamous on Rum Row was William “Bill” McCoy, a graduate of the Pennsylvania Nautical School in Philadelphia who went on to sail the seven seas for two decades before he opened a boatyard in Florida. Picking up first one schooner and then another, the 130-foot British-flagged Arethusa which he renamed Tomoka, McCoy specialized in running liquor from the Bahamas and Bermuda as well as from the French islands of Saint-Pierre and Miquelon (where Arethusa flew a French flag and went by the name Marie Celeste) to New England, reportedly making $300,000 in profit for each trip. His profits were high because he never stepped on his booze and cut it with water, with his whiskey being passed off as “the real McCoy.”

It was a night in November 1923 when Seneca came across McCoy and his hooch-laden Arethusa off the New Jersey coast.

From Rum Wars at Sea:

Agents in cooperation with the Coast Guard put into effect without warning the principal of search and seizure beyond the 3-mile limit, realizing the likelihood of legal complications. The cutter Seneca arrived near Tomoka at daybreak and found the schooner riding placidly at anchor. The ship was first boarded by agents, and as soon as they were on board a fist fight developed in which all hands took part. The agents, though badly beaten up, were able to search her and found 200 cases of whiskey remaining from an original cargo of 4,200. Then Tomoka got underway with the agents on board. Seneca ordered her to stop. When she disregarded this, the cutter sent two shots screaming across her bows with the desired result. She was then boarded by a larger group of coast guardsmen from Seneca and seized.

It was the end of McCoy’s rum-running days and he soon headed off to federal prison on an abbreviated sentence, with Arethusa sold at public auction.

Still, Seneca proved a scourge for those who remained in the business.

Aboard the Coast Guard Cutter Seneca, Prohibition agents examine barrels of alcohol confiscated from a rum runner boat. Via LOC

Aboard the Coast Guard Cutter Seneca, Prohibition agents stand amidst cases of scotch whiskey confiscated from a rum runner boat. Via LOC

One of the rum runners against its nemesis: the K-13091 alongside the Coast Guard cutter Seneca at the end of the chase, 1924. Via LOC. Note the 1903s and BAR

Badly worn out, Seneca was placed out of service in 1927-28 for reconstruction and spent the rest of Prohibition stationed in New York, transferring to San Juan in 1932 and Mobile in 1934. Showing her age, she was decommissioned 21 March 1936 and stored at the Coast Guard Yard in Baltimore to make room for the new 327-foot Treasury-class cutters then under construction.

In September, the 28-year-old disarmed cutter was sold to the Boston Iron and Metal Co., of Baltimore, Maryland for $6,605, who did nothing with her and subsequently resold her to the Texas Refrigeration Steamship Line to turn into a banana boat on the Guatemala to Gulfport run. However, TRSL went bankrupt and Seneca never left Baltimore, leaving her to be reacquired at auction by Boston Iron, who still owned her in 1941 and weren’t doing anything with the old girl.

With another war coming, the Coast Guard took Seneca back into service in 1941. However, she was deemed to be in too poor a condition for escort duty and was instead shuffled to “The Real” McCoy’s alma mater, the Pennsylvania Nautical School in Philadelphia for use as a training vessel. Seneca, renamed Keystone State, replaced the old 1,000-ton gunboat USS Annapolis in September 1942.

During this time, admission requirements at the school were raised to high school graduates between the ages of 17 and 20 years and students were instructed in dead reckoning, the duties of an officer; theoretical and practical marine engineering; and in handling boats. Some 2,000 young men cycled through the school in the war years.

In April 1946, the Maritime Commission made the newly-decommissioned Artemis-class attack cargo ship USS Selinur (AKA-41) available to the school as Keystone State II, and Seneca was returned.

She was scrapped in 1950, one of the last vessels built for the Revenue Marine Service still afloat at the time.

Seneca, however, is well remembered.

In 1928, the U.S. Coast Guard Memorial at Arlington National Cemetery, honoring the service’s war dead in general and those lost on Tampa and Seneca during WWI in particular, was dedicated.

The Coast Guard command holds a Veteran's Day ceremony at Arlington National Cemetery in Arlington, Va., Nov. 11, 2012. The area where the Coast Guard World War I memorial, which honors the fallen crew members of the Cutter Seneca and Cutter Tampa, was placed is commonly referred to as Coast Guard Hill. U.S. Coast Guard photo by Petty Officer 1st Class Timothy Tamargo

The Coast Guard command holds a Veteran’s Day ceremony at Arlington National Cemetery in Arlington, Va., Nov. 11, 2012. The area where the Coast Guard World War I memorial, which honors the fallen crew members of the Cutter Seneca and Cutter Tampa, was placed is commonly referred to as Coast Guard Hill. U.S. Coast Guard photo by Petty Officer 1st Class Timothy Tamargo

From Arlington:

Architect George Howe and sculptor Gaston Lachaise captured the spirit of the Coast Guard’s legendary steadfastness in the monument’s rock foundation and pyramid design. Above the Coast Guard motto Semper Paratus (meaning “Always Ready”), is a bronze seagull with its wings uplifted. The seagull symbolizes the tireless vigil that the U.S Coast Guard maintains over the nation’s maritime territory.

Further, the centennial medals issued by the U.S. Mint in 2018 honoring the service’s participation in the Great War depicts a lifeboat from the Coast Guard Cutter Seneca heading out in heavy seas toward the torpedoed steamship Wellington.

Coast Guard Cutter Seneca heading out in heavy seas toward the torpedoed steamship Wellington.

Her name was recycled for the “Famous” class 270-foot Medium Endurance Cutter, WMEC-906, was commissioned in 1987 and is homeported in Boston.

Specs:

Tonnage: 1,259 tons (gross)
Length: 204 ft.
Breadth: 34 ft. Breadth
Draft (or Depth): 17.3 ft. (depth)
Engines: Two Scotch boilers, one triple expansion steam engine, one shaft.
Speed: 11.2 knots
Crew: 9/65 designed, 110 wartime
Armament: (1908) 4- 6pdrs
(1917) 4 3″/50 cal guns, depth charges
(1937) disarmed

If you liked this column, please consider joining the International Naval Research Organization (INRO), Publishers of Warship International

They are possibly one of the best sources of naval study, images, and fellowship you can find. http://www.warship.org/membership.htm

The International Naval Research Organization is a non-profit corporation dedicated to the encouragement of the study of naval vessels and their histories, principally in the era of iron and steel warships (about 1860 to date). Its purpose is to provide information and a means of contact for those interested in warships.

With more than 50 years of scholarship, Warship International, the written tome of the INRO has published hundreds of articles, most of which are unique in their sweep and subject.

PRINT still has its place. If you LOVE warships you should belong.

I’m a member, so should you be!

Australian SAS belt kit, as worn in Vietnam by Don Barnaby, F Troop, 2 Sqn SASR

Description via AWM:

A composite webbing set, consisting of standard US pattern waist belt, metal buckle and ‘H’ harness suspender. The suspender has been modified with the addition of five nylon webbing M79 40 mm grenade pouches, cut from a US Air Force survival vest, which are attached vertically down each front suspender strap. A blackened round brass press button secures each grenade pouch cover.

Worn at the back of the belt is a large Australian 1937 Pattern basic canvas pouch and a British 1944 Pattern water bottle and carrier. In place of the standard Australian issue basic pouches at the front are twin US Special Forces M16 5.56 mm magazine pouches and two compass pouches, one containing insect repellent.

Attached to the 1937 Pattern pouch is another compass pouch, containing another insect repellent container and inside the pouch is a field dressing. The webbing set has been hand camouflaged by adding random blotches of green and black paint. A US issue plastic M6 bayonet scabbard is also attached.

Photograph from the Australian War Memorial, and is their property and copyright. They have a great collection of his gear on hand.

2 SQN, SASR packing list 1971,from “Vietnam ANZACs” Kevin Lyles, Osprey Publishing, 2004:

Equipment carried by each patrol member:

Weapon and ammunition, to include at least two XM148/203 and two L1A1 SLR per patrol

Compass & Map
Emergency/survival pack
Shell dressing (FFD)
Emergency smoke containers x 2
Water containers

The following to be carried on the belt or in pockets, not in pack:

UHF radio (secured by cord)
Individual sheath knife
Shell dressings (FFD)
Ammunition (except Claymores)
Smoke grenades

Ammunition, minimum scales per man (weapon dependent)
7.62mm 160 rounds
5.56mm 200 round
40mm HE & Canister x 10
40mm purple smoke x 2
M34/M67 x 1

Grenades (per patrol)
Red Smoke x 5
Yellow smoke x 5

Australian SAS captain Peter Shilston as Mike Force company commander–note the WWII-style BAR belt used for 20 round M16 mags and tiger camo

And just like that…they were gone

USS Houston, CA 30 valiantly fights on alone during the night of February 27-28, 1942 against an overwhelming Japanese Naval Force. “They Sold Their Lives Dearly” by Tom Freeman.

The Guardian has a great interactive piece on the prolonged phenomena that is the rapid disappearance from the ocean floor of WWII ship wrecks in Indonesia including the battered veterans of the Battle of Java and others.

Fueled by a a booming demand in China for scrap metal, large crane barges have been photographed above wreck sites, often with huge amounts of rusted steel on their decks.

“At the seabed, divers have found ships cut in half. Many have been removed completely, leaving a ship-shaped indent.”

Why all the risk and expense to rob war graves for scrap steel? It’s not just your typical scrap steel.

Archeologists believe the criminals might be turning a profit because the hulls are one of the world’s few remaining deposits of “low-background” metals. Having been made before atomic bomb explosions in 1945 and subsequent nuclear tests, the steel is free of radiation. This makes even small quantities that have survived the saltwater extremely useful for finely calibrated instruments such as Geiger counters, space sensors and medical imaging.

More here.

Getting in touch with that flashlight technique

While weapon mounted lights are increasingly the norm, carrying around a broad selection of low/no-light shooting skills in your toolbox will keep you well-lit in even the darkest of situations.

Going back to the era of the old town watch of Colonial times, which employed men who were armed with a sword or polearm and a lantern, it has always been preferable for those wandering about in sometime perilous conditions to have both a weapon for self-defense and some portable illumination to know when to use it.

Today it is no different.

Woe is the EDC practitioner who carries a defensive handgun without a light and no access to one on their person. Let’s face it, in your typical 365-day cycle, about half of that time is spent at night or in twilight, while the prospect of our species, as predominantly urban dwellers, to be thrown into pitch dark at high noon as we move about our homes or offices– due to a simple thrown light switch or power outage– has never been higher.

The Neck/eye/cheek Index flashlight technique, one of six that I cover after the jump

More in my column at Tac.44.com

 

That Key West experience

“Military Men standing by a small gun. Fort Zachary Taylor. Key West. 1918. Monroe County Library”


Looks like a 3-inch gun on a masking parapet mount without the gun shield (which would have gone on the hooks) mounted. Taylor had six of these guns in two batteries (Adair and Dilworth) between 1899-1920 during the installation’s Endicott Period, which would correlate to the uniforms, which curiously are Naval though the fort was an Army Coastal Artillery post. Perhaps they were just checking out the landlubber’s gun…

From the position, it looks like Battery Adair, which mounted four Driggs-Seabury low-angle 3-inchers in M1898MI mounts, emplaced to cover controlled minefields leading up to the fort’s masonry walls. The battery was named after the late 1st Lt. Lewis D. Adair, 22nd U.S. Infantry, who died 5 Oct 1872, of wounds received in action with Sioux Indians at Heart River Crossing, Dakota Territory. Adair, who at the time of his last battle was fifteen miles from Heart Butte, on Heart river, while on duty with his company escorting the Northern Pacific Railroad survey of the area, was reportedly given his death blow by the great Hunkpapa Sioux chief Gall.

According to Fort Wiki, the end of the Great War ended the battery’s usefulness and “On 27 Mar 1920 all four guns were ordered removed and the carriages salvaged. The guns were transferred to Watervliet 17 Sep 1920 and the mounts were scrapped 20 May 1920.”

« Older Entries Recent Entries »